Page 3 of 4 P/N G0200138 Rev B, 1.1.06.27.2012
ClearCube Technology, Inc. 8834 Capital of Texas Hwy N Austin, TX 78759 (512) 652-3500 www.clearcube.com
Setting up ClientCube, Continued
The table below shows how to set up ClientCube.
Follow the steps in the order listed below—be sure to connect all video cables
before connecting power to ClientCube (note that connecting power
automatically powers on ClientCube).
Connect Ethernet or fiber cables to ClientCube zero clients.
Connect one or more displays to the Secure KVM Console Monitor Port(s).
Connect a keyboard and mouse to the Console portion of the Secure KVM.
Optionally, connect speakers and a CAC reader to the Console portion of the Secure
KVM.
Connect the ClientCube power cable to a power outlet, then connect the power
adapter to ClientCube.
Result: Secure KVM and zero clients power on.
Procedure:
configure and
connect
The table below shows how to configure zero clients and remote hosts, and how to connect.
Configure zero clients using the zero client on-screen display (OSD).
Note: For more information about the OSD and configuration, see the appropriate
zero client Quick Start Guide (included) and PC-over-IP System User’s Guide
(download from ClearCube Support) for more information.
If you are using physical devices with PCoIP Host Cards, use a Web browser and the
Host OSD to configure the host card as appropriate for your environment. For more
information, see the documentation cited above.
From the zero client OSD, click Connect.
Result: If you are using direct connection or reserved DHCP addresses, you are
connected to the remote host specified during configuration. If you are using DHCP
and device discovery, a list of available hosts is displayed. Select a host to connect to.
The list below shows additional ClientCube configuration steps.
Optionally, install ClientCube accessories including color chips to distinguish each port button, and
name labels to identify each network. See Secure DVI-I KVM User Manual for more information.
Optionally, mount the ClientCube using the ClientCube Mounting Bracket (not included). See “Pre-
Configuration” in Secure DVI-I KVM User Manual for additional information about placement
considerations.
