Clear One Aura Xceed BMA Manuel utilisateur

Quick-Start Guide

Xceed™ BMA

AUDIO SOLUTION

Xceed™ BMA

iQSG-0091-002v1.2 May 2021

Information in this document is subject to change without notice.

Document: QSG-0091-002v1.2, May 2021

Notices

Contact Information

Headquarters

5225 Wiley Post Way

Suite 500

Salt Lake City, UT 84116

US: +1.801.975.7200

International: +1.801.975.7200

Aura Sales

US: +1.888.HEY.AURA

International: +1.801.975.7200

[email protected]

Aura Tech Support

US: +1.888.HEY.AURA

International: +1.801.975.7200

[email protected]

Xceed™ BMA

ii QSG-0091-002v1.2 May 2021

Notices .....................................................................................................i

Important Safety Information ................................................................. iii

Introduction............................................................................................ iv

Operating and System Requirements ................................................... iv

System Part Number.............................................................................. iv

Components ...........................................................................................5

Install the Components...........................................................................7

Connect the Components ......................................................................8

Troubleshooting ....................................................................................11

Pair a Bluetooth Device.........................................................................11

Compliance...........................................................................................11

Contents

Xceed™ BMA

iii QSG-0091-002v1.2 May 2021

Important Safety Information

1. Read and follow all instructions.

2. Keep these instructions.

3. Do not use these devices near water.

4. Clean only with dry cloth.

5. Do not block any ventilation openings. Install in accordance with manufacturer instructions.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

7. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or

the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician

for replacement of the obsolete outlet.

8. Protect the PoE injector’s power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

9. Only use attachments/accessories specified by the manufacturer.

10. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in

any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

13. Disconnect the apparatus from the AC mains with the mains plug. This plug shall remain readily operable.

14. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage

points or short out parts that could result in fire or electric shock.

15. This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers and

microwave ovens if placed in close proximity.

16. Class 2 Wiring IS REQUIRED. Only qualified personnel should wire and install.

17. Underwriters Laboratories (UL) requires these safety notifications:

WARNING: TO

PREVENT FIRE

ELECTRICAL

SHOCK

HAZARD, DO

NOT EXPOSE

THIS

PRODUCT TO

RAIN OR

MOISTURE

THE LIGHTING FLASH

AND ARROWHEAD

WITHIN THE TRIANGE IS

A WARNING SIGN

ALERTING YOU OF

DANGEROUS VOLTAGE

INSIDE THE PRODUCT.

THE EXCLAMATION POINT

WITHIN THE TRIANGLE IS A

WARNING SIGN ALERTING

YOU OF IMPORTANT

INSTRUCTIONS

ACCOMPANYING THE

PRODUCT.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

SEE MARKING ON BOTTOM/BACK OF PRODUCT

RISK OF ELECTRIC SHOCK DO

NOT OPEN

AVIS RISQUE DU CHOC ELECTRIQUE

- NE PAS OUVRIR

Use only in

non-tropical

locations.

Use only at

altitudes of

2000 meters

or less.

CAUTION

Xceed™ BMA

iv QSG-0091-002v1.2 May 2021

Introduction

The Xceed BMA dramatically enhances the audio and video experience for any cloud-based video collaboration

application for your professional home office. It features a USB audio-enabled Beamforming Ceiling Tile Microphone

Array that brings cost-effective and superb conferencing audio to your professional home office.

The BMA CTX with built-in AEC, and adaptive steering (think of it as smart switching), provides impeccable room

coverage.

Also included in the Xceed BMA are the following:

• Versa USB

• PoE Injector

• All necessary CAT6 cables

• Free COLLABORATE®Space lifetime subscription - ClearOne’s cloud-based video collaboration application

COLLABORATE Space Pro

COLLABORATE Space is a powerful collaboration application with a full suite of audio, video, and meeting

tools in a persistent space.

Connect hundreds of users, unifying messaging, calling and meetings for cloud collaboration.

Optional ClearOne Peripherals

The following components are available to enhance your system:

• AUR-3200-303 Bluetooth Wall

Panel

• 910-3001-100 Versa USB Hub

• AUR-151-010-B Passive Wall

Speakers

• AUR-3200-204-50 RJ45 CAT6

Cable – 50 ft.

• 910-3200-702-30 USB 3.0 Cable

– 33 ft.

• 693-153-050 Speaker Cable – 50

ft.

Operating and System Requirements

System Power and Thermal

• Port Type: RJ-45

• Power Source: PoE Injector or equivalent

• PoE: IEEE 802.3at compliant devices providing 56V and 640 mA (36 W).

• 100-240 VAC, 50/60 Hz, 3 Watts Typical

• 34 W at max power 1 kHz (2 x 10 W)

• Thermal: 130 BTU/Hr at max power

• Operating Temperature: 14 °F/-10 °C to 104 °F/40 °C ambient temperature

System Part Number

• Xceed BMA: AUR-3200-010

• Xceed BMA International: AUR-3200-010-I

Xceed™ BMA

5QSG-0091-002v1.2 May 2021

Components

Verify that you have received all parts associated with each of the following components:

1. BMA CTX

2. BMA Surface Mount Kit

3. Versa USB

4. PoE Injector Kit

5. CAT6 Cables

Inspect your shipment carefully.

If the shipment shows obvious signs of damage, retain original boxes and packing material for inspection by the carrier,

and contact the carrier immediately.

ClearOne is not responsible for product damage incurred during shipment.

Basic Xceed BMA Connections

The steps listed below and the

accompanying illustration describe

how to connect your Xceed BMA.

1. On the Versa USB, move the

Power Select switch to the PoE

In position.

2. Connect the Versa USB P-Link

Out port to the BMA CTX P-Link

In port.

3. On the BMA CTX, move the

Power Select switch to the

P-Link In position.

4. Connect the PoE injector to the

Versa USB PoE In port.

5. Connect the Versa USB Audio

port to your computer’s USB

port.

Important details related to installation, connections and testing, are provided in the following sections.

Xceed™ BMA

6QSG-0091-002v1.2 May 2021

1. BMA CTX

BMA - CTX (1) Plenum shield (1)

2. BMA Surface Mount Kit

4. PoE (Injector) Kit

CAT6 cable,

Black, 25 ft. (1)

CAT6 cable,

Blue, 25 ft. (1)

Power cord, 6 ft.Power supply (1)

3. Versa USB

Versa USB (1) USB cable, 6 ft (1)

Frame piece (4) L-shaped spring clip (4)

Includes Installation Guide

5. CAT6 Cables

CAT6 cable,

50 ft. (1)

Xceed™ BMA

7QSG-0091-002v1.2 May 2021

Install the Components

BMA CTX

1. Optional:

On the BMA CTX back panel (see Figure 1 on page 8), with speaker wire (not included), connect two loudspeakers

to the Phoenix Euroblock connectors (a)

2. Move the Power Select sliding switch (c) to the right, towards the P-Link In connector (d)

3. Complete the steps indicated in the BMA Surface Mount Kit Installation Guide

Versa USB

You can mount the Versa USB in the following ways:

• On the underside of a table

• On a wall

Note: Mounting hardware such as screws and anchors are not included with the Versa USB.

Required Tools

• No. 1 Phillips screwdriver

• T15 Torx screwdriver

• Level (to level the Versa USB)

• Drill bits appropriate for anchors

• Electric drill

• Drywall saw (for cutting hole in wall or ceiling)

Mount the Versa USB on the Underside of a Table

Select your hardware based on your specific installation needs.

1. Determine the location for the Versa USB.

2. Use a pencil to mark on the table the location of four mounting

holes that align with the mounting holes on the Versa USB

mounting ears.

3. Determine the proper depth and diameter for the holes.

4. Drill four pilot holes for #6 or M3.5 screws.

5. Align the mounting holes on the Versa USB mounting ears with

the pilot holes.

6. Use four #6 or M3.5 screws to attach the Versa USB to the

table.

Mount the Versa USB on a Wall

Select your hardware based on your specific installation needs.

1. Determine location for the Versa USB.

2. Use a pencil to mark on the table the location of four mounting holes that align with the mounting holes on the

Versa USB mounting ears. If needed, use a level.

3. With the proper size drill bits, drill four pilot holes for fasteners/anchors.

Xceed™ BMA

8QSG-0091-002v1.2 May 2021

4. Install the fasteners/anchors in the wall.

5. Align the mounting holes on the Versa USB mounting ears with the pilot holes.

6. Use four #6 or M3.5 screws to attach the Versa USB to the wall.

Note: Anchors and screws to mount the Versa USB are not provided. The installer must select them for the wall

material that supports the Versa USB. Exercise care when you drill and install anchors so wall material does not tear

out and weaken the attachment.

Description of Controls and Connections

Connect the Components

BMA CTX

abc d e

Figure 1. BMA CTX Back Panel

a Speakers Out. Two Phoenix Euroblock connectors for external 8 ohm speakers

PoE In: RJ45 connector. The Xceed BMA does not use this connector.

The Versa USB provides power to the BMA CTX through the P-Link In

connector.

Power Select sliding switch. Position determines power source – either left for

PoE In or right for P-Link In.

With a Xceed BMA, this switch is set to the right for P-Link In.

dP-Link In: RJ45 connector. Receives power, audio, and control from the Versa

USB.

P-Link Out: RJ45 connector.

Connects to another P-Link device that requires power, such as a Bluetooth Wall

Panel.

Warning:

Power over Ethernet (PoE) equipment used with Xceed BMA must meet the IEEE 802.3af or 802.3at

standards.

You should use the PoE Power Injector provided with Xceed BMA. Other power source equipment may

immediately apply power and could damage the Xceed BMA components.

Xceed™ BMA

9QSG-0091-002v1.2 May 2021

Versa USB

Figure 2. Versa USB Front Panel

Status Indicator

LED Color Meaning

Not lighted No P-Link plugged in

Solid Blue P-Link plugged in; system working normally

Solid Red Error condition

Power Indicator

LED Color Meaning

Not lighted Off - not powered

Solid Blue Powered

Figure 3. Versa USB Back Panel

f RS-232. These are not used with Xceed BMA.

g USB Type B connector. Connects to computer.

h P-Link In. RJ45 connector.

i P-Link Out. RJ45 connector. Connects to BMA CTX.

j Power Select sliding switch. Position determines power source – left for P-Link In or right for PoE in.

With ax Xceed BMA, this switch is set to for PoE In.

k PoE In. RJ45 connector. Connects to the PoE Injector.

PoE Injector

y RJ45 connector. Used to provide power to Versa USB.

z RJ45 connector. Not used.

Figure 4. PoE Injector Connectors

Table des matières

Autres manuels Clear One Système de conférence

Clear One

Clear One CONVERGE PRO 2 Manuel utilisateur

Clear One

Clear One Versa Mediabar Aura Manuel utilisateur

Clear One

Clear One Converge Pro TH20 Manuel utilisateur

Clear One

Clear One COLLABORATE Live 600 Manuel utilisateur

Clear One

Clear One VERSA PRO CT Manuel utilisateur

Clear One

Clear One Converge Pro 880 Manuel utilisateur

Clear One

Clear One Converge Pro 880TA Manuel utilisateur

Clear One

Clear One XAP 800 Manuel utilisateur

Clear One

Clear One AP400 Manuel utilisateur

Clear One

Clear One COLLABORATE ROOM PRO Manuel utilisateur

Clear One

Clear One Aura VERSA PRO 150 Manuel utilisateur

Clear One

Clear One COLLABORATE ROOM Series Manuel utilisateur

Clear One

Clear One COLLABORATE ROOM PRO Manuel utilisateur

Clear One

Clear One XAP 80 Manuel utilisateur

Clear One

Clear One COLLABORATE Room Guide de l'utilisateur

Clear One

Clear One COLLABORATE Versa Pro 50 Manuel utilisateur

Clear One

Clear One MAX WIRELESS Manuel utilisateur

Clear One

Clear One AP400 Manuel utilisateur

Clear One

Clear One CONVERGE Huddle Manuel utilisateur

Clear One

Clear One XAP 400 Manuel utilisateur

Clear One

Clear One INTERACT PRO Manuel utilisateur

Clear One

Clear One Chat 50 Manuel utilisateur

Clear One

Clear One COLLABORATE ROOM PRO Manuel utilisateur

Clear One

Clear One AP800 Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur