Clear Dash HD X-1000 Manuel utilisateur

Owner’s

Manual

High-Denition

Automotive

Video Recorder

Warranty information inside.

CDHD-X1000_IB_TP_ENG_V1_170117.indd 1 2/3/17 4:53 PM

CDHD-X1000_IB_TP_ENG_V1_170117.indd 2 2/3/17 4:53 PM

Notice: Windshield Mounting Legal Restrictions

Before mounting Clear Dash HD on windshield, consult state and local ordinances. Some

states may outlaw suction mounts while driving or regulate where suction mounts are located

in your vehicle. Many states have restrictions against “non-transparent material” on a car

windshield that may obstruct the driver’s view.

Warning: This product and its components contain chemicals known to the state of

California to cause cancer, birth defects,

or reproductive harm. This Notice is being provided in accordance with California’s

Proposition 65. If you have any questions or would like additional information, please refer to

www.oehha.ca.gov/prop65/background/p65plain.html.

Ensure proper disposal of the rechargeable battery.

The battery contained in this device is lithium ion. To locate a battery recycling center

near you, call 1-800-8-BATTERY or 1-877-2-RECYCLE for proper disposal.

IMPORTANT SAFETY INFORMATION

• Do not expose Clear Dash HD to rain or moisture.

• Clear Dash HD is intended for use in a motor vehicle. Do not install the product where it will

block the driver’s view of the road (including mirrors) or the deployment of airbags.

• Keep your attention on the road! Do not try to operate or focus on device while driving. If you

have to concentrate on or adjust the device, pull over to the side of the road for a moment.

• Make sure the camera lens is kept clean and there is nothing blocking the lens.

• Do not leave Clear Dash HD in direct sunlight for a long period of time or where the temperature

could go above 140°F (60°C).

CDHD-X1000_IB_TP_ENG_V1_170117.indd 3 2/3/17 4:53 PM

14 15 16

Clear Dash HD Features & Functions

1. 5V Mini USB Power Input Jack

2. Memory Card Slot

3. AV Out

4. Speaker

5. Bracket Hole

6. Microphone

7. Battery Cover

8. Lens

9. Motion Sensors

10. On/Off Button - Charge Indicator

11. Record/Photo/In-Use Indicator/Select

12. 2.5” Color Display

13. Menu Button

14. Down Button

15. Up Button

16. Mode (Record/Photo/Preview)

17. Suction Mounts to Windshield

18. Adjusts Angle / 360° Pivot

CDHD-X1000_IB_TP_ENG_V1_170117.indd 4 2/3/17 4:53 PM

Mode

Day/Night

Setting

Memory

Card

Video

Resolution

Record

Time

Battery Fill

Indicator

Date & Time Stamp

Clear Dash HD

Screen Features

CDHD-X1000_IB_TP_ENG_V1_170117.indd 5 2/3/17 4:53 PM

INCLUDES:

1. Power Port Car Charger with Mini USB Cable

2. Lithium Ion Battery

3. USB to Mini USB Charging Cable

4. Memory Card

Clear Dash HD

Accessories

CDHD-X1000_IB_TP_ENG_V1_170117.indd 6 2/3/17 4:53 PM

Clear Dash HD

Operating Instructions

Getting Started

1. Remove battery from protective packaging

and insert into unit.

2. Insert memory card into memory slot.

3. Mount unit on dash or window of vehicle

with camera facing the area to be

recorded.

Mounting to Dash with Suction Cup

a. Attach Clear Dash to the suction

mount by screwing mount into bottom

of cam.

b. Locate a suitable position to mount

the dash cam. Do not obstruct visibility

for driving.

A smooth surface is needed for

suction cup to secure properly.

c. Make sure surface is clean as well as

suction cup.

d. Press suction cup to surface and

switch lever.

e. Test Mount to make secure. If loose

repeat process.

4. Connect unit to power supply.

5. Press and hold ON/OFF button to turn on.

6. Press REC button to start/stop recording.

Check video screen and adjust unit

position for best picture recording.

Battery must be charged for rst use.

Charge battery for 3 hours.

Setting Time and Date.

• Press Menu button one time, then press

Mode button to enter setup.

• Scroll UP or DOWN to Date &Time.

• Press REC button.

• Press UP or DOWN key to select Date.

Press REC button to accept.

• Press MENU to Exit.

CDHD-X1000_IB_TP_ENG_V1_170117.indd 7 2/3/17 4:53 PM

Note:

1. If the unit does not turn on after charging, Disconnect power, remove

battery and reinstall to active it. Reconnect power.

2. Please do not take out the battery or memory card during unit working,

otherwise unit program and screen display will be easy damaged.

2 Modes of Operation:

1. Operation by Car Power Port (12/24V)

a. Using Power Port cable, plug micro USB end into Clear Dash HD and the other end into the

Power Port/cigarette lighter or…

b. Using USB cable, plug micro USB end into Clear Dash HD and the USB end into a USB power

adapter or USB connection.

c. The Clear Dash HD will charge the lithium ion battery while it operates on the car’s

electrical power. The red light will display when unit is charging and will remain on when

power is connected.

d. Clear Dash HD will begin recording automatically when car ignition is turned on.

e. When car ignition is turned off, Clear Dash HD turns off automatically and a le of the

recording is saved automatic.

2. Operation by Rechargeable Lithium Ion Battery

a. Charge the Clear Dash HD as per instructions above. The charge of battery can be seen by

the battery strength meter located on the screen in the lower left corner.

b. To use by battery power, press ON/OFF button to start and stop recording.

CDHD-X1000_IB_TP_ENG_V1_170117.indd 8 2/3/17 4:53 PM

NOTE: Use USB adapters that supply an output voltage of 5V-1A.

• Do not overcharge the battery.

For most cars, power ports or USB ports will turn off when ignition is off. Some cars have power

and USB ports that stay active and Clear Dash HD will remain on. If MOTION setting is on, then

recording will only take place when motion is detected though Clear Dash HD stay on. In order to

turn off with active power ports, Clear Dash HD must be turned off by pressing ON/OFF button.

Clear Dash HD Modes – 4 Functions

With unit powered on, press MODE button to switch between functions.

Recording Video/DVR Turn on Clear Dash HD, unit will record. Press REC can start/stop

recording. When car stops and power is turned off, recording le is being saved automatic. Files will

be saved in time intervals set in MENU settings. Once memory card is full, les will be rewritten from

oldest one by one. Except the locked one.

Photo/Camera Turn on Clear Dash HD, press MODE button once to switch to Camera Mode.

Camera Icon will appear in upper left corner of screen. Press REC to take photo. Picture size can be

set by pressing menu and then REC button to select 3M, 2M, 1M, and VGA. Accept by pressing REC

and MENU to exit.

Record Audio Record audio les. Turn on Clear Dash HD, press MODE button two times to select

audio record picture. Audio microphone will appear in upper left corner of screen.

Press REC to start / stop recording, press up to pause / record.

Preview/Delete Files Turn on Clear Dash HD, press the MODE button three times to enter

preview play mode. Scroll UP or DOWN to select le to play. Press REC to start and stop. If le is

to be deleted / locked / slide show / voice memory , select and then press MENU button to enter

into delete / locked / slide show / voice memory mode.

CDHD-X1000_IB_TP_ENG_V1_170117.indd 9 2/3/17 4:53 PM

MENU SETTINGS-VIDEO DEFAULT OPTIONS

Movie Size 640 x 480 VGA 720 x 480 1280 x 720 1920 x 1080

Date Stamp Date & Time Date Only Off

Motion Detect Off On

Loop Record On Off

Loop Time 15 Min 10 Min 5 Min 3 Min 2 Min 1 Min

Video Sound Off On

Menu Settings: Video

Movie Size Video size resolution

Date Stamp Date and Time stamp

Motion Detection With motion detection

selected on, unit will automatically record

when there is movement in front of the unit.

Recording will stop when movement stops.

Loop Records Allows to set on or off loop

recording

Loop time Allows to set time of

Video Sound Allows sound to be on for

recording or off.

1. Turn on Clear Dash HD by holding ON/OFF

button down for 3 seconds.

2. Press MENU to enter video settings.

3. Scroll UP and DOWN to desired setting.

4. Press REC to select.

5. Press UP and DOWN to select desired setting.

6. Press REC to accept.

7. Press MENU / Off to Exit.

Menu Settings: Setup

Sounds Select sound and volume for function

conrmation.

Power Frequency Select 60hs or 50 Hz

Power Save Select time for unit auto off

Panel Protect Select time for screen auto off

Date & Time Set current date and time

Language Select Language

TV out Select TV system out

Format Format card option

IR LED Infrared LED on /off

Reset All

Version

CDHD-X1000_IB_TP_ENG_V1_170117.indd 10 2/3/17 4:53 PM

Table des matières

Manuels DVR populaires d'autres marques

FLIR

FLIR M3100E Series Manuel utilisateur

VTRACKPRO

VTRACKPRO FPRO300 Manuel utilisateur

Swann

Swann NVR-7085 models Manuel utilisateur

XtendLan

XtendLan DVR-1670C Manuel utilisateur

urmet domus

urmet domus 1093/004AHD Manuel utilisateur

Holux

Holux M1 Manuel utilisateur

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuel utilisateur

Whistler

Whistler D16VRS Manuel utilisateur

Defender Security

Defender Security 82-20235 Manuel utilisateur

MISUMI

MISUMI MP-WF100M Manuel utilisateur

Speco

Speco D8HU Manuel utilisateur

UST

UST DDR-E04AA Instructions d'utilisation

Consolidated

Consolidated Digital Video Recorder Manuel utilisateur

Mace

Mace DVR0404RW Guide de démarrage rapide

RCA

RCA RTD315W Manuel utilisateur

FSM

FSM Colibri Grande PRO Manuel utilisateur

Hauppauge

Hauppauge HD PVR 2 Manuel utilisateur

Identivision

Identivision ICR-PH161i PIONEER Manuel utilisateur