Clear-Com LQ series Manuel utilisateur

Page 1PN: 399G117 Rev D August 17th 2015

The following Quick Start Guide provides basic installation and configuration instructions for your LQ

system. LQ is a new IP interface for Clear-Com audio products. It offers Internet, LAN and WAN

connectivity for multi-linking audio.

•LQ-2W2 provides connection for two 2-wire analog partyline ports (XLR connectors)

•LQ-4W2 provides connection for two 4-wire ports (RJ45 etherCON connectors)

•LQ-R2W4 provides connection for four 2-wire ports (XLR) each with a male and a female

connector

•LQ-R4W8 provides connection for eight 4-wire ports (RJ45, etherCON)

•LQ-R2W4-4W4 provides connection for four 2-wire ports (XLR) and four 4-wire ports (RJ45,

etherCON).

Powering and connecting the LQ units

1) Connect the LQ unit to a network using standard Ethernet cable

and power it on (use either the DC power supply cable provided

or PoE). The 1 rack unit has redundant power supplies.

2) Connect the audio cables.

3) Open a Web browser on a device connected to the same

network as the LQ device.

4) Input the IP address shown on the LQ device’s display into the

address field of the browser.

5) Enter the default login credentials for the Core Configuration

Manager: Username – admin, Password – admin.

Core Configuration Manager (CCM)

The CCM has three main pages:

•Home - Settings for the host device (the device whose IP address

the browser is connected to).

•Overview - Settings for all devices in a Link-Group.

•Assignments – Configuration of audio and data routes between

LQ devices.

Note: If your network does not support

DHCP you must assign a static IP

address to the LQ device:

1) Connect a standard (straight)

Ethernet cable from a computer

to either LAN port on the

device.

2) Ensure the computer is in DHCP

mode.

3) Open a web browser and input

the device’s IP address in the

address field.

4) Navigate to the device’s

network screen within the

home page and allocate a static

IP address.

LQ™

LQ™ Series Quick Start Guide

All manuals and user guides at all-guides.com

Quick Start Guide |LQ™ Series

Page 2PN: 399G117 Rev D August 17th 2015

Linking the devices

Each device’s role is set as Link-Master by default.

1) Select one device in the group to be designated as the Link-Master, connect it to the network

and power it on.

2) Connect another LQ device to the same network and power it on.

3) Enter the IP address shown on the display of the Link-Member device into the address field of

your Web browser to connect to that device’s Core Configuration Manager.

Audio port settings

From the Core Configuration Manager (CCM) go to Overview > select device >A/B. The LQ devices

arrive with the following default settings:

Power

Disabled

Mode

Clear-Com

Input/Output

gain

0dB

Network Quality

High

VOX mode

Disabled

Termination

Disabled

Input/Output

gain

0dB

Network Quality

High

VOX mode

Disabled

Port Function

To Matrix

Baud rate

19200 (Eclipse)

Note: When

connecting any 2-

wire device to an

LQ Series port,

please auto-null

each port.

Connecting and configuring audio channels

Once an LQ device is connected to a Link-Master, click on the Assignments button within the

navigation bar to configure channel connections. See the LQ Series System User Guide on the Clear-

Com website for more information.

Navigate to Home

> Linking.

Click Change Role to

Link-Member.

Enter IP address of Link-Master.

Click on blue check mark or press

<ENTER> key to submit.

Select an available device ID

(highlighted in blue).

Click Apply changes.

Repeat linking process for each device.

All manuals and user guides at all-guides.com

Autres manuels pour LQ series

Autres manuels Clear-Com Système d'interphone

Clear-Com

Clear-Com Encore Manuel utilisateur

Clear-Com

Clear-Com HelixNet Partyline Manuel utilisateur

Clear-Com

Clear-Com ECLIPSE EASI-PICO MATRIX Manuel utilisateur

Clear-Com

Clear-Com HBP-2X Guide de démarrage rapide

Clear-Com

Clear-Com HME DX210 Manuel utilisateur

Clear-Com

Clear-Com TEMPEST 2400 Manuel utilisateur

Clear-Com

Clear-Com TEMPEST 2400 Manuel utilisateur

Clear-Com

Clear-Com HelixNet Partyline Manuel utilisateur

Clear-Com

Clear-Com SB-704 Manuel utilisateur

Clear-Com

Clear-Com HelixNet Comment utiliser

Clear-Com

Clear-Com TEMPEST 2400 Manuel utilisateur

Clear-Com

Clear-Com Tempest2400 Manuel utilisateur

Clear-Com

Clear-Com FreeSpeak II FSII-TCVR-24 Manuel utilisateur

Clear-Com

Clear-Com EclipseHX Manuel utilisateur

Clear-Com

Clear-Com ECLIPSE ICS 92/52 Manuel utilisateur

Clear-Com

Clear-Com RS-700 Series Manuel utilisateur

Clear-Com

Clear-Com Eclipse Median Manuel utilisateur

Clear-Com

Clear-Com DX410 Manuel utilisateur

Clear-Com

Clear-Com KB-111A Guide de dépannage

Clear-Com

Clear-Com FreeSpeak II Manuel utilisateur

Clear-Com

Clear-Com WBS Manuel utilisateur

Clear-Com

Clear-Com HME DX410 Manuel utilisateur

Clear-Com

Clear-Com ECLIPSE-32 MATRIX Manuel utilisateur

Clear-Com

Clear-Com MS-222 Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur