7.1 Getting an external IP address ............................................... 41
7.2 Port-forwarding .................................................................... 41
7.3 How to configure the Link-Master to be externally
reachable............................................................................. 42
7.4 How to configure Link-Members to be externally
reachable............................................................................. 43
8Link-local environments.................................................45
8.1 What is link-local?................................................................. 45
8.2 Accessing an LQ unit when in link-local mode ........................... 45
9Network configuration ...................................................46
9.1 Dynamic host configuration protocol (DHCP) configuration......... 46
9.2 Static configuration ............................................................... 46
9.3 Configuring an external IP address.......................................... 47
10 Interface port configuration...........................................48
10.1 Maximize bandwidth efficiency and audio quality ...................... 48
10.2 Call signaling and Remote Mic Kill (RMK) ................................. 48
10.3 2-wire port options ............................................................... 48
10.4 4-wire port options ............................................................... 50
11 Assignments ..................................................................52
11.1 Channels ............................................................................. 52
11.2 Audio configuration for a 4-wire direct/panel connection ............ 54
11.3 Modifying a channel/4-wire direct label.................................... 56
11.4 Example audio assignment via a Pico matrix ............................ 57
12 Using LQ™ to interconnect equipment............................58
12.1 Connecting 2-wire equipment................................................. 60
12.2 Connecting to 4-wire equipment ............................................. 61
12.3 Connecting an Eclipse Pico or MVX card to an Encore
device using LQ .................................................................... 62
12.4 Connecting an Eclipse Pico or MVX card to a panel using
LQ ...................................................................................... 63
13 Upgrading your device ................................................... 64
14 FAQs...............................................................................65
14.1 How can I find the IP address or name of my LQ unit?............... 65
14.2 What does a solid red light on the front panel keypad
indicate?.............................................................................. 65
