
Assistive Technology Resource Center Marlena Lanini
Colorado State University
January 2011
http://atrc.colostate.edu
3
4. Select a book to open from the file structure on the SD card. To navigate the folders, tap the
screen using the stylus or use the navigation buttons (right = open folder; left = close folder; up
and down to navigate up and down; enter = select)
5. To begin reading, press the play button or tap the play icon on the bottom of the screen.
File Types Supported:
The file structure on the SD card is automatically formatted. The ClassMate reader can support many
types of files. The following is a list the file names automatically setup on the SD card with a description
of the file types found in each folder. If you add files the SD card, save them in the following folders
according to file type.
•Audio Books: Single file books from audible.com. Each book may have sections.
•Digital Talking Books: Playing DAISY books with the ability to navigate, for example moving
within pages and chapters. Bookshare.org w/ unpack feature; RFB&D can be used, but need a
User Authorization Key (firmware upgrade to Classmate $20). DAISY 2.x, DAISY 3.0 (NISO
Z39.86), NIMAS
•Music files: Music files played by the ClassMate include mp3, Ogg Vorbis, wav and wma.
•Other Books: Other books are files such as MP3 or Wav books created with Optical Character
Recognition (OCR), Mass market MP3 audio books or podcasts from the internet (Non-DAISY or
non-NISO).
•Podcasts: Single file audio broadcasts (any supported audio file type). Podcast files do not
contain sections.
•Text files: Material that has been saved in html, rtf, txt and xml formats.
How to Transfer New Files onto the ClassMate Reader:
The ClassMate reader stores files on an SD card. Files can be added to the SD card from your PC using
the following steps:
1. Turn off the ClassMate Reader
2. Connect the ClassMate Reader’s SD card to your PC using one of the following methods:
a. Take the SD card out of the ClassMate Reader and put it in your PC’s SD card reader.
b. Connect the ClassMate Reader (with SD card installed) to the PC using the mini USB
cable. Once connected, power on the ClassMate Reader.
3. Open Explorer (or My Computer). Windows will recognize the ClassMate SD card as a USB
drive. Double-click on the drive to open and you will see the same file structure as you see on
your ClassMate Reader (described above).