Clarke IMAGE 26E Manuel utilisateur

Form No. 70216B 5/05 Clarke®Printed in the U.S.A.

READ THIS BOOK

This book has important information for the use and safe operation of this machine. Failure to read this

book prior to operating or attempting any service or maintenance procedure to your Clarke machine

couldresultininjurytoyouortootherpersonnel;damagetothemachineortootherpropertycouldoccur

as well. You must have training in the operation of this machine before using it. If you cannot read

English, have this manual explained fully before attempting to operate this machine.

Si Ud. o sus operadores no pueden leer el Inglés, se hagan explicar este manual completamente antes

de tratar el manejo o servicio de esta máquina.

All directions given in this book are as seen from the operator’s position at the rear of the machine.

For new books write to: Clarke®, 2100 Highway 265, Springdale, Arkansas 72764.

Operator's

Manual

IMAGE

26E

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Page -2- Clarke®Operator's Manual IMAGE 26E

CONTENTSOFTHISBOOK

OperatorSafetyInstructions .................................................................................. 3

IntroductionandMachineSpecifications..................................................................5

TransportingtheMachine ........................................................................................6

MachineControls ....................................................................................................7

Electrical Instructions 115V.....................................................................................10

HowtoPreparetheMachineforOperation ..............................................................11

MachineOperatingInstructions ...............................................................................12

MaintenanceInstructions ........................................................................................15

SECTIONII PARTS ANDSERVICE

How to Correct Problems in the Machine.................................................................20

FinalAssemblyDrawing..........................................................................................22

Final Assembly Parts List .......................................................................................23

RecoveryTankandHoseAssembly ........................................................................24

HandleAssembly ....................................................................................................25

RearPanelAssembly..............................................................................................26

SolutionTankAssembly..........................................................................................27

FrameAssembly.....................................................................................................28

FrameAssemblyPlumbingDetail ...........................................................................29

DriveAssembly .......................................................................................................30

Brush Assembly......................................................................................................31

RecoveryToolAssembly .........................................................................................32

AvailableAccessories .............................................................................................33

Electrical Schematic ...............................................................................................34

WiringDiagram .......................................................................................................35

FlowDiagram ..........................................................................................................36

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Clarke®Operator's Manual IMAGE 26E Page -3-

OPERATOR SAFETY INSTRUCTIONS

WARNING AVERTISSEMENT ADVERTENCIA

DANGER: Failure to read and observe all DANGER statements could result in

severe bodily injury or death. Read and observe all DANGER

statements found in your Owner's Manual and on your machine.

WARNING: Failure to read and observe all WARNING statements could result

in injury to you or to other personnel; property damage could

occur as well. Read and observe all WARNING statements found in

your Owner's Manual and on your machine.

CAUTION: Failure to read and observe all CAUTION statements could result in

damage to the machine or to other property. Read and observe all

CAUTION statements found in your Owner's Manual and on your

machine.

DANGER: Failureto readtheOwner'sManualpriortooperatingorattempting anyservice or

maintenance procedure to your Clarke machine could result in injury to you or to

other personnel; damage to the machine or to other property could occur as well.

You must have training in the operation of this machine before using it. If your

operator(s)cannotreadEnglish,havethismanualexplainedfullybeforeattempting

to operate this machine.

DANGER: Operating a machine that is not completely or fully assembled could result in injury

or property damage. Do not operate this machine until it is completely assembled.

Inspectthemachinecarefullybeforeoperation.

DANGER: Machinescancauseanexplosionwhenoperatednearflammablematerialsand

vapors. Do not use this machine with or near fuels, grain dust, solvents, thinners,

orotherflammablematerials.

DANGER: Using a machine with a damaged power cord could result in an electrocution. Do

not use the machine if the power cord is damaged. Do not use the electrical cord

tomovethemachine.

DANGER: Electrocution could occur if maintenance and repairs are performed on a unit that is

notproperlydisconnectedfrom the power source. Disconnectthepowersupply

beforeattemptinganymaintenanceorservice.

DANGER: Electrocution could occur if the machine is used on a power circuit that repeatedly

trips or is undersized. Have a licensed electrician check the fuse, circuit breaker

or power supply, and/or contact your local Clarke distributor for assistance.

WARNING: Operatingthismachine from anywhereotherthanfrom thebackofthe machine could

result in injury or damage. Operate this machine only from the rear.

WARNING: This machine is heavy. Get assistance before attempting to transport or move it. Use

two able persons to move the machine on a ramp or incline. Always move slowly. Do

not turn the machine on a ramp. Do not stop and leave the machine on a ramp or incline.

Readthe"ProceduresForTransporting"inthismanualbeforetransporting.

WARNING: Machinescantoppleoverif guided over theedgesofstairsorloading docks and cause

injury or damage. Stop and leave this machine only on a level surface. When you stop

the machine, put all switches into their "OFF" position.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Page -4- Clarke®Operator's Manual IMAGE 26E

WARNING: Thismachine isnot equippedwith aparking brake. Neverleavethemachineunattended.

Foraddedsafety,alwaysplaceachockinfrontofandbehindthedrivewheel.

WARNING: Maintenanceandrepairsperformedbyunauthorizedpersonnelcouldresultindamageor

injury. Maintenanceand repairsmustbeperformedbyauthorizedClarke personnelonly.

WARNING: Electrical components of this machine can "short-out" if exposed to water or moisture.

Keep the electrical components of the machine dry. Wipe the machine down after each

use. For storage, keep the machine in a dry building.

WARNING: Operatingamachinewithoutobservingalllabelsandinstructionalinformationcouldresult

in injury or damage. Read all machine labels before attempting to operate. Make sure all

of the labels and instructional information are attached or fastened to the machine. Get

replacementlabelsanddecalsfromyourClarkedistributor.

WARNING: Wet floor surfaces can be slippery. Water solutions or cleaning materials used with this

type of machine can leave wet areas on the floor surface. These areas can cause a

dangerousconditionfortheoperator or other persons. Always put "Caution"signs

around/neartheareayouarecleaning.

WARNING: Using water that is above 140°F can damage the machine. Do not use water where the

temperatureisabove140°F.

CAUTION: Use of this machine to move other objects or to climb on could result in injury or damage.

Do not use this machine as a step or furniture. Do not ride on this machine.

CAUTION: Yourmachine warrantywill bevoided ifanything otherthangenuineClarkepartsareused

on your machine. Always use Clarke parts for replacement.

CAUTION: Using a extension cord with your machine will result in a voltage drop and loss of power.

Do not use an extension cord.

CAUTION: Carpetdamagecanoccurifcarpethas not adequately dried before traffic resumes. Stay

off the carpet until it is dry.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Clarke®Operator's Manual IMAGE 26E Page -5-

Solution Pump 150 psi Adjustable By-pass

Solution Tank 25Gallon

Capacity

Recovery Tank 25Gallon

Capacity

Water Lift 136" Functional WL 95/CFM

Vacuum Tangentialdischarge,

Three stage motor

Electrical 115V, 60 Hz

OperatingAmps 12.0 Max.

Power Cable 75ft.3-WireGrounded

SprayJets QuickChangeNozzles

Brush Size 4" x 23"

Dimensions 44" x 26" x 36"

Weight 210 lbs.

Shipping Weight 280 lbs.

Dimensions 56" x 28" x 46" (41.7 cu. ft.)

INTRODUCTION AND MACHINE SPECIFICATIONS

TheIMAGE26E isaone-piece,self-propelledcarpetextractordesignedforcleaningcarpet. Themachineapplies

cleaning solution to the carpet and then rinses carpet and removes the dirty solution and soil with a recovery tool.

IMAGE 26E, 115V

Features:

Easy to Operate

Interex cleaning system.

Brushpressuregauge.

ImprovedLineofsight.

Adjustablebrushpressure.

Adjustabletraversespeed.

Quickchangebrushfeature.

Rugged10-gaugemainframe.

Large capacity, compact size.

Easy access for serviceability.

Largerecoverytankopeningforeasycleaning.

Smooth8",nonmarking,tread-lessdrivewheels.

Accessory tool connection.

Nofatigue,dead manswitchmounted oncontrolhandle.

75 ft, detachable, 12/3 power cord with twist lock connector.

Tangentialdischargevacmotor.

Circuitbreakerprotectionfortraverse,brush,andpumpmotors.

Automaticshut-off whenrecoverytankisfull.

Adjustablebypasspump.

Twobrushes:Maintenance(lessaggressive),Restoration(moreaggressive).

Solutionlevelindicator.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Page -6- Clarke®Operator's Manual IMAGE 26E

TRANSPORTING THE MACHINE

How to Put the Machine in a Van or Truck

WARNING: The machine is heavy. Make

sure you use two able persons

to help assist the machine up

the ramp.

1. Make sure the loading ramp is no less than eight

feetlongand strongenoughto supportthe

machine.

2. Make sure the ramp is clean and dry.

3. Secure the ramp in position.

4. Lift the recovery tool brush assembly into the

storageposition.

5. Align the machine on a level surface ten feet in

frontoftheramp.

6. Push the machine to the top of the ramp.

7. Tiedownthemachine.

How to Remove the Machine From A Van

Or Truck

1. Make sure there are no obstructions in the area.

2. Make sure the unloading ramp is no less than

eightfeetlong and strongenoughtosupport the

machine.

3. Make sure the ramp is clean and dry.

4. Secure the ramp in position.

5. Untiethe machine.

WARNING: The machine is heavy. Make

sure you use two able persons to

assist the machine down the

ramp.

6. Assisting the machine down the ramp, position

yourselftomaintainaslowdownwardspeed.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Clarke®Operator's Manual IMAGE 26E Page -7-

THE CONTROLS

The Power Switch (See figure 1, A)

The power switch is located on the control panel.

The power switch must be on before any

function of the machine will work.

The Traverse Knob (See figure 1, B)

Thetraverseknob is locatedonthecontrol paneljust

belowthepowerswitch. Thetraverseknobcontrolsthe

speedofthemachine. Forfasterspeeds,turntheknob

totheright. Forslowerspeeds,turntheknobtotheleft.

Variable Pump Pressure (See figure 2, C)

The variable pump pressure knob is located in the

middleofthecontrolpanel. Thisknobcanbeadjusted

clockwise to increase flow and pressure or counter-

clockwisetodecreaseflowandpressure. Ifstreaking

occursincreasepressuresetting.

WARNING: Do not operate the pump if the

solutiontankisempty. Damageto

the pump could occur.

The Vacuum Switch (See figure 3, D)

The vacuum switch is located on the control panel to

the left of the power switch.

Accessory Switch (See Figure 3, E)

The accessory switch is located to the left of the

power switch. This switch controls where the

solution is applied - floor or accessory connection.

Figure 1

Figure 2

Figure 3

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Page -8- Clarke®Operator's Manual IMAGE 26E

The Brush Adjustment Control Knob (See figure

4, A)

The brush adjustment control knob is located at the

rear of the machine. The knob is adjustable for many

types of carpet.

The Recovery Tool Handle (See figure 4, B)

The recovery tool handle is located on the back of

the machine. This handle lowers the recovery tool

andbrush.

Accessory Hose Connector (See figure 5, C)

The accessory hose connector is used to hook-up

optional auxiliary floor tools and to redirect the

solution flow. Use hose coupler (P.N. 30108A) to

connect accessory hose to recovery shoe hose.

(Seepage33.)

THE CONTROLS (cont.)

Figure 4

Figure 5

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Clarke®Operator's Manual IMAGE 26E Page -9-

The Traverse Switch (See figure 6, A)

Thetraverseswitchislocated on the control handle.

Lightpressurewiththethumbor hand activates the

traverseforforwardmovement. Onlyoneswitch

needstobeactivatedforunit to traverse. This

machinedoesnothavereverse.

Rinse Tank (See figure 7, A)

The rinse tank is top center of the machine. The rinse

tankfillopening is locatedunderthe front cover.

Rinse Tank Drain Hose and Solution Level

Indicator (See figure 7, B)

The rinse drain hose is on the lower left at the back of

the machine. To drain, pull the clear hose free of the

top hosebarb and lay the hose into drain. Reconnect

whenfinished.

*TIP: To drain, disconnect from top plug and insert

into vacuum hose up to the adaptor (E). Turn

vacuum on. Empty recovery tank.

Recovery Tank (See figure 7, C)

Therecoverytank ismountedinthe rearcenter

position on the machine.

Recovery Tank Drain Hose (See figure 7, D)

Therecoverydrainhose is located at thecenter

left at the back of the machine.

Chemical Tank (See figure 7, F)

The chemical tank is located on the rear right on the

back of the machine.

THE CONTROLS

Figure 6

Figure 7

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Page -10- Clarke®Operator's Manual IMAGE 26E

115VElectricalConnectionInstructions

DANGER: Electrocution and/or damage could

occur if this machine is plugged

into anything other than the cor-

rect frequency as specified on the

nameplate. This machine will

operate only on AC frequency and

on electrical voltage shown on the

nameplate. Make sure you have

the correct frequency and voltage

before connecting the power cord

to an outlet. The machine has a

plug as shown in figure 8.

This machine must be connected to an electrically

ground circuit in order to protect the operator from

electric shock. This machine has an approved power

cord with three conductors as well as a plug with three

terminals. Connecttheplugintoathreeholedreceptacle.

For maximum protection against electric shock, use a

circuitthatisprotectedbyagroundfaultcircuitinterrupter.

This machine uses a 115V AC 60 cycle electrical circuit.

Make sure you have the correct frequency and voltage

before connecting the power cord to an outlet. Do not

use an adaptor to plug in this machine. Contact an

electrical contractor and have a 3-prong receptacle

installed.

DANGER: Electrocution could occur if the

machine is exposed to water or

rain. Keep the machine in a dry

building.

DANGER: Electrocution could occur if ma-

chine is improperly connected to

the electrical system. To prevent

possible electric shock, always use

a 3-wire electrical system con-

nected to an electrical ground.

For maximum protection against

electrical shock, use a circuit that

is protected by a ground fault cir-

cuit interrupter. Consult your elec-

trical contractor.

DANGER: Electrocution could occur if the

ground pin is tampered with in any

way. Do not cut, remove, or break

the ground pin. Do not try to fit a

three-terminal plug into a recep-

tacle or connector body other than

a three plug receptacle or connec-

tor body. If the outlet does not fit

the plug, consult your electrical

contractor.

DANGER: Electrocution could occur if the

machine is used with a damaged

plug or power cord. If the cords or

plugs are worn or damaged in any

way, have them replaced by an

authorized service person or elec-

trician.

Figure 8

GroundPin

Outlet

must be

connected

to the

electrical

ground

Plate

Screw

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Table des matières

Autres manuels Clarke Machine de plancher

Clarke

Clarke IMAGE 16i Manuel utilisateur

Clarke

Clarke Focus II Rider Manuel utilisateur

Clarke

Clarke Encore S20 Manuel utilisateur

Clarke

Clarke C2K 13 Manuel utilisateur

Clarke

Clarke FOCUS II MICRO RIDER 26D Manuel utilisateur

Clarke

Clarke FM-1500 HD Manuel utilisateur

Clarke

Clarke Ultra Speed Burnisher Manuel utilisateur

Clarke

Clarke Fusion 20 Manuel utilisateur

Clarke

Clarke Vantage 17 cable Manuel utilisateur

Clarke

Clarke 3DS Manuel utilisateur

Clarke

Clarke C2K-16 Manuel utilisateur

Clarke

Clarke FM40 ST 56105618 Manuel utilisateur

Clarke

Clarke Vantage 14 Manuel utilisateur

Clarke

Clarke Encore L26 Cylindrical Manuel utilisateur

Clarke

Clarke JETSTAR 1700 Manuel utilisateur

Clarke

Clarke CA90 32T Manuel utilisateur

Clarke

Clarke TFC 400 Manuel utilisateur

Clarke

Clarke TFC 40056380773 Manuel utilisateur

Clarke

Clarke 7310000 Mode d’emploi

Clarke

Clarke EXT 311 Manuel utilisateur

Clarke

Clarke MA50 15B CLARKE380B Manuel utilisateur

Clarke

Clarke CR 28 Boost Manuel utilisateur

Clarke

Clarke FOCUS 00310S Manuel utilisateur

Clarke

Clarke BOS-18 Manuel utilisateur

Manuels Machine de plancher populaires d'autres marques

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Manuel utilisateur

Numatic

Numatic ET 4045 Manuel utilisateur

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Manuel utilisateur

Mytee

Mytee 8070 Mytee-Lite Manuel utilisateur

Kärcher

Kärcher B 140 R Manuel utilisateur

Triple S

Triple S Ace 26T1 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance SW 750 Manuel utilisateur

Tornado

Tornado Marathon 2000 98190 Manuel

Windsor

Windsor ADMIRAL Admiral 8 Manuel utilisateur

Numatic

Numatic TTB 1117/100 Manuel utilisateur

Tennant

Tennant 8210D Manuel utilisateur

Nobles

Nobles Frontier Manuel du produit

lavina

lavina 21-X Manuel utilisateur

KENT

KENT Edge 28B Manuel utilisateur

Tennant

Tennant 215 Manuel du produit

Windsor

Windsor BDP 51/2000C Manuel utilisateur

CleanFreak

CleanFreak DURA-18HD Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Guide de l'administrateur