Clarion HEML-0034K3 Manuel utilisateur
QUICKSTART
GUIDE
Optical HDMI Extender
(Multi-Mode)
Installation Guide
Product Name: Optical HDMI Extender
Manufacturer : Optowell Co., Ltd.
Part No. : HEML-0034K3
LotNo.:
MSIP-REM-Opw-HEML-0034K3
QUICKSTART
GUIDE
Optical HDMI Extender
(Multi-Mode)
Installation Guide
Packing List
Additional Packing List
Optical HDMI Transmitter
Optical HDMI Receiver
- 5V PowerAdaptor(2pcs)
Features
• High Speed and long distance transmission by single LC type Multi-mode Fiber
• Extends up to 300m by Multi-mode fiber(OM3)
• TMDS video signals and EDIDdata are transmitted by optical fiber
• HDMI Specification 1.4 Compliant
• Supports HDCP Compliant Device
• Supports resolution up to 4K (3840 × 2160) at 30Hz
(4 : 4 : 4), 4K (3840x2160)@60Hz(4 : 2: 0)
• Compactdesign comparable with electrical standard HDMI
Parameter Symbol
Transmitter Receiver
Optical Converter 850nm FP-LD/
InGaAs PIN PD
980nm FP-LD/
GaAs PIN PD
Input and Output Signal TMDS Signal
(HDMI 1.4 standard)
TMDS Signal
(HDMI 1.4 standard)
Video Bandwidth 3.5Gbps / Channel
Module Dimension 73.48 x 40.2 x 15.9 mm ( L x W x H)
Module Weight 58 g
Used electrical
Connector HDMI type A (Female) HDMI type A (Female)
Optical Connector 1 LC Connector 1 LC Connector
Recommended Fiber Multi-mode glass-fiber
Maximum Supported
Resolution
4K (3840 × 2160)@30Hz (4:4:4),
4K (3840 x 2160)@60Hz (4:2:0)
Connection
• Caution
✓Use the DC adapter (5V) included in the product package for the
transmitter and Receiver.
✓Connect Multi-mode Fiber-Optic cable in order to transmit the signal till
300meters distance.
✓With using poor quality HDMI cable , the product does not work or you
may have difficulty in 4K video transmission. We recommend the HDMI
cable that supports 4K (Above 1.4 version)
Multi-mode Fiber, 300m(OM3)
Connection
Troubleshooting
• ConnectHDMI cable to transmitter and receiver
• Connectpoweradaptor to the transmitter and receiver
• Connect Multi-mode LC type 1 channel standard fiber-optic cable
between transmitter and receiver
• ConnectHDMI cable connected to transmitter to source
(Source : Video Player using HDMI such as PC,
DVD player, PS4 and Xbox)
• ConnectHDMI cable connected to receiver to digital display
(Display : Video display device using HDMI such as monitor and TV)
• The blue LED will appear on the transmitter and receiver after all the
productconnections are completed.
-
Red LEDOn: Power supply.
-
Blue LED On: Signal Transfer.
-
Red Led On and Blue LEDBlinking: Only power supply, signal not transfer.
(Connections are notcompleted or there is problem with compatibility)
If the malfunction is not fixed by the above measures, please contact the A/S center.
Screen is not
displayed.
- Check if the source device power is on.
- Check if connections to the source and display
device are correct.
- Turn the source device power off and on again.
- Check if connection to DC adapter is correct.
Noise is shown
on the screen. - Check the HDMI connection.
- Check the display resolution.
Precautions for Safety
Warnings
Make sure to comply with precautions to prevent danger and damage on
the property through proper usage product.
This symbol is intended to alert you that uninsulated voltage
Within this product may have sufficient magnitude to cause
Electric shock. Therefore, it is dangerous to make any kind of
Contact with any inside part of this product.
This symbol is intended to alert you of the presence of
important operating and maintenance (servicing) Instructions
in the literature accompanying this product.
1. Do not plug in several power cords. It can cause overheating and a fire.
2. Do not bend the power cord by force, or do not put heavy object on the
power cord to prevent breakdown. It can cause a Fire.
3. Do not touch the power plug with wet hands. You may be struck by
electricity.
4. Insert the power plug firmly to avoid shanking. If not inserted firmly, it
can cause a fire.
5. Do not disassemble, repair and modify. It can cause a fire and an injury
by electrical shock due to abnormal operation.
6. Do not insert a metallic material (ex. hair pin or ironware) or combustible
foreign object (ex. Match, paper and so on) into the terminal hole, or
drop the terminal. It may cause a fire and an injury by electrical shock.
7. Do not put vase, flowerpot, cup, cosmetics, medicines and container
filled with water near the product. It may cause a fire and an injury by
electrical shock, or injury by dropping.
8. Stay away from the direct sunlight and the heat source like a heater. It
may cause a fire.
9. Do not spray water on the product. It may cause a fire and an injury by
electrical shock. Scrub the product surface softly with a dry towel.
10. Use the DC power adapter with correct specification. It may cause a fire.
11. This device is Class I that is safe for eyes but do not see the laser through
the optic device such as Microscope, Magnifying glass and so on.
Cautions
1. Do not put the heavy object on top of the product. It may cause
malfunction.
2.
Put the product in the flat and stable location. If the product falls down or
dropped, it may cause an injury and malfunction.
3. Stay away from the place with too high temperature (over 50
℃
) and too
low temperature (under 0
℃
), or the high humidity.
4. It may cause a fire and an injury by electrical shock.
5. Do not twist or pull by force the both ends of the optical cable. It can
cause malfunction.
(Minimum bending diameter: 75mm)
Warranty
One (1) year limited warranty
Our customers have right to be served with free charge when
There is
trouble in this product during one (1) year from the day
Purchased.
Table des matières
Autres manuels Clarion Extenseur
