Clare Controls HDBaseT-C.tx70 Manuel utilisateur
HDBaseT Compact Extender
Set 70m User Guide
Model HDBaseT-C.tx70 and HDBaseT-C.rx70
Doc ID 2015-07-918 • Rev 03
Copyright
© 07JUL15 Clare Controls, Inc. All rights reserved.
This document may not be copied in whole or in part or
otherwise reproduced without prior written consent from Clare
Controls, Inc., except where specifically permitted under US
and international copyright law.
Trademarks and patents
HDBaseT Compact Extender Set 70m, Model HDBaseT-C.tx70
and HDBaseT-C.rx70 name is a trademark of Clare Controls,
Inc.
Other trade names used in this document may be trademarks
or registered trademarks of the manufacturers or vendors of
the respective products.
Manufacturer
Clare Controls, Inc.
7519 Pennsylvania Ave., Suite 104, Sarasota, FL 34243, USA
Version
This document applies to HDBaseT Compact Extender Set
70m, Model HDBaseT-C.tx70 and HDBaseT-C.rx70.
Contact information
For contact information, see www.clarecontrols.com.
FCC compliance
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
FCC compliance
Class A: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his or her
own expense.
FCC compliance
Class B: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
EU compliance
Complete additional sections according to the governing laws
and standards for the intended marketplace.
EU directives
1999/5/EC (R&TTE directive): Hereby, Clare Controls, Inc.
declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
2002/96/EC (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a
battery that cannot be disposed of as unsorted municipal waste
in the European Union. See the product documentation for
specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the
battery to your supplier or to a designated collection point. For
more information see: www.recyclethis.info.
HDBaseT Compact Extender Set 70m User Guide i
Content
Safety precautions...ii
Limitation of liability...iii
Introduction...1
Features...1
Package contents...1
Product appearance...2
System connection...3
Usage precautions...3
Application examples...3
Connection procedure...4
Application...5
Twisted pair cable connection...5
Specifications...6
Supported resolution...7
Panel drawings...8
Troubleshooting and maintenance...9
Safety operation...10
After-sales service...11
ii HDBaseT Compact Extender Set 70m User Guide
Safety precautions
Read all instructions carefully before using the device. Save this
manual for future reference.
Unpack the equipment carefully. Save the original box and
packing material for future shipping.
Follow basic safety precautions to reduce the risk of fire, electrical
shock, and injury to persons.
Do not open or modify the device; it may result in electrical shock
or burn.
Only use parts that meet the device’s specifications. If you use
parts that do not match, it may cause damage to the device.
Only qualified professionals should service this product.
Do not expose this device to rain, moisture, or any form of liquid
to avoid fire or shock damage. If exposure occurs, unplug the
device immediately.
Do not use liquid or aerosol cleaners on this unit. Always unplug
the power to the device before cleaning.
Do not disrupt the cables or power source of the device.
Install the device in a ventilated area to avoid overheating.
Do not twist or use force to pull the optical cable, this can cause
damage or malfunction in the device. .
Do not leave this device plugged in unused for long periods.
Do not burn or mix this device with general household waste.
Treat the device as electrical waste
Caution: The HDBaseT-C.tx70 and HDBaseT-C.rx70 must be used as
a pair. Do not use the HDBaseT-C.rx70 separately or in combination
with HDBaseT switches, as using it may cause damage to the unit.
HDBaseT Compact Extender Set 70m User Guide iii
Limitation of liability
To the maximum extent permitted by applicable law, in no event will Clare
Controls, Inc. be liable for any lost profits or business opportunities, loss of use,
business interruption, loss of data, or any other indirect, special, incidental, or
consequential damages under any theory of liability, whether based in contract,
tort, negligence, product liability, or otherwise. Because some jurisdictions do
not allow the exclusion or limitation of liability for consequential or incidental
damages the preceding limitation may not apply to you. In any event the total
liability of Clare Controls, Inc. shall not exceed the purchase price of the
product. The foregoing limitation will apply to the maximum extent permitted by
applicable law, regardless of whether Clare Controls, Inc. has been advised of
the possibility of such damages and regardless of whether any remedy fails of
its essential purpose.
Installation in accordance with this manual, applicable codes, and the
instructions of the authority having jurisdiction is mandatory.
While every precaution has been taken during the preparation of this manual to
ensure the accuracy of its contents, Clare Controls, Inc. assumes no
responsibility for errors or omissions.
iv HDBaseT Compact Extender Set 70m User Guide
HDBaseT Compact Extender Set 70m User Guide 1
Introduction
The extender set consists of a transmitter and receiver pair. HDMI signals are input into
the transmitter and HDBaseT technology is used to transmit the signals to the receiver
up to 230 ft. (70 m) via a Cat5e/Cat6 cable. The receiver then outputs the HDMI signal.
Bi-directional IR is also transmitted across the Cat5e/Cat6 cable. The extender set
supports CEC, and IR control, and PoH (Power Over HDBaseT), which can be used to
power the receiver via the Cat5e/Cat6 cable. This eliminates the need for power at the
receiver end.
Features
Supports full HD: Delivers high-resolution images (1080p at 60 Hz, 3D,
4K × 2K at 30 Hz)
Maximum transmission distance is 230 ft. (70 m) over single a CAT5e/CAT6 cable,
or 40 meters for 4Kx2K at 30 Hz
High bandwidth: 10.2 Gbps
HDTV compatible: Uses HDMI 1.4 and is HDCP-2.2 compliant
Support PoH (Power Over HDBaseT) and CEC
Uses HDBaseT technology for extended capability and reliability
Bi-directional IR.
LED indicators show working status to aid in troubleshooting
Wall or table mount steel enclosure
Package contents
4 x detachable mounting brackets
8 x plastic cushions
4 x screws
1 x power supply (12 VDC)
4 x power plug adapters
1 x user manual
1 x IR emitter
1 x IR receiver
1 x IR adapter cable
Notes: Ensure all the accessories are included. If not, contact your dealer.
2 HDBaseT Compact Extender Set 70m User Guide
Product appearance
Figure 1: The HDBaseT-C.tx70 transmitter
(1) HDMI IN:
Connect to the HDMI source device.
(2) IR IN:
Connects to an IR receiver. The IR signal received from this port will be
transmitted via HDBaseT to the transmitter unit for use at the source
location.
Note: When using a control system, such as Clare Controls, the adapter
cable (included) must be used. The male mono end connects to the
control system; the male stereo end connects to the HDBaseT-C.tx70.
(3) IR OUT:
IR signals received by receiver and sent via HDBaseT to the transmitter
are available for emitter use from this port.
(4) Power LED:
Illuminates when the device is receiving power.
(5) DC 12V:
Connects to the power supply
(6) HDBT OUT:
Connects via a single Cat5e/Cat6 cable to the HDBaseT port on the
receiver.
Figure 2: The HDBaseT-C.rx70 receiver
(1) HDMI OUT:
Connect to the HDMI display device.
(2) IR IN:
Connects to an IR receiver. The IR signal received from this port is
transmitted via HDBaseT to the HDBaseT-C.tx70 unit for use at the
source location.
(3) IR OUT:
IR signals received by the HDBaseT-C.tx70 and sent via HDBaseT to
the HDBaseT-C.rx70 are available for emitter use from this port.
(4) Power LED:
Illuminates when the device is receiving power.
(1) (2) (3) (4) (5) (6)
(1) (2) (3) (4) (5)
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Clare Controls Extenseur
