[SM-295301-A]
―1―
Ｆｏｒ
ＦｏｒＦｏｒ
Ｆｏｒ
Ｓａｆｅｔｙ
ＳａｆｅｔｙＳａｆｅｔｙ
Ｓａｆｅｔｙ
Ｕｓｅ
ＵｓｅＵｓｅ
Ｕｓｅ
To use this product safety, basic knowledge of pneumatic equipment,
including materials, piping, electrical system and mechanism is
required (to the level pursuant to JIS 8370 Pneumatic System
Rules).
We do not bear any responsibility for accidents caused by any
person without such knowledge or arising from improper operation.
Our customers use this product for a very wide range of
applications, and we cannot keep track of all of them. Depending on
operating conditions, the product may fail to operate to maximum
performance, or cause an accident. Thus, before placing an order,
examine whether the product meets your application, requirements,
and how to use it.
This product incorporates many functions and mechanisms to
ensure safety. However, improper operation could result in an
accident. To prevent such accidents, read this operation manual
carefully for proper operation.
Observe the cautions on handling described in this manual, as well
as the following instructions:
PRECAUTIONS
PRECAUTIONSPRECAUTIONS
PRECAUTIONS
Incorrect address settings of serial transmission slave stations could
cause the solenoid valve and the cylinder to malfunction.
For operation if serial transmission slave stations, read the
communication system operation manual carefully.
Do not touch electric-wiring connections (exposed live parts): this
will cause an electric shock. During wiring, keep the power off. Also,
do not touch these live parts with wet hands.
This product does not meet the surge immunity requirements specified
in EN61000-4-5 for CE marking. Please provide appropriate protective
measures against lightning surges on the device side.
When the valve power is turned on (i.e., at power-up),the valve lamp
may light up momentarily. However, the valve itself is not turned on
or off as a result of this.
！
