CityGrow CG102RV3 Manuel utilisateur
CG102RV3
ZIGBEE REMOTE CONTROL
USER MANUAL
VERSION 0.0
17 APRIL 2015
Disclaimers and Copyright
Nothing contained in this publication is to be construed as granting any right, by implication or otherwise, for the
manufacture, sale, or use in connection with any method, apparatus, or product covered by letters patent, or as insuring
anyone against liability for infringement of letters patent.
Efforts have been made to ensure the accuracy and reliability of the data contained in this publication; however, Citygrow
Energy Systems Limited. makes no representation, warranty, or guarantee in connection with this publication and hereby
expressly disclaims any liability or responsibility for loss or damage resulting from its use or from the use of any product
or methodology described herein; for any violation of any federal, state, or municipal regulation with which this
publication may conflict; or for the infringement of any patent from the use of this publication. Nothing contained in this
publication should be viewed as an endorsement by Citygrow Energy Systems Limited of any particular manufacturer’s
products.
Copyright © 2012 Citygrow Energy Systems Limited, All Rights Reserved
CG102RV3
ZigBee Remote Control
Rechargeable
Lithium Battery
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE
PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards.
There are, however, some installation and operation precautions which you should be particularly aware of.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Table of Content
1. Introduction...................................................................................................... 1
2. Understanding of the product-CG102RV3 ............................................................ 2
3. Getting start ..................................................................................................... 3
4. Operation instruction......................................................................................... 4
6. Specification ..................................................................................................... 6
1
1. Introduction
Thank you for buying Citygrow’s product. CG102RV3 runs on internal rechargeable
lithium battery pack. The fully recharge time is typically 2 hours by using mini USB cable.
It is a powerful and handy device that enable you to control your house, eg. Lighting
control, curtain control, air-conditioner control, IR device control.
Before you use CG102RV3, you should have already installed various kind of Citygrow’s
ZigBee/IR control product. You may locate CG102RV3 at different locations within your
house for example, living room, dining room, bedside, ………..etc. depending on your
usage requirement.
This product is simple to use, 12 scenes control button that you can pre-program it
through Citygrow’s HomeNET Planner software that you can download from
www.citygrowsys.com.
Description
ZigBee wireless remote control.
Based on IEEE 802.15.4.
2.4GHz radio frequency.
Remote control of Citygrow’s switches, dimmers, AC sockets, IR, ….etc.
Scene will include lighting, curtain open/close, AC socket on/off, IR TV, Air-
conditioner control…etc.
Total 12 powerful user customized scene settings.
All on, All off, Goodbye, Good night, Eco, Day mood, Night mood ….etc.
Keychain size.
Built-in rechargeable lithium battery.
Rubber keypad.
Handy design.
Support multiple remotes to be used within same wireless network.
128bits AES encryption transmission that is high speed and secure.
2
2. Understanding of the product-CG102RV3
USB cover
Plug in the provided USB cable CG101UTU
1. For battery recharge
2. For programming
Total 12 control
buttons
3
3. Getting start
3.1. Make sure that you have already installed Citygrow’s ZigBee products in your
house. (refer to the user manual of each Citygrow’s product)
3.2. Make sure that you have already preprogrammed Citygrow’s ZigBee products
in your house (refer to the user manual of each Citygrow’s product)
3.3. Make sure that you have already preprogrammed the scenes on each of your
existing “Citygrow’s Mood control panel”, for example CG100H4-MD, CG800H4-
MD…………….etc.
3.4. Use the provided Mini USB cable CG101UTU to plug into DC5V, (100mA
minimum) USB port of your PC or mobile phone charger to recharge
CG102RV3 for 2 hours.
3.5. Adding CG102RV3 to your home wireless network, please get ready the
following items before start:
a. CG101UTU mini USB cable ( provided)
b. CG101UTC USB to Com cable ( purchase separately)
c. A window 7 / XP pc installed with Citygrow’s HomeNET Planner software.
d. The original XML file of your house that you have used for section 3.1 to 3.3.
3.6. Connect the cables according to the following diagram.
.
3.7. Refer to HomeNET planner manual for detail settings for the CG102RV3.
CG101UTU
Mini USB cable
CG101UTC
USB to Com cable
PC installed with
HomeNET planner
software
CG102RV3
4
4. Operation instruction
4.1. Press the Control button once to select the “lighting scene” that you have
preset.
4.2. After pressing the button, CG102RV3 will send radio signal to the surrounding
Citygrow’s wireless product, for example the wall mount type mood control
panels, switch module, dimmer, curtain motor driver, AC power socket……..etc
4.3. Then CG102RV3 will go back to sleep condition immediately to save the
battery power.
4.4. In case you found there is no action after you have pressed the button, the
internal lithium battery will need to be recharged.
Control buttons total
12 pcs
USB cover
5
5. Battery recharge
5.1. Open the USB cover at the front of the product.
5.2. Use the provided USB cable to plug into the USB port at the USB cover area.
5.3. The other side of the USB cable should be plugged into DC5V ( minimum 0.1A)
type USB charger, for example the mobile phone USB charger or USB port of a
computer.
5.4. The fully recharge time is about 2 hours.
5.5. After 2 hours recharge process, you should unplug the USB cable and try to
push the button to test again.
6
6. Specification
Autres manuels pour CG102RV3
1
Table des matières
Autres manuels CityGrow Télécommande
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
