Citizen PHU Series s Manuel utilisateur
PRINTER PRESENTER UNIT
MODEL PRU·PMU·PHU Series
Rev.1.0 First created Oct. 14, 1999
Rev.1.1 Revised Jan. 25, 2000
Specifications
i
REVISION
Rev.No. Date Content
Rev. 1.0 Oct. 14, 1999 First created
Rev. 1.1 Jan. 25, 2000 Revised
1. These specifications only apply to this product.
2. The contents of these specifications are subject to change without prior notice. Always consult the latest
revision of the specifications.
3. Transcription, duplication, or modification of any content of these specifications is prohibited without
written permission from Japan CBM Corporation.
NOTE
ii
THETABLE OF CONTENTS
1. GENERAL OUTLINE .......................................................................... 1
1.1 Features ....................................................................................................................1
1.2 Uses.......................................................................................................................... 1
2. BASIC SPECIFICATIONS .................................................................. 3
2.1 Classification of Equipment..................................................................................... 3
2.1.1 PRU Series (Presenter Unit)............................................................................ 3
2.1.2 PMU Series (Printer Mechanism Unit) ........................................................... 3
2.1.3 PHU Series (Paper Holding Unit) ................................................................... 3
2.2 Specifications Lists .................................................................................................. 4
2.2.1 PRU Series (Presenter Unit)............................................................................ 4
2.2.2 PMU Series (Printer Mechanism Unit) ........................................................... 7
2.2.3 PHU Series (Paper Holding Unit) ................................................................... 7
2.3 Designing PRU and PMU Unit Installation ............................................................. 8
3. CONNECTION TERMINALS........................................................... 10
3.1 Connection Terminals ............................................................................................ 10
3.1.1 Presenter’s Connection Terminals ................................................................. 10
3.1.2 Auto-Cutter’s Connection Terminals............................................................. 11
3.2 PMU Connection Terminals .................................................................................. 12
4. FLOW CHART ........................................................................... 15
4.1 PRU Unit Initialization at Power On ..................................................................... 15
4.2 Printing (Issuing Receipts)..................................................................................... 17
4.3 Outputting Printed Paper ....................................................................................... 18
5. TIMING CHART ........................................................................ 19
5.1 PRU Timing Chart ................................................................................................. 19
5.2 PPU Timing Chart (Controlled by paper sensor)................................................... 20
6. DESIGN CONSIDERATIONS .................................................... 21
iii
7. OPERATION ....................................................................................... 22
7.1 PRU (Presenter Unit) ............................................................................................. 22
7.1.1 Clearing Jams in the Presenter ...................................................................... 22
7.1.2 Releasing a Locked Cutter ............................................................................ 23
7.2 PMU (Printer Mechanism Unit) ............................................................................ 24
7.2.1 Loading Printing Paper ................................................................................. 24
7.2.2 Removing Residual Paper ............................................................................. 26
7.2.3 Clearing Paper Jams...................................................................................... 27
7.3 PHU (Paper Holding Unit) .................................................................................... 28
7.3.1 Loading a Paper Roll..................................................................................... 28
7.3.2 Paper-Near-End Sensor Function .................................................................. 29
8. OUTLINE DRAWINGS...................................................................... 30
8.1 Outline Drawing for PRU-130 ............................................................................... 30
8.2 Outline Drawing for PMU-231.............................................................................. 31
8.3 Outline Drawing for PHU-131/132 ....................................................................... 32
PRU·PMU·PHU SERIES SPECIFICATIONS
1
1. GENERAL OUTLINE
The PRU-130 is a presenter unit (automatic paper feed output unit) equipped with an auto-cutter
mechanism. When used in conjunction with various types of printer, the PRU-130 can help to
prevent paper misfeeds, paper jams, and troubles associated with issuing coupons and receipts.
The PMU-231 is a mechanical printer unit exclusively designed for the PRU-130.
The PHU-131 / 132 is a paper holder that can accommodate a large-diameter paper roll.
1.1 Features
<PRU-130>
•Compact and lightweight.
•High reliability realized at a low cost, based on a simple mechanism.
•Up to 170 mm (or 6.7 inches) long receipts can be issued. (Receipts longer than 170 mm are
pushed out of the paper output slot as printing proceeds.)
•Equipped with a thin-type, high-reliability auto-cutter.
<PMU-231>
•High speed with low noise, based on line thermal printing technology.
•Long-life head adopted, and high reliability attained with a simple mechanism.
<PHU-131 / 132>
•Capable of holding a large-diameter paper roll (ø 203 mm max.).
•Near-paper-end sensor adjustable.
•Capable of 2-level detection of near-paper-end conditions. (PHU-132)
1.2 Uses
• Issuing a variety of tickets and coupons (game machines and amusement equipment).
• Unattended ticket issuing systems
• Outdoor information terminals (KIOSK)
• ATM bank terminals
PRU·PMU·PHU SERIES SPECIFICATIONS
2
CAUTION:
•Install this equipment to machines which are placed horizontally and securely.
•Do not install the equipment near a heater, radiator, or in direct sunlight.
•Avoid using the equipment in a high-temperature, high-humidity, or dirty environment.
•Avoid condensation occurring on or inside the equipment. If condensation should occur, never turn on
the equipment until the condensation disappears completely.
•Be sure to keep this User’s Manual with care for future reference.
PRU·PMU·PHU SERIES SPECIFICATIONS
3
2. BASIC SPECIFICATIONS
2.1 Classification of Equipment
2.1.1 PRU Series (Presenter Unit)
PRU-130
<Composition>
•Paper transport section
•Auto-cutter
•Paper sensor
•Attaching bracket
2.1.2 PMU Series (Printer Mechanism Unit)
PMU-231
<Composition>
•Printer mechanism
•Paper guide
•Attaching bracket
2.1.3 PHU Series (Paper Holding Unit)
PHU-13 1
PNE sensor
1 : 1 piece
2 : 2 pieces
PRU·PMU·PHU SERIES SPECIFICATIONS
4
2.2 Specifications Lists
2.2.1 PRU Series (Presenter Unit)
(1) General Specifications
Item Content
Used Paper Type : Thermal paper
Paper width : 58 to 82.5 mm
Paper thickness : 60 to 85 µm
Presenter
Standard issue length : 64 to 170 mm (2.5 to 6.7 inches)
When used in combination with the PMU-231
∗Refer to “2.3 Designing PRU and PMU Unit Installation’’
Issue speed : Approx. 350 mm/sec
Auto-cutter Cutting method : V-shaped blade, slide-type full cutting
(ACS-230F) Allowable cutting frequency : 20 cuts/min
Drive voltage DC 24 V ±10% (Motor)
DC 5 V ±5% (Sensor related)
Reliability Presenter life: 30 km or over
Auto cutter life : 500,000 cuts or over
Use environment Operation : 5 to 40 C°; 35 to 85 % RH (no condensation)
Storage : – 20 to 60 C°; 10 to 90 % RH (no condensation)
External dimensions
Refer to “8.1 Outline Drawing for PRU-130”.
Weight 0.5 kg
(2) Paper issue length
64 to 170 mm (2.5 to 6.7 inches)
•When used in combination with the printer mechanism unit PMU-231.
•The length of paper longer than 170 mm is pushed out of the paper output slot.
•Refer to “2.3 Designing PRU and PMU Unit Installation” and “4. FLOW CHART” and
“5. TIMING CHART”.
(3) Motor
When voltage is applied to the motor, the paper is transported. Referring to “4. FLOW CHART”
and “5. TIMING CHART”, perform motor control.
Type : DC brush motor
Drive voltage : DC 24 V ±10 %
Current : Max. starting current : 140 mA (DC 24 V, 25 C°)
Ave. starting current : 60 mA (DC 24 V, 25 C°)
PRU·PMU·PHU SERIES SPECIFICATIONS
5
Item Symbol Rated value
Forward current IF50 mA
Input Reverse current VR6 V
Allowable loss P 75 mW
Collector-emitter voltage VCEO 35 V
Output Emitter-collector voltage VECO 6 V
Collector current IC20 mA
Collector loss PC75 mW
Total allowable loss Ptot 100 mA
Operating temperature Topr – 20 to +85 C°
Storage temperature Tstg – 40 to +100 C°
Soldering temperature (within 5 sec) Tsol 260 C°
• Recommended circuit diagram
(4) Paper sensor
• Type : Reflective-type photo-interrupter
• Product No. : GP2S24 (SHARP)
• Absolute max. rating : (25 C°)
* For pin numbers, refer to “ 3. 1 Connection Terminals”.
CPU M
1KΩ
Vdd (+24 V)
4+24V
5
GND
2SC4671
* 2SC4671 is a Darlington transistor with a built-in Zener diode.
PRU·PMU·PHU SERIES SPECIFICATIONS
6
Item Symbol Condition Min. Standard Max. Unit
value value value
Input Forward voltage VFIF=20 mA 1.2 1.4 V
Reverse current IRVR=6 V 10 µA
Output Dark current ICEO VCE=20 V 10–9 10–7 A
Photocurrent IC
I
F
=4 mA, V
CE
=2 V
20 45 120 µA
Transfer
Response Upper limit tr
V
CE
=2 V, I
C
=100 µA
20 100 µs
charac-
time Lower limit tf
R
L
=1 kΩ, d=1 mm
20 100 µs
teristics
Leakage current ILEAK
I
F
=4 mA, V
CE
=2 V
0.1 µA
• Photoelectric characteristics
• Recommended circuit diagram
* For pin numbers, refer to “ 3. 1 Connection Terminals”.
CPU
100Ω
180Ω
33KΩ
0.01µF
33KΩ
3.3KΩ
VddVddVdd
1
2
3
Paper sensor
(Photo-interrupter)
Anode
Collector
Cathode
User side Presenter side
GND GND GND GND
(5) Auto Cutter
For recommend circuit and seguence diagrams, refer to the separate “ACS 230 Specifications”.
Ce manuel convient aux modèles suivants
6
Table des matières
Autres manuels Citizen Accessoires pour imprimantes
Citizen
Citizen PPU PPU-700 Manuel utilisateur
Citizen
Citizen BD2-2860 Manuel utilisateur
Citizen
Citizen AW-3 Manuel utilisateur
Citizen
Citizen PPU-700 Manuel d'utilisation
Citizen
Citizen CBM-202PC-04 Manuel utilisateur
Citizen
Citizen PMU2300III Manuel utilisateur
Citizen
Citizen PPU-700 Manuel utilisateur
Citizen
Citizen DP-505 Manuel utilisateur
Citizen
Citizen BD2-2220 Manuel utilisateur
Citizen
Citizen CBM-202PC Series Manuel utilisateur
