M2008HF/HFD, M2616/A2008, M3110, M3310, M3820, M3902, M3903 and M3904
CITELlink Phone Quick Reference
What’s Different
• Some M2008 and M2616/A2008 phones do not have a display. On these phones with no display, the
SUPERKEY features are available, but cannot be verified - check the button presses carefully or use a
display phone for set up. The SUPERKEY is not available on the M3110.
• Press SUPERKEY to access a menu that allows you to program speedcalls, personal keys, and to turn on
and turn off features.Press the Yes and No softkeys to navigate through the SUPERKEY menu. For phones
without softkeys, use ∗(Yes) and #(No) on the dial pad.
• During a handsfree call if the Microphone indicator is on, the Microphone is on. If the indicator is off, the
Microphone is muted. Press the Microphone key to turn the microphone on and off.
• When you have a MESSAGE waiting, the red indicator lights up.
Using Your Phone
Hold Press HOLD to place call on hold
To retrieve the call, press the flashing line key
Transfer 1.While on a call, press TRANS/CONF.
2.Dial the number of a third party.
3.Do one of the following:
• Hang up.
• Wait for an answer, announce the transfer, and
hang up.
Conference 1.While on a call, press TRANS/CONF.
2.Dial number of next party.
3.Wait for answer.
4.Press TRANS/CONF.
Redial last number that you dialed To save: lift the handset and enter the Save Last Num-
ber feature access code
To dial: lift the handset enter the Redial Last Number
feature access code
Set call forwarding 1.Press SUPERKEY.
2.Press No until "Call Forwarding?" appears.
3.Press Yes.
4.Press Next until desired Call Forwarding type
appears.
5.Press Review.
6.If a number is already programmed, press Change.
7.Press Program.
8.Dial the destination number.
9.Press Save.
10.Press SUPERKEY.
Enable or disable call forwarding 1.Press SUPERKEY.
2.Press No until "Call Forwarding?" appears.
3.Press Yes.
4.Press Next until the desired type of forwarding
appears.
5.Press Review.
6.Press Change.
7.Press TurnOn or TurnOff.
8.Press SUPERKEY.
