Cisco Firepower 4110 Manuel
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
First Published: 2016-03-31
Last Modified: 2021-09-13
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
©2016-2021 Cisco Systems, Inc. All rights reserved.
CONTENTS
Full Cisco Trademarks with Software License ?
Overview 1
CHAPTER 1
Features 1
Deployment Options 4
Package Contents 4
Serial Number Location 6
Front Panel 7
Front Panel LEDs 9
Rear Panel 10
Network Modules 11
10-Gb Network Module 11
40-Gb Network Module 12
Hardware Bypass Network Modules 14
1-Gb Network Module with Hardware Bypass 15
40-Gb Network Module with Hardware Bypass 16
1-Gb SX/10-Gb SR/10-Gb LR Network Module with Hardware Bypass 18
Power Supply Modules 21
Fan Modules 23
Supported SFP/SFP+ and QSFP Transceivers 24
Hardware Specifications 27
Product ID Numbers 29
Power Cord Specifications 32
Installation Preparation 39
CHAPTER 2
Installation Warnings 39
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
iii
Network Equipment-Building System (NEBS) Statements 42
Safety Recommendations 43
Maintain Safety with Electricity 44
Prevent ESD Damage 44
Site Environment 45
Power Supply Considerations 45
Rack Configuration Considerations 45
Rack-Mount and Ground the Chassis 47
CHAPTER 3
Unpack and Inspect the Chassis 47
Rack-Mount the Chassis 48
Ground the Chassis 52
Installation, Maintenance, and Upgrade 55
CHAPTER 4
Install, Remove, and Replace the Network Module 55
Remove and Replace the Fan Module 58
Remove and Replace the SSD 60
Remove and Replace the Power Supply Module 62
Connect the DC Power Supply Module 66
Secure the Power Cord on the AC Power Supply Module 72
Install the FIPS Opacity Shield 75
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
iv
Contents
CHAPTER 1
Overview
•Features, on page 1
•Deployment Options, on page 4
•Package Contents, on page 4
•Serial Number Location, on page 6
•Front Panel, on page 7
•Front Panel LEDs, on page 9
•Rear Panel, on page 10
•Network Modules, on page 11
•Hardware Bypass Network Modules, on page 14
•Power Supply Modules, on page 21
•Fan Modules, on page 23
•Supported SFP/SFP+ and QSFP Transceivers, on page 24
•Hardware Specifications, on page 27
•Product ID Numbers, on page 29
•Power Cord Specifications, on page 32
Features
The Cisco Firepower 4100 series security appliance is a standalone modular security services platform. It is
capable of running multiple security services simultaneously and so is targeted at the data center as a
multiservice platform. The series includes the Firepower 4110, 4120, 4140, and 4150. See Product ID Numbers,
on page 29 for a list of the product IDs (PIDs) associated with the 4100 series.
The Firepower 4100 series supports Cisco Firepower Threat Defense, Cisco Firepower eXtensible Operating
System (FXOS), and Cisco ASA software. See Cisco Firepower 4100/9300 FXOS Compatibility, which lists
software and hardware compatibility information for the Firepower 4100 series.
The following figure shows the Firepower 4100 series security appliance.
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
1
Figure 1: Firepower 4100 Series
The following table lists the features for the Firepower 4100 series.
Table 1: Firepower 4100 Series Features
4150414041204110Feature
•Common Criteria (CC) and Commercial Solutions for Classified (CSFC) for ASA
9.8.xand FTD 6.2.x
• CC for the Network Device Collaborative Protection Profile (NDcPPv2.1) for
ASA 9.12.xand FX-OS 2.6.x
• Federal Information Processing Standards (FIPS) 140-2 on ASA 9.12.x, FTD
6.4.x, and FX-OS 2.6.x
• Department of Defense Information Network Approved Product List (DoDIN
APL) for ASA 9.12.xand FTD 6.4.x.
• US Government Compliance for IPv6 (USGv6) for ASA 9.8.xand FTD 6.2.x
See the "Security Certifications Compliance" chapter in the Cisco FXOS
CLI Configuration Guide or Cisco FXOS Firepower Chassis Manager
Configuration Guide for the procedure to enable security modes.
Note
Security standards
certifications
1 RU
Fits a standard 19-in. (48.3cm) square-hole rack
Form factor
Slide rails, mount ears, and screws included
4-post Electronic Industries Association (EIA)-310-D rack
Rack mount
Front to rear
Cold aisle to hot aisle
Airflow
Single 22-coreSingle 18-core
Single 12-coreProcessor
256-GB DDR4
DRAM
256-GB DDR4
DRAM
128-GB DDR4
DRAM
64-GB DDR4
DRAM
Memory
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
2
Overview
Features
4150414041204110Feature
24
With two 8-port network modules installed
Maximum number
of interfaces
One Gigabit Ethernet
Supports 1-Gb fiber or copper small form-factor pluggable (SFP)
Management port
One RJ-45 consoleSerial port
One USB 2.0 Type AUSB port
Eight fixed 1-Gb and 10-Gb SFP ports (named Ethernet 1/1 through 1/8)Network ports
Eight fixed 1-Gb and 10-Gb SFP ports
See Supported SFP/SFP+ and QSFP Transceivers, on page 24 for a list of supported
transceivers.
Small form-factor
pluggable (SFP)
ports
Displays the serial number; on the front panelPullout asset card
On rear panelGrounding lug
On front panelLocator beacon
On rear panelPower switch
Two network module slots (named network module 2 and network module 3)Network modules
• 8-port 10-Gigabit Ethernet SFP+
• 4-port 40-Gigabit Ethernet QSFP+
• 8-port 1-Gigabit Ethernet copper with hardware bypass
• 2-port 40-Gigabit Ethernet QSFP+ (built-in) with hardware bypass
• 6-port 1-Gigabit Ethernet SX fiber SFP+ (built-in) with hardware bypass
• 6-port 10-Gigabit Ethernet SR fiber SFP+ (built-in) with hardware bypass
• 6-port 10-Gigabit Ethernet LR fiber SFP+ (built-in) with hardware bypass
Supported network
modules
Two (1+1) power supply module slots
Ships with two 400-W AC power supply
modules
Hot-swappable
Two (1+1) power supply module slots
Ships with one 400-W AC power supply
modules
Hot-swappable
AC power supply
OptionalDC power supply
1+1Redundant power
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
3
Overview
Features
4150414041204110Feature
Six fan module slots
3+1 redundancy
Hot-swappable
Fan
Two SSD slots
Ships with one 400-GB SSD installed in
slot 1. Slot 1 is the primary SSD and
should always be present.
RAID is not supported.
Note
The SSD must be installed in slot 1. Slot
2 is optional and is reserved only for the
MSP.
Two SSD slots
Ships with one 200-GB SSD installed in
slot 1. Slot 1 is the primary SSD and
should always be present.
RAID is not supported.
Note
The SSD must be installed in slot 1. Slot
2 is optional and is reserved only for the
Malware Storage Pack (MSP).
Storage
Installed in the second SSD slot onlyMSP
Deployment Options
Here are some examples of how you can deploy the Firepower 4100:
• In a data center using NGFW and ASA
• At the core/aggregation layer of a 3-tier data center in a high availability configuration
• As a dedicated multifunctional security service within converged infrastructure stacks, for example,
vBlock, FlexPod, and so forth, at the access layer
• As a high-performance data center security appliance between the WAN edge and the data center core
in a high availability configuration
• Inter-DC clustering deployments
• In newer spine/leaf data center designs, deployment as a leaf that exclusively offers security functions
Package Contents
The following figure shows the package contents for the Firepower 4100. Note that the contents are subject
to change and your exact contents might contain additional or fewer items.
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
4
Overview
Deployment Options
Figure 2: Firepower 4100 Package Contents
Blue console cable PC terminal adapter2Firepower 4100 chassis1
10/100/1000BASE-T SFP transceiver4Two power cords (country-specific)
See Power Cord Specifications, on page 32 for
a list of supported power cords.
3
Tie wrap clamp6Two slide rails5
Flextronics tie wrap8Artesyn tie wrap7
Ten 8-32 x 0.375 inch Phillips screws used to
secure the mounting bracket to chassis (six
screws), and the cable management brackets to
the mounting brackets (four screws)
10Two M3 x 6 mm screws used to secure the inner
slide rail to the chassis
9
Two 10-32 x 0.375 inch screws used to secure
the ground lug
12Two slide rail locking brackets11
Two cable management brackets14One ground lug #6 AWG, 90 degree, #10 post13
Cisco Firepower 4100
This document has a URL pointing to the
hardware installation guide, a URL pointing the
regulatory and safety guide, and a QR code and
URL pointing to the Getting Started Guide.
15
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
5
Overview
Package Contents
Serial Number Location
The serial number for the Firepower 4100 series chassis is located on the pullout asset card on the front panel.
Figure 3: Serial Number on the 4100 Chassis
You can also view additional model information on the compliance label located on the bottom of the chassis.
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
6
Overview
Serial Number Location
Autres manuels pour Firepower 4110
2
Ce manuel convient aux modèles suivants
3
Table des matières
