Cisco B200 M3 Manuel utilisateur

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco B200 M3 Blade Server

Statement of Volatility

Publication Date: November 19, 2013

The Cisco B200 M3 blade server has multiple serial, electrically erasable, and programmable nonvolatile

memory components (EEPROM and Flash memory) that are used to store manufacturing hardware

identification and hardware configuration information. The majority of serial EEPROMs and flash

memories are not written by users and contain no customer information. Procedures for clearing the few

flash devices that can retain customer data are included in this document.

•Restoring the BIOS to the Factory Default Settings

•Restoring the LSI SAS Controller to the Factory Default Settings

•Restoring the CIMC to the Factory Default Settings

•Resetting the CMOS From UCS Manager

Restoring the BIOS to the Factory Default Settings

Use the following procedure to restore the BIOS to the factory default settings through the UCS Manager

remote KVM or a local KVM I/O cable that is connected directly to the blade server.

Step 1 Press F2 to access the BIOS setup.

Step 2 Click the Save and Exit tab.

Step 3 On the Save and Exit tab, click Load Default Values.

Step 4 Click Yes.

Step 5 Click Save and Exit or press F10.

Step 6 Click Yes to reboot the blade server.

Cisco B200 M3 Blade Server Statement of Volatility

Restoring the LSI SAS Controller to the Factory Default Settings

Use the following procedure to restore the LSI SAS controller to the factory default settings through the

UCS Manager remote KVM or a local KVM I/O cable that is connected directly to the blade server.

Step 1 Press Ctrl-H to log on to the web GUI.

Step 2 Click Start.

Step 3 Click the Controller Properties tab.

Step 4 Click Next.

Step 5 Click Set Factory Defaults.

Step 6 Click Yes.

Step 7 Click Submit.

Step 8 Press Ctrl-Alt-Delete to reboot the blade server.

Restoring the CIMC to the Factory Default Settings

Use the following procedure to restore the Cisco Integrated Management Controller (CIMC) to the

factory default settings.

Step 1 Shut down the blade server to power it down.

Step 2 Remove the blade server from the chassis for 30 seconds or longer to turn off the standby power.

Step 3 Insert the blade server back into the chassis to power it on, which will automatically reboot the CIMC

and restore it to its factory default settings.

Resetting the CMOS From UCS Manager

Use the following procedure to reset the CMOS from UCS Manager.

Step 1 In the UCS Manager navigation window, click the Equipment tab.

Step 2 On the Equipment tab, choose Equipment > Chassis > Chassis Number > Servers.

Step 3 Choose the server on which you want to reset the CMOS.

Step 4 In the Work pane, click the General tab.

Step 5 In the Actions area, click Recover Server.

Step 6 In the Recover Server dialog box, click Reset CMOS and then click OK.

Table des matières

Autres manuels Cisco Serveur

Cisco

Cisco UCS C220 M3 Manuel utilisateur

Cisco

Cisco C880 M4 Manuel utilisateur

Cisco

Cisco C880 Series Instructions de montage

Cisco

Cisco UCS C Series Manuel utilisateur

Cisco

Cisco ONS 15454 ETSI Manuel utilisateur

Cisco

Cisco VPN 3002 Hardware Client Manager Manuel utilisateur

Cisco

Cisco UCS B460 M4 Manuel utilisateur

Cisco

Cisco UCS B200 M3 Manuel

Cisco

Cisco MSE 3365 Manuel utilisateur

Cisco

Cisco 700 series Manuel d'installation et d'exploitation

Cisco

Cisco UCS B Series Manuel d'installation et d'exploitation

Cisco

Cisco UCS C240 Instructions d'installation et d'entretien

Cisco

Cisco TelePresence Manuel de service

Cisco

Cisco UCS C Series Instructions de montage

Cisco

Cisco AS5300 - Universal Access Server Manuel utilisateur

Cisco

Cisco Nexus 7000 Series Manuel utilisateur

Cisco

Cisco UCS B460 M4 Manuel

Cisco

Cisco UCS Manuel utilisateur

Cisco

Cisco 2501 - Router - EN Manuel utilisateur

Cisco

Cisco UCS 5100 Manuel utilisateur

Cisco

Cisco UCS 5100 Manuel utilisateur

Cisco

Cisco AS5200-PWR-AC Manuel de la liste des pièces

Cisco

Cisco TelePresence Server 7010 Fiche technique

Cisco

Cisco UCS B420 M3 Manuel d'installation et d'exploitation

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur