Cisco SPA112 Manuel utilisateur
Intermedia Cloud PBX | Cisco SPA112
Quick Start Guide
2
Welcome to your Cloud PBX Service.
3
What’s in the box?
Cisco SPA112
A. SPA112 ATA
B. Ethernet cable
D.
A.
B.
C.
C. Power adapter
D. Plug end
4
Guided Setup
Your new Fax Adapter (commonly referred to as an Analog Telephone
Adapter or ATA) allows you to use an existing fax machine to send and
receive faxes through the Cloud PBX network. The phone number for
this ATA was included in an email you have already received.
Connecting Cables
Please follow the diagram below to install your ATA.
1 2 3
Do not
use
Connect to
Fax Machine
Connect
to Router
or Switch
Plug in
Power
Cable
5
1. Connect your fax machine to the ATA by plugging one end of the
included phone cord into the Phone 1 port on the ATA, and the other
end into the Line port on your fax machine.
2. Connect the included Ethernet cable to the Internet port on the ATA
and connect it to a switch or router in your network.
3. Connect the included power cable to the power port on the ATA and
plug in the power cable.
Once properly connected to your network, the ATA will need several
minutes to download conguration settings and restart. Once nished,
the ATA will provide dial tone for your fax machine.
6
Using Your ATA
Fax Machine Configuration
If you are having problems with faxing, you may need to refer to your
fax machine owner’s manual and adjust the conguration on your fax
machine. For best performance with Cloud PBX:
• If your fax machine has an “ECM” (Error Correction Mode) feature,
please disable this function.
• Check your fax machine’s speed (sometimes called “Baud Rate”),
and set it to 9600 or lowest possible speed.
If you are unsure of how to make these changes, please refer to your fax
machine Owner’s Manual.
Sending a Fax
Once your fax machine has been plugged into the Phone 1 port on the
ATA, send a fax as you usually would with your fax machine.
Receiving a Fax
If your fax number is new, make sure you have provided your fax phone
number to those who wish to send you faxes. Your fax machine will
receive faxes automatically once plugged into the fax adapter.
7
Updating Your ATA
You may make changes to your ATA within the Control Panel.
Logging into the Control Panel
• Go to http:www.intermedia.net/login
• Click the ‘For admins’ tab
• Enter the Account Owner’s user name and password
• Press the ‘Login’ button
Updating Outbound Caller ID
Within the Control Panel:
• Click on the Devices tab
• Locate the ATA in question and click on the link
• Click on the ‘Outbound caller ID’ tab on the left side
• Choose whether you wish to:
• Use the ATA’s own phone number
• Use a dierent phone number on the account
• Block outbound caller ID
• Click ‘Save changes’
8
Updating 911 Address
Within the Control Panel:
• Click on the Devices tab
• Locate the ATA in question and click on the link
• Click on the ‘911 Address’ tab on the left side
• Update the address as appropriate
• Read the 911 Policy and Limitations
• Check the box that you read and understand the 911 Policy and
Limitations
• Click ‘Save changes’
Viewing Call History
Within the Control Panel:
• Click on the Devices tab
• Locate the ATA in question and click on the link
• Click on the ‘Call history’ tab on the left side
• Select the date range you wish to view
9
Autres manuels pour SPA112
6
Table des matières
Autres manuels Cisco PBX
Manuels PBX populaires d'autres marques
Allo.com
Allo.com Nano 2 Manuel utilisateur
ZYCOD
ZYCOD ZX50 Manuel utilisateur
Panasonic
Panasonic KX-TDA100BX Manuel utilisateur
LV switch
LV switch IPPBX800 Manuel d'instructions
Edge-Core
Edge-Core VST3305 Manuel utilisateur
Panasonic
Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Manuel utilisateur
Rauland-Borg
Rauland-Borg Telecenter IV Manuel utilisateur
Grandstream Networks
Grandstream Networks UCM6208 Manuel utilisateur
ATCOM
ATCOM IPPBX IP02 Manuel utilisateur
Panasonic
Panasonic KX-TVS50 - 2 Port Voicemail System Manuel utilisateur
bintec elmeg
bintec elmeg elmeg hybird 600 Manuel utilisateur
Panasonic
Panasonic KX-NS300 Manuel utilisateur
