Cisco Telepresence MX800 Manuel utilisateur

Installation guide

for Cisco TelePresence MX800 Dual Monitor with Dual Camera

on a free standing oor stand or a oor stand secured to the wall

http://www.cisco.com/go/mx-docs

Installation guide for Cisco TelePresence MX800 Dual - Floor stand

Page 2

Manpower

We recommend four people working together

to mount the system. Follow local regulations.

Dimensions

Height: 1818 mm / 71.6 in.

Width: 3169mm / 124.8in.

Depth: 156 or 215 mm / 6.2 or 8.5in. (wall secured)

920mm / 36.3 in. (free standing)

Weight: 238kg / 525lb

Floor stand secured to the wall

This guide covers the floor stand mounted MX800 Dual

in either the free standing or wall secured configurations.

Free standing floor stand

Room setup

Explore the Cisco Project Workplace to find

inspiration and guidelines when preparing your

office or meeting room for video conferencing,

http://www.cisco.com/go/projectworkplace

Documentation

Cisco Spark: Visit the Cisco Spark help site to

find more information about Spark registered

room systems, http://help.ciscospark.com

Other services: Visit the Cisco web site

to find user guides and compliance and

safety information for the video system,

http://www.cisco.com/go/mx-docs

Installation guide for Cisco TelePresence MX800 Dual - Floor stand

Page 3

Packaging

1Open the plastic snap locks and remove the side walls.

2Lay the box marked with F-J+L+M flat on the floor. Remove

the lid. Boxes F to J, L and M are inside.

Lay the box marked with A and B+C+E+K flat on the floor.

Remove the lid. Boxes B, C, E and K are inside.

Boxes are labeled A to M. This guide

refers to the labels.

A M

...

B+E-G Shows which boxes are inside.

Tools and screws are in this box.

F-J+L+M B+C+E+K A

Installation guide for Cisco TelePresence MX800 Dual - Floor stand

Page 4

Screws

The screw kit may contain more screws than you need,

because the same kit is shipped with all mounting options.

Tools

Allen key, 4 mm

Allen key, 2.5mm

Torx T20

M6x90, countersunk

Tool: Allen key, 4mm

M6x35, countersunk

Tool: Allen key, 4mm

M6x12, countersunk

Tool: Allen key, 4mm

M6x12, pan

Tool: Allen key, 4mm

M4x8, pan

Tool: Allen key, 2.5 mm

PT4x10, pan

Tool: Torx T20

EMC Class A declaration

WARNING: This is a class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to take

adequate measures.

声

明

此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种

情况下，可能需要用户对其干扰采取切实可行的措施。

WARNING: This is a class A product. In a domestic environment

this product may cause radio interference in which case the user

may be required to take adequate measures.

1Remove covers from floor stand parts

Installation guide for Cisco TelePresence MX800 Dual - Floor stand

Page 5

Set aside the covers. They will be

replaced when the system is fully

assembled and tested (step 20).

Front

2Assemble floor stand

B, I

Installation guide for Cisco TelePresence MX800 Dual - Floor stand

Page 6

Fasten the upper and lower center parts

simultaneously, first one side; then the

other side.

Six screws from the back

and four from the top.

10 × M6x12, countersunk

8 × M6x12, countersunk

3Fasten center bracket

Installation guide for Cisco TelePresence MX800 Dual - Floor stand

Page 7

Front

2 × M6x12, pan

4Secure floor stand

Installation guide for Cisco TelePresence MX800 Dual - Floor stand

Page 8

Option A:

Mount the feet to the floor stand to allow it to be free standing.

Front

4 × M6x35, countersunk

Option B (secured to the wall) is described on the next page.

4Secure floor stand

Option A (free standing with feet) is described on the previous page.

Installation guide for Cisco TelePresence MX800 Dual - Floor stand

Page 9

Mounting positions, side view

94 mm / 3.70 in. 37 mm / 1.46 in.

The system must be installed by qualified

personnel, in accordance with state and

local building regulations.

The wall and mounting hardware must be

able to safely support the product.

The wall brackets have two mounting positions.

Position the brackets the way that suits your

room the best.

4 × M6x12, pan

Front

2Mark the screw holes on the wall. The screws pass through

the horizontal slots on the wall bracket.

Hold the wall bracket towards the wall

and place the floor stand on the wall

bracket. Move them in place and mark

the screw holes on the wall. Repeat for

the other wall bracket.

Fasten each wall bracket in a secure

manner ensuring that the wall’s structure

is sufficient to support the system

(screws/mounting hardware not provided;

not shown in illustration).

Fasten the floor stand to the wall brackets with

the four screws (provided).

Option B:

Use the wall brackets provided to secure the floor stand to the wall.

5Read this before you mount the monitors

Installation guide for Cisco TelePresence MX800 Dual - Floor stand

Page 10

Right monitor, rearLeft monitor, rear

Use lifting handles

To avoid trapping your fingers, use the lifting

handles at the bottom of the monitor.

The screws with wing nut, which you

can see from the sides of the monitor,

must enter the center slot on each side

of the floor stand.

The monitors are heavy.

We recommend four people working

together to mount the monitors. Two

people should lift the monitor using the

handles as described below; the other

people must help stabilizing the monitor

and check that the monitor enters the

slots properly.

Applies to systems that are secured to the

wall: To assure that the camera can move

freely, fasten two bumpons on the rear of

the top profile, close to the camera.

Autres manuels pour Telepresence MX800

Table des matières

Autres manuels Cisco Système de conférence

Cisco

Cisco TelePresence IX5000 Manuel utilisateur

Cisco

Cisco MXP Series Manuel utilisateur

Cisco

Cisco TelePresence MX700 Manuel utilisateur

Cisco

Cisco Unified MeetingPlace Web Conferencing Manuel d'installation et d'exploitation

Cisco

Cisco 3515 MCU12 Manuel d'installation et d'exploitation

Cisco

Cisco Webex Room Kit Manuel utilisateur

Cisco

Cisco TelePresence System Codec C90 Manuel de service

Cisco

Cisco TelePresence MX200G2 Manuel utilisateur

Cisco

Cisco Webex Room 70 Dual G2 Manuel utilisateur

Cisco

Cisco EX90 Manuel utilisateur

Cisco

Cisco EX60 Manuel utilisateur

Cisco

Cisco TelePresence SpeakerTrack 60 Manuel utilisateur

Cisco

Cisco CTS-SX10-K9 Manuel utilisateur

Cisco

Cisco MX200 G2 Manuel de service

Cisco

Cisco MCU24 Manuel d'installation et d'exploitation

Cisco

Cisco MX Series Manuel utilisateur

Cisco

Cisco TelePresence System Codec C40 Manuel de service

Cisco

Cisco UC500 series Guide d'installation

Cisco

Cisco TelePresence SX20 Manuel utilisateur

Cisco

Cisco EX60 Manuel utilisateur

Cisco

Cisco TelePresence System Codec C90 Manuel utilisateur

Cisco

Cisco EX90 Manuel utilisateur

Cisco

Cisco EX90 Manuel utilisateur

Cisco

Cisco 7937G - Unified IP Conference Station VoIP... Mode d’emploi

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur