CIRGO
R
Build your CRUISE
02
1. Remove CRUISE out of the box and place it on a flat ground.
For optimal results and safety, it is advised to have your CRUISE assembled by a reputable
local shop or an experienced technician for proper installation and adjustment of all
components, maximising performance and safety.
2. Use a 4mm hex key, turn counter clockwise to unscrew the 4 handlebar clamp
fasteners (M5x22mm). Place the fasteners and handlebar clamp in a safe location.
#chargeahead
3
4mm hex key
Scan me for assembly video and
experience years of fun ahead.
cirgo.bike/watch-cruise
3. Align the handlebar according to the levelling guide on the stem.
