- 7 -
• Do not strike the touch panel with a hard or pointed object, or press on the touch
panel with too much pressure, since it may damage the touch panel or the display.
• Do not install the PC where the ambient temperature exceeds the allowed range
(0
–
50℃). Doing so may cause the PC to malfunction or shorten product lifespan.
• Do not restrict or limit naturally occurring rear-face ventilation of the PC, or storing
or using the PC in an environment that is too hot.
• Do not use the PC in areas where large, sudden temperature changes can occur.
These changes can cause condensation to form inside the unit, possibly causing
the unit to malfunction.
• Do not allow water, liquids, metal or charged particles to enter the PC, since they
can cause either a PC malfunction or an electric shock.
• Do not store or use the PC in direct sunlight, or in excessively dusty or dirty
environments. Do not store or use the PC where strong jolting or excessive
vibration can occur.
• Do not store or use the PC where chemicals (such as organic solvents, etc.) and
acids can evaporate, or where chemicals and acids are present in the air.
• Do not use paint thinner or organic solvents to clean the PC.
•Do not store LCDpanel where the ambient temperature is lower than the its range
(-20℃
–
60℃). Doing so may cause congelation of liquid contained in LCD which
result in damage to the product.
•Do not store LCD panel where the ambient temperature is higher than the its
range (-20℃
–
60℃). Doing so may cause the liquid contained in LCD to become
isotropic and unreduced.
• After turning the PC OFF, be sure to wait 20 seconds before turning it ON again.
If the PC started too soon, it may not start up properly.
• Backup your PC project regularly to prepare for the unexpected accident.
• It is not recommended to update Windows by yourself. Please contact
manufacturer for Windows Update.
Precautions for unit disposal
•
When this unit is disposed of, it should be done according to your country’s
regulation for similar types of industrial waste.