Chuango AWV Plus Manuel utilisateur

AWV Plus

WiFi Alarm System with HD WiFi Camera

User Manual

status

Foreword

Congratulations on your purchase of the AWV Plus Alarm system. Before you com-

mence installation we recommend that you unpack the product, familiarise yourself

with the component parts, and carefully read through this instruction guide.

There are some parts of the installation must be completed in the order shown to

ensure successful installation.

Disclaimer

All statements, technical information and recommendations in this manual

are believed to be reliable, but the accuracy and completeness thereof are not

guaranteed or warranted.

The specications and information regarding the products as shown in this

document are subject to change without notice.

The reproduction, language translation modication, storage in a retrieval system

or retransmission, in any form or by any means, electronic, mechanical or otherwise,

is strictly prohibited without prior written permission.

In no event are we liable for any indirect, special, incidental, or consequential

damages, including, without limitation, lost prots or loss or damage to data arising

out of the use or inability to use this document.

Contents

Packing List ............................................................................................................................................1

Hub ......................................................................................................................................................2~3

Remote Control .....................................................................................................................................4

Door/Window Contact .......................................................................................................................5

Pairing New Accessories to the Hub .............................................................................................6

Getting Started ................................................................................................................................. 6-7

App Control and Settings ...........................................................................................................8-14

Interference Detection .....................................................................................................................14

Restoring to Factory Settings ........................................................................................................14

Installation ..................................................................................................................................... 15-16

Replacing Accessory Batteries ......................................................................................................17

FAQ ................................................................................................................................................... 17-18

Specications ............................................................................................................................... 19-20

Packing List

1x AW1 Plus Hub

status

1x IP116 Plus HD WiFi Camera 2x DWC-102 Door/ Window Contact

1x RC-80 Remote Control 2x Power Adapter 1x Camera Reset Pin

1 2

Hub

All Sensors are wirelessly linked to the Hub.

In the event of alarm activation, for example, when a Sensor is triggered, a push

notification will automatically be sent to all registered users

The system can be controlled and monitored both on-site using the Remote Control

supplied and remotely from anywhere in the world, with the FREE iOS and Android

Apps.

The system can easily be expanded to include up to: 50 Wireless Sensors and 10

Remote Controls.

WiFi Indicator

Status Indicator

Network Configuration

Power Switch

AC Adapter Jack

Learn Button

LED Indication

WiFi Indicator

(Blue)

Steady On Connected with Router

One ash per second Searching for a network or disconnected

from Router

Off The Power Adapter is not plugged in

Status

Indicator

(Red, Blue

and Green)

Steady On Stable WiFi connection

Red System is Armed

Blue System is in Home Mode (Part Arm)

Green System is Disarmed

Blue light blinking Disconnected from the Router

Red light ashes

quickly Alarm condition

Flashes every 3

seconds Low battery

Functionality of Buttons behind the Back Cover

Learn Used to pair an accessory with the Hub

WiFi Used to pair the Hub with the Router

On/off Power Switch

Note: The Hub must be plugged in to the Power Adapter in order to maintain the WiFi

connection.

When AC power is lost, the Hub will last for 2 minutes to send out a push notication to the

connected smartphones, and the sounder will keep beeping for 30 seconds.

3 4

Remote Control

The Remote Control can be used to arm, part arm or disarm the system, and trigger

an emergency alarm (SOS).

Status Indicator

Disarm

Arm

Home Arm

(Part Arm) SOS Button

Button System Status

All Sensors will be Armed. This mode is for use when the property is unoccupied.

The System will be Disarmed, no Sensors will be triggered.

Note: When set to ‘Disarm’, Fire, Smoke, and Gas Leakage Sensors (need to

purchase separately) will remain active as they are factory set to Instant Alarm

Zone

Sensors which are set to the Inactivated Zone will not be Armed. All other

Sensors will be Armed. This mode allows for selected Sensors (for example,

front/back door(s) to be Armed, allowing the occupier freedom of movement

within the property.

The SOS Button will trigger an ‘emergency’ alert notication to registered users

regardless of the Hub mode.

Press the [ ] button. After the indicator on the remote control blinks once,

press [ ] button within 3 seconds to mutely arm the system.

Press the [ ] button. After the indicator on the Remote Control blinks once,

press [ ] button within 3 seconds to mutely disarm the system.

Note: To turn off the Arm/Disarm tone permanently, open the App, go to "Settings"-"My Hub"-

"Arm / Disarm beep(s)".

Door/ Window Contact

Door/ Window Contacts are set to ‘Normal Zone’ by default and are ideal for

protecting entry/exit points such as front and back doors and windows. When the

system is Armed, should a Door Contact be triggered (Magnet separated from the

Transmitter), a push notication showing the named Sensor will automatically be

sent to the registered users and the Hub Internal Siren will sound immediately.

Triggers

when ＞1cm

LED blinks once

Tamper Switch

The Tamper Switch (small black button underneath the back cover) will activate an

alarm condition if an unauthorized attempt is made to remove the Contact from its

installed location.

Low Battery Indication

If the LED indicator ashes once per 3 second, the battery must be replaced.

5 6

Pairing New Accessories to the Hub

There are two ways of pairing Accessories to the Hub – manually and via App.

Manual Pairing

To pair Accessories manually please follow the instructions below:

Remote Control and Sensors:

1. Press the Learn button at the back of the Hub

2. Press any button on the Remote Control or trigger the Sensor

Please note that pressing the Tamper Switch instead of triggering the Sensor will

(Optional Accessory) Wireless Siren:

1. Press the Learn Button on the Siren

2. Arm the Hub via the App

Pairing from the App

To pair the Accessories via App, open the WiFi Alarm App, go to ‘Accessory Setting’

and follow the instructions on the screen.

Getting Started

Step One: Download the App

Step Two: Sign Up / In

Press the "Sign up" button on the page, and follow the instructions to create your

account rst.

Once you have an account, select the "Sign in" button to enter the operation page.

Step Three: Connect the Hub to Your Router

Power on the Hub, then follow the conguration steps on App to set up your Hub

with your home WiFi. Once the connection is nished, the Hub will beep once, wait

until the WiFi indicator and the Status indicator stop blinking, you are ready to op-

erate your alarm system.

Important: AW1 Plus does not support WiFi of 5GHz band, If dual-band (5GHz and

2.4GHz) router is used, make sure to connect with the 2.4GHz WiFi instead of the

5GHz's. Make sure your smartphone is connected to the local WiFi network and

then follow the steps in the App to connect the AW1 Plus Hub to the router.

Note: If the connection was failed, please consult to FAQ in page 18 or contact our technical

support.

Step Four: Connect the Camera to Your Router

Power on the camera, tap on [+] Button and then follow the conguration steps on

App to set up your Camera with your home WiFi.

More details about the camera in this kit, please refer to “Help”on App.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Chuango Système de sécurité

Chuango

Chuango G5 Manuel utilisateur

Chuango

Chuango WS-105 Manuel utilisateur

Chuango

Chuango SPS-260 Manuel utilisateur

Chuango

Chuango O2 Manuel utilisateur

Chuango

Chuango CG-B11 Manuel utilisateur

Chuango

Chuango B11 Manuel utilisateur

Chuango

Chuango CG-A11 Manuel utilisateur

Chuango

Chuango G5 Manuel utilisateur

Chuango

Chuango WS-280 Manuel utilisateur

Chuango

Chuango OV-300 Manuel utilisateur

Chuango

Chuango AW1 Plus Manuel utilisateur

Chuango

Chuango G5 Manuel utilisateur

Chuango

Chuango G5 Manuel utilisateur

Chuango

Chuango LTE-400 Manuel utilisateur

Chuango

Chuango H4 PLUS Manuel utilisateur

Chuango

Chuango G5 Manuel utilisateur

Chuango

Chuango A11 Manuel utilisateur

Chuango

Chuango OV6 Manuel utilisateur

Chuango

Chuango A9 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur