Chromlech JARAG-5 Manuel utilisateur

JARAG-5

User Manual

Rev D

JA121 - JA221

FW V2.3

Chromlech

19, avenue Gabriel Fauré

35235 TH RIGNE-F UILLARD

FRANCE

Tel: +33 (0)2.23.20.77.67

Fax: +33 (0)2.23.20.75.71

E-mail: contac[email protected]m

Web: www.chromlech.com

Table of Contents

Table of Contents ............................................................................................................... 1

1. The JARAG-5 .................................................................................................................. 2

Lamp array ................................................................................................................................ 2

Internal sequencer .................................................................................................................... 2

6 DMX channel personality ........................................................................................................ 3

25 DMX channel personality ...................................................................................................... 3

31 DMX channel personality ...................................................................................................... 3

JA121 dimensions .................................................................................................................... 4

JA221 dimensions .................................................................................................................... 4

2. Installation ....................................................................................................................... 5

Direct fastening ......................................................................................................................... 5

Using the yoke mounting ........................................................................................................... 5

Stacking arrays ......................................................................................................................... 5

3. Precautions in use .......................................................................................................... 6

4. Control panel ................................................................................................................... 7

Connectors ................................................................................................................................ 8

Indicators .................................................................................................................................. 9

Setup menu ............................................................................................................................. 10

Setup menu structure .............................................................................................................. 10

5. DMX control .................................................................................................................. 12

6 channel personality (sequences) .......................................................................................... 12

25 channel personality (matrix) ............................................................................................... 14

31 channel personality (dual) .................................................................................................. 14

6. Programming ................................................................................................................ 15

7. Specifications ................................................................................................................ 16

8. Part numbers ................................................................................................................ 16

Sequence table ................................................................................................................ 17

JARAG-5 User Manual 1

1. The JARAG-5

The JARAG-5 provides the same light output as a conventional lighting system but can be

used to create a wide range of lighting effects. The dimmers, sequencer and control

interfaces are built in so that the system can be installed simply and easily. It only requires

a mains supply and an external DMX controller.

Lamp array

The JARAG-5 has a 25 lamp array. The type of lamp used depends on the lighting system

model: The JA121 takes PAR20 lamps (GU10), and the JA221 takes PAR30 lamps (E26).

The lamps are controlled individually by a built-in 25 channel dimmer.

Internal sequencer

The lighting system has an internal sequencer which makes it easier to control the lamp

array. The sequencer can store up to 256 sequences.

A sequence is a series of steps (maximum 32) played in a loop and the brightness, speed

and effects can be adjusted in real time. Each step defines the state of each of the 25

lamps.

The sequences are stored in 16 banks of 16 sequences. The sequences for banks 1 to 8

are factory set and cannot be changed. These sequences are common to all JARAG-5s

and provide a firm basis for creating lighting effects with the same controls for any lighting

system (see description of sequences in the appendix).

The sequences for banks 9 to 16 can be defined by the user. These sequences allow

each lighting system to be set up to meet the user's requirements.

The sequences are programmed using special software supplied free of charge

(downloaded from www.chromlech.com) that operates under PC/Windows. The

sequences can be defined and then uploaded into the lighting systems. A graphic

interface allows for simulating the sequences that have been defined.

2 JARAG-5 User Manual

6 DMX channel personality

In 6 channel mode, the 25 lamp sequence is controlled by the built-in sequencer

controlled by DMX using 6 channels to control all 25 lamps.

The sequences are controlled by DMX: selection of the sequence, speed of sequencing,

overall brightness, fade time between steps, orientation and reflection of the patterns.

The sequencer can store 256 32-step sequences, each step defining the state of all 25

lamps. Any lighting pattern can be defined as well as transitions.

The first 128 sequences are defined internally and are the same for all JARAG-5s,

providing a firm basis for creating lighting effects with the same controls for any lighting

system (see description of sequences in the appendix).

All of the remaining 128 sequences can be defined by the user to meet his requirements.

Pre-coding special sequences makes it possible to have optimal light sequences for each

lighting system.

The sequences are programmed using special software supplied free of charge

(downloaded from www.chromlech.com) that operates under PC/Windows. The

sequences can be defined and then uploaded into the lighting systems. A graphic

interface allows for simulating the sequences that have been defined.

25 DMX channel personality

The 25 DMX channel personality is used to control the 25 lamp array directly (each DMX

channel corresponds to one lamp). In this case, the internal sequencer and the sequences

it contains are not used.

31 DMX channel personality

The 31 DMX channel personality makes it possible to use the 6 channel sequencer mode

at the same time as the 25 channel matrix mode. The lighting system uses a Highest

Takes Precedence (HTP) priority system for each lamp.

This allows a matrix controller to be used, for example for overall animation of a JARAG

light wall, while still being able to use the internal sequences that can be superimposed as

required.

JARAG-5 User Manual 3

JA121 dimensions

JA221 dimensions

4 JARAG-5 User Manual

63 mm diam.

576 mm

576mm

240 mm

209 mm

200 mm200 mm

M10

JA121 – front view JA121 – side view

JA221 – front view JA221 – side view

576 mm

576mm

95 mm diam.

269 mm

238 mm

200 mm200 mm

M10

2. Installation

The JARAG-5 can be installed in any orientation.

Direct fastenin

There are 24 M10 holes on the edges of the JARAG-5 chassis (12 at the front and 12 at

the back) so that the lighting system can be suspended using hooks, slings or shackles.

Usin the yoke mountin

The yoke mounting is attached to 4 holes on the side of the JARAG-5 to adjust the

inclination and orientation of the lighting system easily.

Stackin arrays

The JARAG-5 lighting systems can be stacked to form larger arrays using M10 bolts in the

side holes.

JARAG-5 User Manual 5

3. Precautions in use

The JARAG-5 lighting system has its own power control unit and is designed to be

connected directly to the mains. It must not be powered through a dimmer.

Switch off unit before disconnecting mains.

The lighting system should be disconnected from the mains before any maintenance or

relamping operation. The rear panel must not be opened when the lighting system is

powered up. Refer servicing to qualified service personal only.

Before use, check that the lighting system cable and plug are in good conditions and that

the power supply used is correctly earthed.

The lighting system should not be exposed to rain or water. Not for residential use.

The lighting system must always be secured with an appropriate safety cable.

Intense heat - Lamps are hot - Avoid contact by persons and materials

WARNING

Read user’s guide for safety instructions

Min distance to flammable material = 0,6 m

Min distance to illuminated surface = 1,60m

Maximum ambient temperature ta = 35°C

Maximum exterior surface temperature = 100°C

CAUTI N - Risk of fire and electric shock.

Use PAR lamps 75W max. with aluminium reflector only

Replace fuse FU1 and FU2 only with fuse of same type and rating (230V lamps :

6.3x32mm T 10A 250V or 115V lamps : 6.3x32mm T 20A 250V).

N TE:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

6 JARAG-5 User Manual

. Control panel

The main operating parameters can be set using the built-in control panel. This panel has

four keys and a display and is located on the back of the lighting system. The settings are

stored in non-volatile memory.

Control panel (rear)

JARAG-5 User Manual 7

. .. .

EXIT ENTER

POWER

STATUS

DMX

JARAG - 5

WARNING : lamps are hot

For professional use only

Disconnect power before servicing the equipment

230 V - 25x MAX 75W = 1875 W - 8,2 A

Min distance to lighted object : 1 m

Min distance to flammable objects : 1 m

Max ambient temperature : 0°C

Max exterior surface temperature : 60°C

− +

Made in France

DMX IN DMX OUT RS232

Connectors

DMX IN

Function DMX 512 input

Type XLR 5 pin male

Pinout 1: Shield (ground)

2: DMX – (primary data – )

3: DMX + (primary data + )

4: Not connected

5: Not connected

DMX OUT

Function DMX 512 output

Type XLR 5 pin female

Pinout 1: Shield (ground)

2: DMX – (primary data – )

3: DMX + (primary data + )

4: Not connected

5: Not connected

RS232

Function SubD 9 pin female

Type Serial link to PC

Pinout 1: Not connected

2: TX (output)

3: RX (input)

4: DTR (input)

5: Ground

6: Not connected

7: Not connected

8 Not connected

9: Not connected

8 JARAG-5 User Manual

Table des matières

Autres manuels Chromlech Équipement d'éclairage

Chromlech

Chromlech elidy Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur