Christie MicroTiles Instructions de montage
Installation and Setup Guide
020-102825-04
MicroTiles LED
NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2022 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this
document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary
depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on
information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied
warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection
with the performance or use of this material. Our centers of excellence for manufacturing in Kitchener, Ontario, Canada and in Shenzhen, China are ISO
9001:2015 Quality Management System-certified.
For the most current technical documentation and office contact information, visit http://www.christiedigital.com.
Warranty
Products are warranted under Christie’s standard limited warranty, the details of which are available at https://www.christiedigital.com/help-center/
warranties/ or by contacting your Christie dealer or Christie.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in
accordance with the maintenance schedule specified by Christie, will void the warranty.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at the user’s own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
CAN ICES-3 (A) / NMB-3 (A)
이 기기는 업무용(A급)으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
ENVIRONMENTAL
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical
and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according
to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products.
If printing this document, consider printing only the pages you need and select the double-sided option.
Please help us to conserve the environment we live in!
Content
Product overview..................................................5
Product documentation................................................5
Related documentation..............................................5
Important safeguards.................................................6
General safety precautions........................................... 6
AC power precautions...............................................6
Remote Power Rack Shelf safety warnings..................................7
Product labels................................................... 7
Typical MicroTiles LED solution...........................................9
Cable and component layout and design....................................10
Wall controller interface and ports......................................11
Octroller ports.................................................. 12
Technical support...................................................13
Installation and setup..............................................14
Installing the mounting sheets.......................................... 15
Hanging the mounting template....................................... 15
Installing the wall anchors...........................................17
Installing the metal mounting sheets.................................... 18
Adjusting the wall to be flat..........................................19
Adjusting and leveling the mounting sheets................................21
Installing and configuring the Remote Power Rack Shelf ..........................22
Mounting the Remote Power Rack Shelf...................................22
Connecting the Octroller power cables to the Remote Power Rack Shelf...............22
Resetting the breakers.............................................23
Installing the LED wall controller.........................................23
Powering on the array................................................23
Mounting the Octroller............................................... 24
Cabling the array...................................................24
Installing the chassis and LED tiles........................................25
Displaying a test pattern............................................25
Removing LED modules.............................................26
Securing the LED modules.............................................26
Verifying the hardware installation........................................27
MicroTiles LED Installation and Setup Guide 3
020-102825-04 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Accessing the MicroTiles LED web user interface............................. 27
Setting up MicroTiles LED for 3D.........................................27
3D requirements.................................................28
Active stereo 3D configuration........................................ 28
Cabling the array.................................................29
Enabling 3D....................................................29
Disposing of the product packaging....................................... 30
Completing the initial configuration...................................31
Automatically mapping tiles in the array.................................... 31
Selecting the input..................................................31
Adjusting the brightness levels of the seams between tiles.........................32
Regulatory...................................................... 34
Safety......................................................... 34
Electro-magnetic compatibility.......................................... 34
Emissions..................................................... 34
Immunity..................................................... 35
Environmental.................................................... 35
Content
MicroTiles LED Installation and Setup Guide 4
020-102825-04 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Product overview
Christie MicroTiles LED tiles are modular, high-quality image display units that can be configured to
create small display configurations as well as larger more complex display canvases of virtually any
size and shape.
Each tile captures a portion of the image and applies scaling, as required, which results in a single
picture. The LED wall controller acts as the main system controller and coordinates with all connected
tiles to form a canvas.
Christie MicroTiles LED tiles are designed to occupy a smaller more manageable install footprint with
minimal mechanical and electronics components. The simplicity of the design ensures higher reliability
and improved thermal management.
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
website. Read all instructions before using or servicing this product.
1. Access the documentation from the Christie website:
• Go to this URL: http://bit.ly/2DE9cnu or
https://www.christiedigital.com/en-us/digital-signage/products/led-tiles/microtiles-led.
• Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on this product is available in the following documents.
•MicroTiles LED Product Safety Guide (P/N: 020-102824-XX)
•MicroTiles LED User Guide (P/N: 020-102835-XX)
•MicroTiles LED Specifications Guide (P/N: 020-102836-XX)
•MicroTiles LED Serial Commands Guide (P/N: 020-103050-XX)
•MicroTiles LED Status System Guide (P/N: 020-103556-XX)
•Replacing LED modules in a MicroTiles LED array (P/N: 020-103059-XX)
•Removing the MicroTiles LED chassis (P/N: 020-102670-XX)
MicroTiles LED Installation and Setup Guide 5
020-102825-04 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Important safeguards
To prevent personal injury and to protect the device from damage, read and follow these safety
precautions.
General safety precautions
Read all safety and warning guidelines before installing MicroTiles LED.
Warning! If not avoided, the following could result in death or serious injury.
• Observe all electrostatic precautions. Use a grounded wrist strap and insulated tools when
handling, servicing, or cleaning electronic assemblies.
• A minimum of two people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
• A certified electrician must be present during installation to ensure the installation meets the
local electrical code.
• Motors and fans may start without warning.
• SHOCK HAZARD! Power supply uses double pole/neutral fusing. Disconnect all power sources
before opening the product.
Notice. If not avoided, the following could result in property damage.
• Always wear clean, lint-free gloves when handling the product.
AC power precautions
Learn the safety precautions related to AC power.
Caution! If not avoided, the following could result in minor or moderate injury.
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.
• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.
• FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and
power plug meet the appropriate local rating standards.
Product overview
MicroTiles LED Installation and Setup Guide 6
020-102825-04 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Remote Power Rack Shelf safety warnings
To prevent personal injury and to protect the device from damage, read and follow these safety
precautions.
Warning! If not avoided, the following could result in death or serious injury.
• Only Christie qualified technicians are permitted to open product enclosures.
• This product must be installed within a restricted access location not accessible by the general
public.
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• A minimum of two people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
• A certified electrician must be present during installation to ensure the installation meets the
local electrical code.
• Install the product near an easily accessible AC receptacle.
• Hazardous voltages are present at power system inputs. The DC output, though not dangerous
in voltage, has a high short-circuit current capacity that may cause severe burns and electrical
arcing.
• SHOCK HAZARD! Power supply uses double pole/neutral fusing. Disconnect all power sources
before opening the product.
• Before working with live power systems, remove all metallic jewelry (such as watches, rings,
metal rimmed glasses, or necklaces) and wear safety glasses with side shields at all times during
the installation.
• Motors and fans may start without warning.
• Use insulated hand tools while working on live power systems.
Product labels
Learn about the labels that may be used on the product. Labels on your product may be yellow or
black and white.
General hazards
Hazard warnings also apply to accessories once they are installed in a Christie product that is
connected to power.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this product to rain or moisture.
Do not alter the power plug, overload the power outlet, or use it with extension cords.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Product overview
MicroTiles LED Installation and Setup Guide 7
020-102825-04 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
General hazard.
Electrocution hazard. To avoid personal injury, always disconnect all power sources before
performing maintenance or service procedures.
Burn hazard. To avoid personal injury, allow the product to cool for the recommended cool
down time before performing maintenance or service.
Mandatory action
Caution! If not avoided, the following could result in minor or moderate injury.
SHOCK HAZARD! Disconnect all power sources before performing maintenance or
service procedures.
Consult the service manual.
Electrical labels
Indicates the presence of an earth ground.
Product overview
MicroTiles LED Installation and Setup Guide 8
020-102825-04 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Typical MicroTiles LED solution
A typical MicroTiles LED installation contains a variety of components.
A LED tiles
B Octrollers—Each Octroller can control up to eight LED tiles.
C Remote Power Rack Shelf
D LED Wall Controller
E Video matrix switch and splicing video processor
F Control computer for accessing the web user interface (WebUI)
G Media sources
Product overview
MicroTiles LED Installation and Setup Guide 9
020-102825-04 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Cable and component layout and design
Before an array is constructed, plan the design layout of the tiles to make sure that the controller
placement and the cabling layout support the overall tile design objectives.
The LED display system offers considerable flexibility in terms of the number of media sources that
can be displayed and the overall resolution. Color and brightness matching, as well as other functions,
may be performed across an entire array.
The video source connections between the components are represented by the blue line. The power
connections between the components are represented by the red line.
Product overview
MicroTiles LED Installation and Setup Guide 10
020-102825-04 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Autres manuels pour MicroTiles
8
Table des matières
Autres manuels Christie Équipement d'éclairage
Manuels Équipement d'éclairage populaires d'autres marques
Qazqa
Qazqa Suplux SL 3 Black 103062 Manuel utilisateur
Commercial Electric
Commercial Electric 54568141 Manuel utilisateur
CREE LIGHTING
CREE LIGHTING 304 Series Manuel utilisateur
Goobay
Goobay 49867 Manuel utilisateur
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manuel utilisateur
Alkalite
Alkalite Krypton KT-81 Manuel utilisateur
