Christie IMB-S3 Guide de l'utilisateur
Installation and Setup Manual
020-102582-01
Christie IMB-S3
NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this
document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary
depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on
information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied
warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection
with the performance or use of this material. Canadian manufacturing facility is ISO 9001 and 14001 certified.
WARRANTY
Products are warranted under Christie’s standard limited warranty, the complete details of which are available by contacting your Christie dealer or Christie. In
addition to the other limitations that may be specified in Christie’s standard limited warranty and, to the extent relevant or applicable to your product, the
warranty does not cover:
a. Problems or damage occurring during shipment, in either direction.
b. Problems or damage caused by combination of a product with non-Christie equipment, such as distribution systems, cameras, DVD players, etc., or use
of a product with any non-Christie interface device.
c. Problems or damage caused by misuse, improper power source, accident, fire, flood, lightning, earthquake, or other natural disaster.
d. Problems or damage caused by improper installation/alignment, or by equipment modification, if by other than Christie service personnel or a Christie
authorized repair service provider.
e. Problems or damage caused by use of a product on a motion platform or other movable device where such product has not been designed, modified or
approved by Christie for such use.
f. Except where the product is designed for outdoor use, problems or damage caused by use of the product outdoors unless such product is protected from
precipitation or other adverse weather or environmental conditions and the ambient temperature is within the recommended ambient temperature set
forth in the specifications for such product.
g. Defects caused by normal wear and tear or otherwise due to normal aging of a product.
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold
by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or
(ii) the required international warranty fee has been paid.
The warranty does not obligate Christie to provide any on site warranty service at the product site location.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in
accordance with the maintenance schedule specified by Christie, will void the warranty. For preventative maintenance schedules, refer to
www.christiedigital.com.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at the user’s own expense.
CAN ICES-3 (A) / NMB-3 (A)
이 기기는 업무용(A급)으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
ENVIRONMENTAL
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical
and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according
to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the
environment we live in!
Content
Safety precautions.................................................5
General safety precautions............................................. 5
Introduction...................................................... 6
Key features...................................................... 6
Prerequisites......................................................6
Christie IMB connectors............................................... 7
Sample network topology..............................................8
IP and subnet considerations............................................9
Installing and configuring...........................................10
Installing the Christie IMB.............................................10
Activating marriage.................................................12
Connect the projector to network attached storage..............................13
Configuring audio settings.............................................13
Enabling Dolby Atmos..............................................13
Configuring multiple projectors..........................................14
Synchronizing content on multiple projectors........................... 16
Content replication network topology......................................17
Connecting the hardware..............................................18
Setting the secondary NAS Ethernet port IP address.............................18
Enabling content synchronization.........................................19
Viewing synchronization progress........................................ 19
Viewing the Christie NAS status..........................................19
Enhancements and Licensing........................................20
Identifying the Christie IMB electronic serial number.............................20
Importing a product enhancement........................................20
Enabling an enhancement.............................................20
Playing content...................................................21
Specifications....................................................22
Physical specifications................................................22
Christie IMB-S3 Installation and Setup Manual 3
020-102582-01 Rev. 1 (06-2017)
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.
Power specifications.................................................22
Environmental specifications............................................22
Compatible cinema formats - 2D video.....................................23
Compatible cinema formats - 3D video.....................................23
MPEG-2 MXF Interop supported formats.................................... 24
Supported audio formats..............................................24
Supported NAS devices...............................................24
AES3 port pin map..................................................25
Control signal compatibility............................................ 25
Regulatory.......................................................26
Safety....................................................... 26
Electro-magnetic compatibility........................................ 26
Environmental.................................................. 26
Security policy.................................................. 26
Anti-tampering circuitry............................................ 27
Content
Christie IMB-S3 Installation and Setup Manual 4
020-102582-01 Rev. 1 (06-2017)
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.
Safety precautions
Learn about the safety precautions related to the Christie IMB.
General safety precautions
Read all safety and warning guidelines before installing or operating the product.
Hazard warnings also apply to accessories once they are installed in a Christie product that is
connected to power.
Warning! If not avoided, the following could result in death or serious injury.
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• EXPLOSION HAZARD! Allow sufficient time for the lamp to cool down before powering down the
product, disconnecting it from AC, and opening the lamp door.
Caution! If not avoided, the following could result in minor or moderate injury.
• Only Christie qualified technicians are permitted to open product enclosures.
• Observe all electrostatic precautions. Use a grounded wrist strap and insulated tools when
handling, servicing, or cleaning electronic assemblies.
Christie IMB-S3 Installation and Setup Manual 5
020-102582-01 Rev. 1 (06-2017)
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.
Introduction
This manual provides installation and setup instructions for the Christie IMB-S3.
Key features
With this release of the Christie Integrated Media Block (IMB), you can connect a network attached
storage (NAS) device to play content.
The NAS device must be connected to the gigabit Ethernet port labeled NAS on the main projector
communication board. Content cannot be stored on the Christie IMB; all content must be stored on a
NAS device.
The Christie IMB meets Digital Cinema Initiatives, LLC (DCI) specifications and is compatible with
Christie Series 3 projectors.
Prerequisites
To install the Christie IMB into your theater environment, the following items are required.
• A Christie CineLife Series 3 projector with firmware 2.1.0-1 or later installed. If you do not
have CineLife firmware 2.1.0-1 or later installed, you should install the IMB in the projector
before running the firmware upgrade.
• A network attached storage (NAS) device with the hard drives installed and properly
configured. The NAS device must meet the following minimum requirements:
• 1 TB of storage space or greater
• RAID 5 capable
• Gigabit Ethernet connectivity for NAS devices
• Network file system (NFS) for NAS devices
• An AES connector for dual RJ45 ethernet ports, connecting your cinema audio processor to the
Christie IMB audio output. See AES3 port pin map (on page 25).
Christie IMB-S3 Installation and Setup Manual 6
020-102582-01 Rev. 1 (06-2017)
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.
Christie IMB connectors
Learn about the connection ports available on the Christie IMB.
Feature Description
A AES3 port for digital audio output
B LTC output for encoded SMPTE time code data (LTC OUT)
C Output for multi-projector playback (SYNC OUT)
D Input for multi-projector playback (GEN LOCK)
E SM Run status indicator
The LED flashes green when the security manager (SM) is operating correctly.
F FIPS (Federal Information Processing Standards Publications) status indicator
The LED is green when FIPS security status is operating correctly.
If the LED is red, an error has occurred. Restart the IMB. If the LED remains red, return the product
to Christie Digital Systems USA Inc.
Introduction
Christie IMB-S3 Installation and Setup Manual 7
020-102582-01 Rev. 1 (06-2017)
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.
Sample network topology
This diagram illustrates a typical network topology for the Christie IMB.
Device Description
A Digital cinema audio processor
B Network attached storage (NAS)
C Theater management system (TMS)
D Switch
E Christie ACT automation device
F Laptop
G Theater network
H Ingest hard drive
Introduction
Christie IMB-S3 Installation and Setup Manual 8
020-102582-01 Rev. 1 (06-2017)
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.
IP and subnet considerations
To ensure the Christie IMB can operate, you must configure your network settings correctly. Incorrect
subnet settings can cause communication issues between the Christie IMB, the network attached
storage (NAS) device, and external automation devices.
To reduce the risk of communication issues:
• Assign the projector Management, NAS, and Media networks to non-conflicting subnets. For
example:
Netmask 255.255.255.0
Management 192.168.3.100
NAS 192.168.1.10
Media 192.168.2.1
• Configure the Media ports on the Christie IMB faceplate to use dynamic host configuration
protocol (DHCP) when they are not in use. When you set DHCP on a NAS port and nothing is
connected to the port, the Christie IMB does not mount the port and there is no risk of an IP
address conflict.
• Use static IP addresses on the Management, NAS, and Media ports when they are in use.
Introduction
Christie IMB-S3 Installation and Setup Manual 9
020-102582-01 Rev. 1 (06-2017)
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.
Installing and
configuring
Learn how to install and configure the Christie IMB-S3.
Installing the Christie IMB
The Christie IMB is installed in the card cage located on the side of the projector.
Marriage permissions are required to activate marriage.
Caution! If not avoided, the following could result in minor or moderate injury.
• Observe all electrostatic precautions. Use a grounded wrist strap and insulated tools when
handling, servicing, or cleaning electronic assemblies.
To prevent damage by static electricity, keep the Christie IMB in its anti-static package until you install
it.
1. Turn the lamp off and allow the projector to cool a minimum of 15 minutes.
2. Disconnect the projector from AC power.
3. Remove the top cover.
a) Unlock the cover with the low security key.
b) Remove the cover and set it aside.
4. Remove the high security cover.
a) Unlock the high security cover with the high security key.
b) Remove the cover and set it aside.
Christie IMB-S3 Installation and Setup Manual 10
020-102582-01 Rev. 1 (06-2017)
Copyright © 2017 Christie Digital Systems USA Inc. All rights reserved.
Autres manuels pour IMB-S3
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Christie Système de cinéma maison
