Christ Elektronik Touch-it CE Pico-ITX Manuel utilisateur

Touch-it CE Pico-ITX

Operating Instructions

Christ-Elektronik GmbH 1/ 56 [email protected]

www.christ-elektronik.de Tel.: +49 8331 8371-0

Touch-it CE Pico-ITX

Touch-it CE Pico-ITX glass

Easy Integration

Touch Interface

Wide Input Voltage

Baseboard with CPU Module

Touch-it CE Pico-ITX

Operating Instructions

Christ-Elektronik GmbH 2/ 56 [email protected]

www.christ-elektronik.de Tel.: +49 8331 8371-0

Document No.

E461133

Revision

Date

19 May. 15

Address

Christ-Elektronik GmbH

Alpenstraße 34

DE-87700 Memmingen

Telephone

+49 (0)8331 8371 –0

Fax

+49 (0)8331 8371 –99

E-Mail

[email protected]

Internet

http://www.christ-elektronik.de

No part of this documentation may in any form be reproduced, copied or

distributed by means of electronic systems without previous written permis-

sion by Christ-Elektronik GmbH. The translation into another language also

requires a written permission. This documentation may be exclusively en-

trusted to the owner of the installation or to the employees of Christ-

Elektronik GmbH.

Technical chang-

Christ-Elektronik GmbH reserves the right to change specifications, execu-

tions and technical data held within this document without prior notice.

Trademarks

Brand and product names are trademarks or registered trademarks of their

respective owners.

Touch-it CE Pico-ITX

Operating Instructions

Christ-Elektronik GmbH 3/ 56 [email protected]

www.christ-elektronik.de Tel.: +49 8331 8371-0

INDEX

1General..............................................................................................................................................5

2Commissioning ................................................................................................................................7

2.1 Content....................................................................................................................................................... 7

2.2 Interfaces Connector Side ......................................................................................................................... 8

2.3 Interfaces On Board .................................................................................................................................. 8

2.4 Quick Start Guide...................................................................................................................................... 9

2.4.1 Cables and thermal pad ........................................................................................................9

2.4.2 Touch-it CE Pico-ITX 7 ..........................................................................................................11

2.4.3 Touch-it CE Pico-ITX 10,4 .....................................................................................................12

2.4.4 Touch-it CE Pico-ITX 15 ........................................................................................................13

3Software .........................................................................................................................................14

3.1 Microsoft Windows Mobile Device Center / Active Sync..................................................................... 14

3.2 General Information ................................................................................................................................ 16

3.2.1 Exploring the different interfaces that Windows CE offers .........................................................16

3.2.2 PC Connectivity over Ethernet ...............................................................................................17

3.2.3 Compilation / Debugging ....................................................................................................18

3.3 Flash Memory Layout............................................................................................................................... 20

3.4 Permanent Storage .................................................................................................................................. 21

3.4.1 Flash Disk ..........................................................................................................................22

3.4.2 MicroSD Card ....................................................................................................................22

3.4.3 USB HD .............................................................................................................................22

3.5 Registry .................................................................................................................................................... 23

3.6 Windows CE 6.0/ EC 7 Bootloader & Image Update.......................................................................... 24

3.6.1 Image Update via external memory (USB, SD).........................................................................24

3.7 Running Applications at Startup (Autorun) ............................................................................................. 25

3.8 Adding Files to Desktop or Start Menu (AutoCopy)............................................................................... 25

3.9 Touch-it CE Remote Control..................................................................................................................... 26

4Embedded Kits...............................................................................................................................28

4.1 Dimensions Pico-ITX ................................................................................................................................. 28

4.2 Touch-it CE Pico-ITX 7.............................................................................................................................. 29

4.3 Touch-it CE Pico-ITX glass 7 .................................................................................................................... 31

4.4 Touch-it CE Pico-ITX 10,4 ........................................................................................................................ 33

4.5 Touch-it CE Pico-ITX glass 10,4............................................................................................................... 35

4.6 Touch-it CE Pico-ITX 15............................................................................................................................ 37

4.7 Touch-it CE Pico-ITX glass 15 .................................................................................................................. 39

5Interfaces ........................................................................................................................................41

5.1 Interfaces Top View ................................................................................................................................. 41

5.2 Interfaces Bottom View ............................................................................................................................ 42

5.3 Interface Listing ........................................................................................................................................ 43

5.3.1 Power Supply Connector (X1) ...............................................................................................43

5.3.2 Colibri Sodimm Connector (X2).............................................................................................43

5.3.3 USB Intern (X3) ...................................................................................................................44

5.3.4 USB Type A Extern (X4) ......................................................................................................44

5.3.5 USB Mini Type B Extern (X5).................................................................................................45

Touch-it CE Pico-ITX

Operating Instructions

Christ-Elektronik GmbH 4/ 56 [email protected]

www.christ-elektronik.de Tel.: +49 8331 8371-0

5.3.6 Ethernet Connector (X6) .......................................................................................................45

5.3.7 RS-232 Connector (X7) ........................................................................................................46

5.3.8 RS-232/RS-485 Connector (X8) ............................................................................................46

5.3.9 MircoSD (X9)......................................................................................................................47

5.3.10 LVDS Connector (X10) .........................................................................................................47

5.3.11 Touch Connector1 (X11) ......................................................................................................48

5.3.12 Backlight Connector (X12)....................................................................................................48

5.3.13 LED Backlight Connector (X13)..............................................................................................49

5.3.14 SPI Connector (X14) ............................................................................................................49

5.3.15 Audio Connector (X15) ........................................................................................................50

5.3.16 I/O Connector (X16) ...........................................................................................................50

5.3.17 Touch Connector2 (X17) ......................................................................................................51

5.3.18 RTC Battery (BAT)................................................................................................................51

6Pointers .......................................................................................................................................... 52

6.1 Used symbols........................................................................................................................................... 52

6.2 General pointers...................................................................................................................................... 52

6.3 Safety pointers ......................................................................................................................................... 53

6.4 Maintenance plan ................................................................................................................................... 55

6.5 Repairs ..................................................................................................................................................... 55

6.6 Cleaning .................................................................................................................................................. 55

Touch-it CE Pico-ITX

Operating Instructions

Christ-Elektronik GmbH 5/ 56 [email protected]

www.christ-elektronik.de Tel.: +49 8331 8371-0

1 General

OVERVIEW

Series

Touch-it CE Pico-ITX

Touch-it CE Pico-ITX glass

Touch

Foil Touch, analog resistive

Projected Capacitive Touch

Sizes

7” (17.8 cm)

10.4” (26.4 cm)

15” (38.1 cm)

SYSTEM

CPU

NVIDIA® Tegra™ 2 Dual Core 1.0 GHz Cortex-A9

Graphic

Integrated Ultra-low power NVIDIA GeForce GPU

Video Decoder

H.264, WMV9 VC-1, MPEG-4, MPEG-2, H.263, DiVX, XviD

Memory

256 MB DDR2 RAM

512 MB DDR2 RAM (optional)

Storage

512 MB NAND FLASH

1 GB NAND FLASH (optional)

Operating System

Windows Embedded Compact 7 Pro

Linux (optional)

POWER SUPPLY

Supply Voltage

10 –28 VDC

Power Consumption

(no Display)

3 W

Power Consumption

(with Display)

7 inch 7 W

10.4 inch 8 W

15 inch 13 W

Touch-it CE Pico-ITX

Operating Instructions

Christ-Elektronik GmbH 6/ 56 [email protected]

www.christ-elektronik.de Tel.: +49 8331 8371-0

MECHANICAL & ENVIRONMENTAL

Dimensions Board

100 mm x 72 mm (Pico-ITX)

Maximum Height Top

14 mm

Maximum Height Bottom

3.2 mm

Height Platine

1.6 mm

Dimensions LCD and Touch

(Foil Touch)

7 inch, 166 mm x 106.5 mm x 11.6 mm

10.4 inch, 236 mm x 176.9 mm x 7.9 mm

15 inch, 326.5 mm x 253.5 mm x 12.6 mm

Dimensions LCD and Touch

(Projected Capacitive

Touch)

7 inch, 186.5 mm x 125.5 mm x 12.7 mm

10.4 inch, 259.2 mm x 206.4 mm x 9 mm

15 inch, 362.8 mm x 286.8 mm x 13 mm

Operating Temperature

0°C ~ +60°C (only 15 inch version)

0°C ~ +65°C (7 /10.4 inch)

-20°C ~ +65°C (7 / 10.4 inch optional)

Humidity

5 ~ 80% (non condensing)

Certification

CE, EN55022, EN55024, DIN EN ISO 9001

Touch-it CE Pico-ITX

Operating Instructions

Christ-Elektronik GmbH 7/ 56 [email protected]

www.christ-elektronik.de Tel.: +49 8331 8371-0

2 Commissioning

2.1Content

Display & Touch

Pico-ITX Board & CPU Module

Visualized your system with an industrial

LCD. A Projected Capacitive Touch / Foil

Touch is mounted

Pico-ITX and its interfaces

with the suitable CPU Module

Backlight Inverter

(only 15”)

Power Plug

Converts the Backlight Signals of the

Pico-ITX into the Display Signals

Other versions included the Inverter

on the Pico-ITX Board

Phoenix MC 1,5/3-ST-3,5 BK

is used as power plug

Cables

All required cables are included

Touch-it CE Pico-ITX

Operating Instructions

Christ-Elektronik GmbH 8/ 56 [email protected]

www.christ-elektronik.de Tel.: +49 8331 8371-0

2.2Interfaces Connector Side

USB

1 x USB Host (Type A)

1 x Mini USB OTG (Type B)

LAN

1 x 100Mbit Ethernet

Communication

1 x RS-232 and 1 x RS-485

(one connector)

Mass Storage

1x microSD up to 32GB

Power Connector

Phoenix

Picture 1: connector side Touch-it CE Pico-ITX

2.3Interfaces On Board

Video

1 x 18bit LVDS single channel

1 x LED Backlight Connector

Audio

1 x Line In, Line Out, Mic In

Real Time Clock

Yes

USB

1 x USB Host Type A

(shared with external mini USB OTG Type B)

Communication

1 x UART, 1 x SPI

4 x GPIOs, 1 x ADC

Touch

Foil Touch, analog resistive (4 / 5 wire)

All interfaces are described in the chapter Interfaces.

Touch-it CE Pico-ITX

Operating Instructions

Christ-Elektronik GmbH 9/ 56 [email protected]

www.christ-elektronik.de Tel.: +49 8331 8371-0

2.4 Quick Start Guide

The following table and pictures give you an overview how to configure the Touch-it CE Pico-ITX

components.

2.4.1 Cables and thermal pad

LVDS Cable

Backlight Cable (only 7” and

10.4”)

Inverter Cable (only 15”)

Backlight Cable (only 15”)

Thermal Pad (only 15”)

Touch Cable

Touch Cable (glass)

Touch-it CE Pico-ITX

Operating Instructions

Christ-Elektronik GmbH 10 / 56 [email protected]

www.christ-elektronik.de Tel.: +49 8331 8371-0

2.4.2 Touch-it CE Pico-ITX glass

Follow the instructions below except of the touch cable.

Hereto connect the touch cable (glass) to X3 and the touch port of the display.

Touch Connector 7“

Touch Connector 10,4“and 15“

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Christ Elektronik Écran tactile

Christ Elektronik

Christ Elektronik Touch-it CE Manuel utilisateur

Christ Elektronik

Christ Elektronik Touch-it XPC Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur