Chowmain Sainsmart iMatic v2 Driver Manuel utilisateur

Sainsmart iMatic v2 Driver

Installation and Usage Guide

Revision: 3.0

Date: Monday, July 10, 2017

Authors: Alan Chow

Page | 2

Contents

Overview ................................................................................................................................................................................. 2

Features .................................................................................................................................................................................. 2

Change Log.............................................................................................................................................................................. 3

SainSmart iMatic V2 Device Setup.......................................................................................................................................... 3

Driver Installation.................................................................................................................................................................... 3

Adding the driver to your project ........................................................................................................................................... 4

Licencing.................................................................................................................................................................................. 7

Summary ............................................................................................................................................................................. 7

STEP 1 - Creating your project on driverCentral ................................................................................................................. 7

STEP 2 –Purchase driver licence ......................................................................................................................................... 9

STEP 3 –Install and activate the driverCentral cloud driver.............................................................................................10

STEP 4 –Install Chowmain driver...................................................................................................................................... 11

Overview

The SainSmart iMatic V2 provides 8 x 250V/AC 10A Relays channels that is controlled over ethernet TCP/IP.

This unit is extremely affordable, is powered via a local 12vdc supply and is also din mountable. Other

integrated solutions cost anywhere from 3 times to 10 times more. This is by far the cheapest way to integrate

relays into Control4.

Features

IP Controllable

On/Off/Toggle/Pulse Relays

Two way feedback

Fast Switching - Commands fire in 100ms intervals

Extremely Affordable

Combine with Chowmain Relay to Light driver for lighting control.

Page | 3

Change Log

FEB 29 2016 –Initial Release

SainSmart iMatic V2 Device Setup

There are a few quirks of the unit due to the poor web interface design. It is extremely reliable as long as you

follow these notes

The iMatic V2 cannot obtain an IP Address via DHCP. You will need to set the IP address of the unit

manually.

The default IP address of the unit is 192.168.1.4. To access the web interface visit

http://192.168.1.4/30000.

If you change the ip address and/or 'port' then this will change to http://ipaddress/port.

If you access the Change IP/Port page make sure you complete the port change as this stops control of

the unit. Take note that the port is not an actual port number but a folder name.

Driver Installation

1. The driver you have downloaded will be in a zip file. Double click on this file to open it in your preferred zip

program (WinZip, WinRar, etc.).

2. Extract the c4i file to the My Documents\Control4\Drivers directory. If you are using Windows 7 or 8 this will be

extracted to the Libraries\Documents\Control4\Drivers directory.

3. You are now ready to add and configure the driver via the Composer Pro software.

Page | 4

Adding the driver to your project

IMPORTANT –Before undertaking the installation of the driver please follow the licencing steps outlined at the end of

this document.

1. Launch the Composer Pro application and connect to your project

2. In the ‘System Design’ page select the ‘Search’tab on the right hand side.

3. Type in ‘Sainsmart’in the search window and press the ‘Enter’ key

4. Double click on the ‘SainSmart iMatch V2’ driver to add it to your project

5. Highlight the ‘SainSmart iMatch V2’ driver on the left hand side.

6. Enter in the IP Address of the unit and press set

7. If you have changed the Port Number (you shouldn’t ever need to) then change the port and press set

8. Click on My Drivers on the right hand side.

Page | 5

9. Under Motorisation double click on the device type you want to use (note this will be the icon for your device).

10. In the motorised device properties set the type (Hold or Pulse).

11. Repeat steps 10 and 11 for each device connected

12. Click on the Connections tab.

13. Highlight the driver on the left hand side.

Page | 6

14. Bind the relay ports to the devices you want control over.

15. Click on the File and Refresh Navigators. Congratulations you have set up the iMatic v2.

Page | 7

Licencing

Chowmain drivers require a valid licence to use the driver. Drivers can be purchased from our distributor driverCentral

however all Chowmain drivers come with a 7 day trial. We recommend that prior to purchasing a driver that you test

the driver out to ensure that it will work with your hardware and will meet your requirements. The licencing procedure

is broken down into 4 steps. A summary of the steps are below along however we have also provided detailed steps if

the summary is not sufficient.

Summary

1. Create your project on the driverCentral.io website (This will generate a specific token which you will

use in the next step)

2. Download, install and activate the driverCentral cloud driver in your project (Only once per project. Use

the token generated in step 1)

3. (Optional) To try a driver, simply download it and install it in your project

4. To purchase a driver:

a. On driverCentral, purchase a license and register it to your project

b. If the driver is not already installed in your project, download it and install it

c. If necessary, use the cloud driver’s Action: “Check Drivers” to force licence download to the

project.

STEP 1 - Creating your project on driverCentral

1. Visit http://www.drivercentral.io

2. Log into your driver Central dealer account.

3. Visit the Project Portal

4. Click on Create Project

Page | 8

5. It will prompt you for a project name. Type in a meaningful name for your customer’s project

6. Click on Create Project

7. Click on the project we just created to expand the project

8. Take note of the Project Token as this will be used in STEP 3 when we install the driverCentral cloud driver.

Page | 9

STEP 2 –Purchase driver licence

1. Visit https://www.drivercentral.io/chowmain-ltd/ and find the product/driver you want to purchase a licence

for.

2. Click on the Add to Cart button

3. Click on the Shopping Cart icon in the top right corner and click on View cart

4. Confirm that your order is correct and click on Proceed to checkout

5. Follow the prompts and click on Sib,ot ,u Prder

6. This will take you to PayPal for payment.

7. Pay via PayPal. It will automatically return to the marketplace when confirmed.

8. You will now be at a page where you can see your purchased licence.

Page | 10

9. From here assign the licence to the project we created or if you did not follow that step create a new project

STEP 3 –Install and activate the driverCentral cloud driver

NOTE: Only one instance of the driverCentral cloud driver installed per project. Do not install additional cloud drivers.

1. Visit http://www.drivercentral.io

2. Log into your driver Central dealer account.

3. Visit the Project Portal

4. Click on Download Cloud Driver

5. Copy the C4Z driver to My Documents\Control4\Drivers directory.

6. Add the driver to your project.

Table des matières

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation

chowmain Sainsmart iMatic v2 Driver Manuel utilisateur

Manuels Télécommande populaires d'autres marques