CHINT ASTRONERGY Al-40 Series Manuel utilisateur
MOUNTING SYSTEM
INSTALLATION
1. Tile on-roof mounting system(Al-40 series) installation
1.1 Overview
1.2 Drawing
1.3 Components
1.4 Installation steps
2. Corrugated metal sheet roof mounting system
(Al-40 series) installation
2.1 Overview
2.2 Drawing
2.3 Components
2.4 Installation steps
3. Aluminum56 mounting system installation
4. After-sale service warranty
Contents
2
1 Tile on-roof mounting system
(Al-40 series) installation
1.1 Overview
Module: CHSM6610P-250W(40mm)
Arrangement: 1*4
Tilt angle: follow the roof-top
A: Aluminum rail
Used for installing module
B
A
C
3
B: End clamp/Middle clamp
Used for xing module
C: Roof hook
Used for connecting alumnium rail and roof rafter
1.2 Drawing
4
1.3 Components
(1) Roof hook (2) End clamp
(3) Middle clamp (4) Aluminum rail
(5 )M8x90 T-splice bar (6) M8*25 T-head bolt+ange nut
(7) Wood screw
5
1.4 Installation steps
(1) Fix the roof hook to the roof rafter with M8 wood screw
(2) Place the roof hook on the roof as the picture below, the distance between front and back is 1020mm,
and between right and left is 1400mm
(3) Put the aluminum rail on the roof hook
Put the T-head bolt in the notch of the aluminum rail and through the hole of the roof hook,then x it
securely with ange nut
Roof
Tile
Wood
Rafter
Aluminum
1400mm
Roof hook
1020mm
6
(4) Connecting the two aluminum rail with T-splice bar and M8*10 inner ange bolt
(5) Put the module on the aluminum rail and xed with end clamp and middle clamp
Aluminum
Roof hook
T-head
Flange
Aluminum rail
T-splice bar
End
Module
Middle clamp
7
(6) Installation of clamp: put the T-head bolt in the notch of the aluminum rail with M8 inner ange bolt connected and
xed securely
End clamp xing Middle clamp xing
(7) Installing all the modules as 3.6 till complete.
Module
Clamp
8
2 Corrugated metal sheet roof mount-
ing system(Al-40 series) installation
2.1 Overview
Module: CHSM6610P-250W(40mm)
Arrangement: 1*4
Tilt angle: follow the roof-top
BA
C
A: Aluminum rail
Used for installing module
B: End clamp/Middle clamp
Used for xing module
C: M10X200 hanger bolt+ EPDM
Used for connecting aluminum rail
and metal roof
9
2.2 Drawing
2.3 Components
(1) M10X200 hanger bolt+ EPDM (2) End clamp
Table des matières
Autres manuels CHINT Panneau solaire
