chinavasion TK800 Manuel utilisateur
TK800
Quick start guide
Start here
Thanks for choose our product. This Quick Start guide
tells you how to set up your GPS Tracker.
Connect the GSM and GPS antenna as following
picture ，and put the antenna outside。
Put the SIM card in right way, connect the wires
and hand set
When the blue light turn to flashing ,the unit is
finish start 。
Confirm your SIM card have calling, send SMS
and GPRS function.
Confirm your SIM card have enough balance
(money)
Confirm your SIM card can show caller ID and
don’t open call forwarding function
This device have three way to operate it：by hand set、
by SMS and internet。Here only introduce how to
operate it by SMS；For how to operate it by hand set
and internet , please refer to the CD ,that will coming
with the unit .
How to connect the wires.
Connection.
⒈Red wire connect with positive electrode of
car ‘s batter +12v，
⒉Black, GND
⒊Yellow wire connect the relay(balckwire10)
⒋ACC :the car fire point
⒌Blue wire door magnetic inspection
⒍Gray wire connect the horn
⒎Orange wire car door motor
⒏Black and red double wire is indicate light
⒐Cord wire is SOS button
⒑The black wire of relay is connect yellow wire 3
⒒The red wire of relay connect with positive
electrode +12v
12 Connect car oil pump power line
13 Connect car oil pump power lien
how to connect the relay.
Set APN.
Send SMS” <C008,cmnet>”to unit, will reply:”
<CR08,cmnet>”,After set up APN,IP, port, unit will
send the data to platform every 30 seconds
automatically.
IP and port.
Send”<C009,0,119.147.23.100,2337,cmnet,1363262*
***>”to unit. Notice: 009=number of command,0=
format of TCP (change 1 if it is UDP),
119.147.23.100=IP, 2337=port, 1363262****=sim
card number in unit, and this number is the
identification code of the platform.
Internet platform.
Please contact franchiser. They will supply you
platform website, User name, Password and help you
to add your unit into platform.
You can check more information about platform in
CD-ROM
Cut oil and power.
Send SMS”<C005,111> ”to unit, will reply”
<CR05,111>”,will cut oil and power. Send
“<C005,000>”to unit, will reply”<CR05,000>”,
will connect oil and power.
Open/lock door.
Send SMS”<C00D,000>” to unit, will reply
“<CR0D,000>”, will open door.
Send”<C00D,111>” to unit, will reply
“<CR0D,111>”, will lock door.
Monitor.
Send SMS ” <C004,136326***,136326***>” to unit，
it will receive a call from the unit，This function is the
one way communication of hand set and the
telephone receiver is close .Notice：The monitor
number should be the same before and after, the
<>and the capital letter C when edit the SMS .
Table des matières
Autres manuels chinavasion GPS
chinavasion
chinavasion CVAAW-G565 Manuel utilisateur
chinavasion
chinavasion CVUG-TR42 Manuel utilisateur
chinavasion
chinavasion CVUW-TR43 Manuel utilisateur
chinavasion
chinavasion CVUK-TR21 Manuel utilisateur
chinavasion
chinavasion CVPL-G417 Manuel utilisateur
chinavasion
chinavasion GPS 84H-3 Manuel utilisateur
