•Close the door, the oven will turn back to Ready Mode. If press " "
button during setting process, the oven turn to Door Open Mode. The
program that not saved will be lost. If there is program saved as
memory procedure, press the related number button, the saved
program will start. If no saved program, the buzzer will alarm when
pressing number button and it will not work.
For example: set the program as memory cooking.
Program: Power level PL7 and cooking time 1 minute and 25 seconds.
Step 1: In ready state, press number button "1" for 5 seconds,"ProG"
displays.
Step 2: Press number button "3", the program will be saved in "3".
Step 3: Press number buttons "1", "2" and "5" to input the cooking time.
Step 4: Press " " button," PL7" displays. Setting finished.
Step 5: Press " " to save. When use the program next time, just
press "3", the related program will start.
Note:
(1). If the electricity is cut off, the saved program will not lost.
(2). If the program need to reset, just repeat the above steps.
(3). If press " " at the last step, it will turn back to Ready Mode. The setting
will be no use.
12. Double Quantity cooking
•Under ready state, press "X2" button and then press number buttons
0-9 in 5 seconds, the oven will start cooking with the quantity preset
cooking time.
•Press "X2", "doub" displays. When press number buttons, LED will
display the quantity preset time. For example, number button "5" and
its preset time is 1 minute. Then press "X2", then time will change to
1:00*(1+0.8)=1:48.
•When cooking program finish, the oven will enter End of Cook Cycle
Mode.
