Checkme O2 Max Manuel utilisateur
Checkme O2 Max
Smart Wrist Pulse Oximeter
User Manual
User’s Manual
Contents
1. Introduction............................................................................................ 1
2 Using the Monitor................................................................................... 4
3 PC software.............................................................................................8
4 Maintenance............................................................................................9
5 Troubleshooting......................................................................................9
6 Specifications........................................................................................10
7 Electromagnetic Compatibility............................................................11
1
1. Introduction
1.1 Intended Use
This product is intended to be used for measuring,
displaying and storing of pulse oxygen saturation
(SpO2)，pulse rate and motion in home or healthcare
facilities environment. App can show real-time SpO2,
pulse rate; get record, display results and report.
Note:
The data and results provided by this device are for pre-check
screening purpose only and cannot be directly used for diagnostic
or treatment.
The data provided by the APP and PC software (optional) is not
intended for diagnosis or treatment purpose, always consult your
doctor for any health condition.
Warnings and Cautionary Advices
DO NOT squeeze the sensor or apply excessive force on
the sensor & cable.
Do not use this device during MRI examination.
Never submerge the device in water or other liquids. Do
not clean the device with acetone or other volatile solutions.
Do not place this device in pressure vessels or gas
sterilization device.
Consult your doctor immediately if you experience
symptoms that could indicate acute disease.
Do not self-diagnose or self-medicate on the basis of this
device without consulting your doctor. In particular, do not
start taking any new medication or change the type and/or
dosage of any existing medication without prior approval.
Use only cables, sensors and other accessories specified
2
in this manual.
Prolonged continuous SpO2monitoring may increase the
risk of undesirable changes in skin characteristics, such as
irritation, reddening, blistering or burns.
Check the SpO2sensor application site every 6-8 hours to
determine the positioning of the sensor and the circulation
and skin sensitivity of the patient. Patient sensitivity varies
depending on medical status or skin condition. For patients
with poor peripheral blood circulation or sensitive skin,
inspect the sensor site more frequently.
Functional tester cannot be used to assess the accuracy of
a SpO2sensor or a device.
This device is designed to determine the arterial oxygen
saturation percentage of functional hemoglobin. Factors
that may degrade pulse oximeter performance or affect the
accuracy of the measurement include the following:
- excess ambient light
- excessive motion
- electrosurgical interference
- blood flow restrictors
(arterial catheters, blood pressure cuffs, infusion lines,
etc.)
- moisture in the sensor
- improperly applied sensor
- incorrect sensor type
- poor pulse quality
- venous pulsations
- anemia or low hemoglobin -concentrations
- cardiogreen and other -intravascular dyes
- carboxyhemoglobin
- methemoglobin
- dysfunctional hemoglobin
3
1.2 Guide to Symbols
1.3 Unpacking
Main Unit × 1
Ring Sensor × 1
Cable × 1
User Manual × 1
Symbol
Description
Type BF-Applied Part
Manufacturer
European authorized representative
CE0197
CE Marking indicating conformance to
EC directive No. 93/42/EEC concerning
medical devices.
MRI unsafe. Presents hazards in all MR
environments as device contains
strongly ferromagnetic materials.
Indicate separate collection for electrical
and electronic equipment (WEEE).
IP22
Protected against spraying water and
against access to hazardous parts with a
tool, per IEC 60529.
Follow Instructions for Use.
Warning and Caution!
SN
Serial number
No alarm system.
4
2 Using the Monitor
2.1 Overview
1. Pulse oximeter
2. Wristband
3. Sensor interface / charging interface
4. Power button
5. SpO2 sensor
Screen display item description:
SpO2
Pulse rate
Wear the sensor
Time
Remaining battery capacity
Alert is on
Alert is off
Bluetooth is connecting
5
2.2 Charging
Charge the battery before using.
Use the charge cable to charge the battery of device in
the USB Port of the computer or with USB charging
adapter.
After being fully charged, the device will power off
automatically.
2.3 POWER ON/OFF
POWER ON:
Press the button for 1 second to turn on the device.
POWER OFF:
Automatically power off: The device will turn off
automatically in 2 minutes if no measurement, no
operation or without App connection.
Manually power off: You can press the button for about
2 seconds to turn off.
2.4 TAKE THE FIRST RECORDING
START. Wear the device and the Ring Sensor, press
the button to power on. And keep yourself in the quiet
environment.
(For the sake of clarity, recommended the user wear the
monitor watch on their left wrist and put the ring sensor
on the thumb. If it is too tight, try another finger.
Avoid being loose.)
6
STOP. After the record, take off the Ring Sensor (and
the device), the recording will be
save after the countdown. (If the
working time is less than 1 minute,
the data will not be saved.)
Note:
Please avoid excessive motion for the sensed
finger during recording and avoid any strong
ambient light condition.
2.5 Stop monitoring & sync data
Take off the sensor, the countdown
will begin.
During the countdown, if you wear
the sensor again, the record will be
resumed.
After the countdown, the data will be ready for sync.
Note:
The duration of the recording is 1mins~10 hours. And
the device can collect and store maximum 4 recording,
when the 5th recording coming, the first recording will
be will covered.
Sync data to the ViHealth App
You can Sync the data to your app after
the countdown or next time after you
turn on the device.
Note: Refer the ViHealth app manual for more details.
2.5.1 How to find the Serial Number？
1）Detach the main unit from wristband.
2）Flip the main unit over, the series number is
printed on the label of product.
7
Note:
The serial number is on the back of the device.
2.6 How to synchronize the time of the device
The time of the monitor will be automatically
synchronized with the network time on your smart
device after connected with the app.
Note: Refer the ViHealth app manual for more details.
2.7 Alert
When the monitor detects low blood oxygen or
abnormal pulse rate, it supports triggering vibration
reminders or sound reminders.
You can customize the vibration reminder after the
monitor power on, or use the App to configure the
vibration intensity.
The sound reminder only can be configured on the App.
2.8 Download App
App name: ViHealth
iOS: App Store
Android: Google Play
8
Compatibility
The device is compatible with iOS versions 9.0+ and
Android versions 5.0+. Refer the ViHealth app manual
for more details.
2.9 Bluetooth Connection
The device Bluetooth will be enabled automatically
when the device is on.
Note: DO NOT PAIR in the settings of your smart
device.
3 PC software
3.1 Download the PC Software
PC Software: O2 Insight Pro
Download from: www.viatomtech.com/support
Install the software on Windows PC or Mac.
3.2 How to connect the monitor to PC
1. Turn on device, connect the device to PC USB
port with the supplied Cable of data.
2. Open the PC software, download data from the
device.
3. With the optional PC software,You can view and
print report, which can also be exported as PDF or
CSV files.
3.3 How to connect the monitor to Mac
1. Turn on device, and turn on the Bluetooth of the
Mac.
Table des matières
Manuels Produit de soins personnels populaires d'autres marques
HiB
HiB Spectre 50 Manuel utilisateur
Carex
Carex SunLite Manuel utilisateur
Roper Rhodes
Roper Rhodes Intense Manuel de la liste des pièces
Interacoustics
Interacoustics Titan IMP440 Instructions d'utilisation et de sécurité
ReTrak
ReTrak VS001 Manuel utilisateur
LED Technologies
LED Technologies dpl PAIN RELIEF Joint Wrap Manuel utilisateur
