CHAOS Nitro Pro 600 Manuel utilisateur

We thank you for purchasing R.C. Aerodyne products!

We incorporate the nest machining and technology available to bring

you enjoyable and worry free ight. Please read this manual carefully

and keep it for future reference for maintenance, adjustment and parts.

Thank you for purchasing R.C. Aerodyne products!

The Model (Insert) is a full featured R/C Helicopter fully capable of all forms of rotary ight. Please read this manual

carefully prior to assembling the unit. Be sure to pay close attention to all safety precautions, warnings

and recommendations contained in this manual. Failure to follow the appropriate warnings can

result in serious injury.

Failure to follow the warnings may result in damage to your unit as well as serious injury to

yourself and others.

Failure to follow the warnings may result in damage to your unit as well as serious danger to

yourself and others.

Never attempt this under any circumstances!

R.C. Helicopters are not to be treated as toys. Although every effort is made to provide a superior and dependable

product, improper use can cause serious injury and death. Be sure to read this manual carefully, paying close

attention to all warnings, precautions and recommendations. You should insure your personal safety and that of

others when operating R.C. Helicopters.

R.C. Aerodyne and the manufacturer assume no liability for the assembly, maintenance and operation of this

product.

This product is intended for use only by adults having extensive experience ying remote controlled helicopters.

You should y this product only at legal ying elds, away from homes, other people and trafc.

We strongly recommend that you obtain liability insurance for this product. One source for such insurance is thru

(Check with Cliff. There is a ying assoc. which provides this.)

Helicopter ying requires a degree of skill. Accidents, modications or damage during ight are not covered by any

warranty and are solely the pilots responsibiltity. Parts and service can, of course, be obtained thru R.C. Aerodyne

or our authorized service centers.

When ying for the rst time or if you are an inexperienced yer, we strongly recommend you obtain assistance

from an experienced pilot. Finding an experienced person to help you in assembly, set up and ying is the best

way to insure a satisfying and safe ying experience.

You are responsible for your actions!

Never fly this product near populated areas, homes, schools or near crowds. This product is not a toy and

can cause serious injury or death. We recommend flying only on approved, legal flying fields. It is strongly

recommended that you purchase liability insurance. Such insurance is available thru (See Cliff).

Rotating blades and high speed combine to make R.C. Helicopter ying dangerous. You

must take every precaution to insure your safety and the safety of those around you.

- Fly only on legal ying elds.

- Do not y near buildings.

- Do not y near crowds.

- Stay away from power lines.

- Fly only in areas without obstacles.

- Never y near, buzz or approach observers or others.

R/C Models container many electrical parts which can be affected by moisture and

other contaminants. Never y your units in rain, snow, darkness or any other type

of adverse conditions. Moisture in any form can cause failures in motors, servors,

transmitters, receivers and other components which can cause a loss of control,

crash and damage to your helicopter as well as injury to others or even death.

Please use only parts supplied thru R.C. Aerodyne so insure proper operation and

safety.

If you are not an experienced pilot, nd one to y with!

Before you begin, be sure that no one else is operating in the area on the same

frequency. Frequency interference can cause you or others to loose control of the

aircraft resulting in crashes and damage to your craft as well as injury or death.

Never operate this helicopter if you are tired, taking medications which may impair

your reactions or ability or under the inuence of alcohol or drugs.

Rotating blades of the helicopter move at a high rate of speed. They are very

dangerous and extreme care must be taken when operating a helicopter. Be

aware of your surrounding and take care not be fly near yourself or others.

Maintain a safe distance between yourself, others, building, power lines and other

obstructions and your helicopter. Once you have landed, you should immediately

turn off your transmitter to avoid causing the blades to rotate accidentally.

R.C. Helicopters are affected by heat and cold.

Store you Helicopter at a stable room temperature to avoid deformation. Never

place your helicopter near a heat source.

Please perfom the following preight examination before each ight:

Insure that there is no one in the ight area using the same frequency.

Insure that batteries are fully charged and ready for ight.

Prior to powering up your transmitter, be sure that the throttle switch is in the lowest position and the “Idle” switch

is off.

On/Off Procedures:

On: Turn the transmitter on rst, then turn on the receiver.

Off: First turn off the receiver, then turn off the transmitter.

Failure to follow this procedure could be hazardous!

Prior to each ight insure that all moving parts are operating smoothly, that the servos are operating properly and

that there are no damaged, chipped or broken gears.

Check for any loose connections, screws, nuts and bolts. Do not y this helicopter if there are any compromised or

damaged parts of loose connections. Secure all connections and replace any damaged parts prior to ight.

Ball links should be check for excess play and should be periodically replaced as needed.The quality and stability

of your ight will be compromised is there is too much play.

Helicopters vibrate. Check all battery connections to insure they have not been loosened in previous ight.

Ball links should be assembled with the “A” character

facing out.

CHAOS

P600NH1A

P600NH2A

When tightening a linkage ball to plastic parts, apply a small amount of CA

glue. Tighten rmly but carefully. Avoid over tightening as this may cause the

threads to strip.

When securing metal parts, apply a

small amount of thread lock.

When securing metal parts, apply a

small amount of thread lock.

P600NH3A

P600NT001

When securing metal parts, apply a

small amount of thread lock.

For stability in 3D ight, use this mounting

position in the SF mixing arm. This is the

recommended position.

For more versatility in 3D flight,

use this mounting position in the

SF mixing arm.

P600NH4A

P600NH5A

When securing metal parts, apply a

small amount of thread lock.

Although this section if

preassembled at the factory,

please check to insure that

all fasteners are secured

with glue.

P600NZ2

P600NZ2A

P600NH2A

When securing metal parts, apply a

small amount of thread lock.

Insure that both sides are of equal length.

P600NB3

P600NB4A

Although this section if

preassembled at the factory,

please check to insure that

all fasteners are secured

with glue.

When securing metal parts, apply a

small amount of thread lock.

Although this section if preassembled at

the factory, please check to insure that all

fasteners are secured with glue.

Manuels Jouet populaires d'autres marques

marklin

marklin 37321 Manuel utilisateur

Canon

Canon PAPER CRAFT Manuel utilisateur

GREAT PLANES

GREAT PLANES Pitts M-12S Manuel utilisateur

NOCH

NOCH 14261 Manuel utilisateur

Hausler

Hausler 450 SE V2 Manuel utilisateur

Dynaflite

Dynaflite Daydream Manuel utilisateur

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuel

Kenner

Kenner Batman 63651 Manuel utilisateur

LEGO

LEGO 8527 Manuel utilisateur

iKarus

iKarus ECO 8 Manuel utilisateur

Multiplex

Multiplex EasyStar II Mode d’emploi

Walkera

Walkera 38 Mode d’emploi

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuel utilisateur

MD MXION SWD Manuel utilisateur

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuel utilisateur

marklin

marklin 39671 Manuel utilisateur

Meccano

Meccano 15103 Manuel utilisateur

LEGO

LEGO TECHNIC 8735 Manuel utilisateur