Channel Master CM-7002 Manuel utilisateur
CM-7002
User Guide
Antenna
Set Top Box
Antenna Set Top Box
Important Safety Instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use the apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8 Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatuses (including ampliers)
that produce heat.
9 Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not t into your outlet,
consult an electrician for replacement of
the obsolete outlet.
10 Protect the power cord from being walked
on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories
specied by the manufacturer.
12 Unplug the apparatus during lightning
Warning and Attention Symbols
You must be aware of safety when you install and use this system. This User Guide provides
various procedures. If you do some of these procedures carelessly, you could injure or kill
yourself or damage equipment or property. Some other procedures require special attention.
The Class II equipment symbol means that the equipment has additional insulation and does not
need to be grounded.
ForYourSafety
Warning: To reduce the risk of re
or electric shock, do not expose this
appliance to rain or moisture.
Alternating Current (AC)
Direct Current (DC)
Indoor Use only
USB Connector
i
User Guide
Important Safety Instructions, continued
storms or when unused for long periods of time.
13 Refer all servicing to qualied service personnel. Servicing is required when the apparatus
has been damaged in any way, such as the power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into it, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14 WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain,
moisture, dripping or splashing.
15 The power adapter must remain easy to unplug from the power socket once the equipment
is installed.
16 DO NOT expose the remote control batteries to excessive heat such as re or sunshine.
17 Safety-related markings can be found on the underside of the receiver.
Installation
• Ground the installation in accordance with NEC® or other applicable codes.
• Locate the power adapter and receiver indoors in an open, well-ventilated area. Do not
place them in an enclosure (such as a cabinet) without proper ventilation.
• Place the receiver on its feet on a rm, stable, horizontal surface.
• Unplug the power adapter from the power socket during installation and follow all
connection instructions.
• Only connect the original power adapter to the receiver. Other power adapters may damage
the circuitry and cause a re risk.
• DO NOT place heavy objects on the receiver or power adapter.
• Keep plastic packaging and small parts away from babies and children.
ProtectfromWater
• DO NOT place objects lled with liquids, such as vases or drinks, on or near the power
adapter or receiver.
GeneralPrecautions
• DO NOT remove the power adapter cover due to risk of electric shock from live parts inside.
• DO NOT allow objects to drop or be pushed inside the receiver, for example by children.
• DO NOT place naked ames such as lighted candles on or near the receiver or power
adapter.
EquipmentCare
• Unplug the power adapter from the power socket before cleaning.
• If the power adapter or receiver is damaged, unplug it from the power socket and have it
checked by qualied personnel before operating it any further.
STBTV
INPUT CCZOOM AUDIO
FAVHDMIMEDIA MENU
GUIDE INFO
BACK EXIT
OK
VOL CH
SET
MUTE
RECORD
USB
ANT IN HDMIOUT
TO TV DC 12V
HDMIIN
From
Streaming Device
CM-7002
User Guide
Antenna
Set Top Box
ii Antenna Set Top Box
7002SetTopBox PowerAdapter RemoteControl
+2AAABatteries
UserGuide
For additional information, visit ChannelMaster.com.
USB2.0Port
Connects USB for Software
update/future use
IRSensor PowerButton
(onrightside)
Clock
HDMI®Output
Provides high-denition digital
audio and video to the TV
HDMI®Input
Provides gateway between
Streaming Device and the TV
AntennaIn
Connects over-the-air
antenna
Power
DC IN Provides
power to the device
What’s Included
Front Panel Controls
Rear Panel Connections
USB
ANT IN HDMIOUT
TO TV DC 12V
HDMIIN
From
Streaming Device
1
User Guide
Make sure your device is connected properly as shown below.
13
Note: Only use high-quality
HDMI and USB cables from
major manufacturers.
HDMI® Output
Provides high-denition digital
audio and video to the TV
Connections and Setup
2
HDMI to
TV
4
HDMI IN from
Streaming
Device
Antenna In
Connects over-the-air
antenna
STBTV
INPUT CCZOOM AUDIO
FAVHDMIMEDIA MENU
GUIDE INFO
BACK EXIT
OK
VOL CH
SET
MUTE
RECORD
2Antenna Set Top Box
Using the Remote Control
TV
Turns the TV on or off
ColoredButtons
Future use
Input
Selects the TV input
Zoom
Reformats screen ratio
Media
Future use
HDMI
Change between antenna
channels and your
streaming device
Rev/Fwd
Future use
Guide
Displays channel and
program information
Navigation
Choose options in menus,
guide, settings and info
bar
Back
Return to previous menu
or channel
Volume
TV Increase/decrease
Record
Future use
Mute
TV Silence audio output
Period
For channel change
STB
Turns the device on or off
Audio
Displays audio options
CC
Displays closed captioning
Menu
View main menu for
advanced options and
settings
Fav
Display the favorite
channels list
Stop
Future use
Play/Pause
Future use
Info
Displays channel and
program information
OK
Conrm
Exit
Close menu/guide and
return to viewing
Channel+/-
View previous/next
channel
NumericKeypad
Select channel directly by
number
Set
Use for programming the
remote to TV
STBTV
INPUT CCZOOM AUDIO
FAVHDMIMEDIA MENU
GUIDE INFO
BACK EXIT
OK
VOL CH
SET
MUTE
RECORD
STBTV
INPUT CCZOOM AUDIO
FAVHDMIMEDIA MENU
GUIDE INFO
BACK EXIT
OK
VOL CH
SET
MUTE
RECORD
STBTV
INPUT CCZOOM AUDIO
FAVHDMIMEDIA MENU
GUIDE INFO
BACK EXIT
OK
VOL CH
SET
MUTE
RECORD
SET
SET
VOL
VOL
INPUT
INPUT
3
User Guide
Programming the Remote Control
1
2
3
4
5
6
Face the TV remote and CM-7002 remote controls
head-on.
Press SET for 3 seconds on the CM-7002 remote
control. The Red LED will glow rst and then stay
lit.
Press the desired button on the CM-7002 remote
control within 10 seconds. The POWER button will
start ashing.
Note: Program one button at a time. You will need to run
through each step for each desired button.
Then press the desired button on the TV remote
control within 3 seconds. The red LED will ash 3
times and then stay bright.
Now press SET to conrm.
Repeat steps above for each key on the remote
you want to learn.
Program your CM-7002 remote to learn the TV’s POWER, MUTE, INPUT and
VOLUME functions.
TV
POWER
MUTE
MUTE
4Antenna Set Top Box
Getting Started
Setup Wizard
Highlight and select your Language, Country and if you are using over the air
antenna or cable. Press OK on Scan Antenna Channels or press OK on Scan
Cable Channels, depending on the source you are using.
Channel Search
A Channel Scan will begin automatically. After it is complete it will place you into
the rst available channel.
After the channel scan is complete you can begin enjoying live TV.
USB
ANT IN HDMIOUT
TO TV DC 12V
HDMIIN
From
Streaming Device
5
User Guide
Connect your streaming device (Apple TV, Roku, Amazon Fire TV stick etc.)
into the HDMI in port. Then connect a separate HDMI cable into the HDMI
out port and connect that to your TV as shown below. Please note that each
streaming device requires its own external power supply. The CM-7002 will not
power the streaming device.
Once that is connected and you are watching live over the air TV
through the CM-7002, take the CM-7002 remote control and press
the HDMI button.
Once you have pressed the HDMI button on the CM-7002 remote, the CM-
7002 will switch from Live TV to your streaming device. Be sure to have your
streaming device remote handy. Now you can begin to watch and stream your
favorite content alongside your favorite over the air broadcasts. To switch back
to live TV, press the HDMI button on your CM-7002 remote control.
Connecting a Streaming Device
HDMI OUT
to TV
HDMI IN
from Streaming
Device
6Antenna Set Top Box
Menu
Press the MENU key to display the main menu. It consists of 3 items as
follows:
• Channel Guide: View the guide or make edits to the lineup.
• System Settings: Set your user preferences.
• Advanced Settings: Make advanced edits to the settings.
NOTE: In any page of the menu, you can use the EXIT key to return to
previous menu page, or press the MENU key to switch to Main Menu.
Guide
Channel Guide
Selecting Channel Guide from the Main Menu or pressing the GUIDE button
on your remote control displays the Program Guide of the receiver. From the
Guide, you will be able to view other channels available and tune to those
channels. You can also see three future programs on each channel.
Table des matières
Langues :
Autres manuels Channel Master Décodeur
