Channel Master CM-7003 Manuel utilisateur
CM-7003
User Guide
Digital to Analog
Converter Box
Digital to Analog Converter Box
Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use the apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatuses (including ampliers)
that produce heat.
Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not t into your outlet,
consult an electrician for replacement of
the obsolete outlet.
Protect the power cord from being walked
on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories
specied by the manufacturer.
Unplug the apparatus during lightning
Warning and Attention Symbols
You must be aware of safety when you install and use this system. This User Guide provides
various procedures. If you do some of these procedures carelessly, you could injure or kill
yourself or damage equipment or property. Some other procedures require special attention.
The Class II equipment symbol means that the equipment has additional insulation and does not
need to be grounded.
: To reduce the risk of re
or electric shock, do not expose this
appliance to rain or moisture.
Alternating Current (AC)
Direct Current (DC)
Indoor Use only
USB Connector
i
User Guide
Important Safety Instructions, continued
storms or when unused for long periods of time.
Refer all servicing to qualied service personnel. Servicing is required when the apparatus
has been damaged in any way, such as the power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into it, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain,
moisture, dripping or splashing.
The power adapter must remain easy to unplug from the power socket once the equipment
is installed.
DO NOT expose the remote control batteries to excessive heat such as re or sunshine.
Safety-related markings can be found on the underside of the receiver.
• Ground the installation in accordance with NEC® or other applicable codes.
• Locate the power adapter and receiver indoors in an open, well-ventilated area. Do not
place them in an enclosure (such as a cabinet) without proper ventilation.
• Place the receiver on its feet on a rm, stable, horizontal surface.
• Unplug the power adapter from the power socket during installation and follow all
connection instructions.
• Only connect the original power adapter to the receiver. Other power adapters may damage
the circuitry and cause a re risk.
• DO NOT place heavy objects on the receiver or power adapter.
• Keep plastic packaging and small parts away from babies and children.
• DO NOT place objects lled with liquids, such as vases or drinks, on or near the power
adapter or receiver.
• DO NOT remove the power adapter cover due to risk of electric shock from live parts inside.
• DO NOT allow objects to drop or be pushed inside the receiver, for example by children.
• DO NOT place naked ames such as lighted candles on or near the receiver or power
adapter.
• Unplug the power adapter from the power socket before cleaning.
• If the power adapter or receiver is damaged, unplug it from the power socket and have it
checked by qualied personnel before operating it any further.
CM-7003
User Guide
Digital to Analog
Converter Box
STBTV
INPUT CCZOOM AUDIO
FAVHDMIMEDIA MENU
GUIDE INFO
BACK EXIT
OK
VOL CH
SET
MUTE
RECORD
ii Digital to Analog Converter Box
For additional information, visit ChannelMaster.com.
Select
next / previous
channel
Standby (Red)
Power On (Green)
Turns power on/off;
push and hold
to reset
Connects to media
Provides high-denition
digital audio and video
to the TV
Provides high-denition digital
audio and video to the TV
Switch Ch3/Ch4
RF Signal out (NTSC
Ch3/Ch4 / loop through)
Digital audio output
Connects over-the-air
antenna
L/R Analog audio output
Video signal
output
DC IN Provides
power to the device
What’s Included
Front Panel Controls
Rear Panel Connections
1
User Guide
Make sure your device is connected properly as shown below.
Amplier
(Optional)
13
: Only use high-quality
HDMI and USB cables from
major manufacturers.
HDMI® Output
Provides high-denition digital
audio and video to the TV
Connections and Setup
VIDEO (YELLOW)
Y (GREEN)
Cb/Pb (BLUE)
Cr/Pr (RED)
COMPONENT
VIDEO IN
2a
HDMI
(Preffered
option)
2c
Composite Cable (If you
do not have an HDMI)
2b
Coaxial (If you have
a TV with no HDMI)
2d
Compenent
Cables (If you
do not have
Composite
HDMI)
Antenna In
Connects over-the-air
antenna
L (WHITE)
R (RED)
L (WHITE)
R (RED)
STBTV
INPUT CCZOOM AUDIO
FAVHDMIMEDIA MENU
GUIDE INFO
BACK EXIT
OK
VOL CH
SET
MUTE
RECORD
2Digital to Analog Converter Box
Using the Remote Control
Turns the TV on or off
Future use
Selects the TV input
Reformats screen ratio
View music, video, photos
via USB
Adjust resolution
Future use
Displays channel and
program information
Choose options in menus,
guide, settings and info
bar
Return to previous menu
or channel
TV Increase/decrease
Future use
TV Silence audio output
For channel change
Turns the device on or off
Displays audio options
Displays closed captioning
View main menu for
advanced options and
settings
Display the favorite
channels list
Future use
Future use
Displays channel and
program information
Conrm
Close menu/guide and
return to viewing
View previous/next
channel
Select channel directly by
number
Use for programming the
remote to TV
STBTV
INPUT CCZOOM AUDIO
FAVHDMIMEDIA MENU
GUIDE INFO
BACK EXIT
OK
VOL CH
SET
MUTE
RECORD
STBTV
INPUT CCZOOM AUDIO
FAVHDMIMEDIA MENU
GUIDE INFO
BACK EXIT
OK
VOL CH
SET
MUTE
RECORD
STBTV
INPUT CCZOOM AUDIO
FAVHDMIMEDIA MENU
GUIDE INFO
BACK EXIT
OK
VOL CH
SET
MUTE
RECORD
SET
SET
VOL
VOL
INPUT
INPUT
3
User Guide
Programming the Remote Control
1
2
3
4
5
6
Face the TV remote and CM-7003 remote controls
head-on.
Press for 3 seconds on the CM-7003 remote
control. The Red LED will glow rst and then stay
lit.
Press the desired button on the CM-7003 remote
control within 10 seconds. The button will
start ashing.
Note: Program one button at a time. You will need to run
through each step for each desired button.
Then press the desired button on the TV remote
control within 3 seconds. The red LED will ash 3
times and then stay bright.
Now press to conrm.
Repeat steps above for each key on the remote
you want to learn.
Program your CM-7003 remote to learn the TV’s , , and
functions.
4Digital to Analog Converter Box
Menu Operation
Press the key to display the main menu. It consists of 7 items as follows:
• Program
• Picture
• Channel Search
• Time
• Option
• System
• USB
NOTE: In any page of the menu, you can use the key to return to previous
menu page, or press the key to switch to Main Menu.
Program
Press the ▼ key rst, then press the ► key, enter into the Program Setting
Menu. (Default Password: 000000)
Choose the menu as per requested (Move/Skip/Lock/Delete/FAV/Rename).
You can edit the program list (Move/Skip/Lock/
Delete/FAV/Rename) within the program edit
menu. Press the key rst then the ▼
key to program edit, then press the ► key to
enter the Program edit screen. Here you can
edit the program list (Move/Skip/Lock/Delete/
FAV/Rename).
5
User Guide
Menu Operation
Picture
Aspect Ratio:
AUTO, 16:9 Pillar Box, 16.9
Pan & Scan, 4:3 Full, 16:9 Wide Screen
Resolution:
480i, 480p, 720p, 1080i & 1080p (60Hz)
Transparency: Adjust user interface transparency.
Channel Search
Use the ▼▲ keys to move up and down from one item to another, and press
► key to display corresponding sub-menu.
Auto Search
In the Main menu, use the ▼& ▲ keys to select Auto Search item, and press
► key to enter into the Auto Search menu.
Manual Search
In the Main menu, use the ▼& ▲ keys to select Auto Search item, and press
► key to enter into the Manual Search menu.
6Digital to Analog Converter Box
Menu Operation
You can press the to enter
channel or press number directional keys
to choose.
Press the to quit.
Country
In the Main menu use the ▼& ▲ keys to
select Country, and press ► key to select
different countries.
Signal Type
Use the ► key to select Off-air or cable.
Time
Time Offset Use the ► key to select Time Offset.
Country Region Use the ► key to select Country Region.
Time Zone Use the ► key to select Time Zone.
Sleep Press the ► key to select the Sleep Time (1~12 hours). Use the ► key
to choose on or off.
Power ON/OFF Press the ► key in the Setting menu, then select Power
ON Time or Power Off Time.
Daylight Time Use the ► key to select Daylight Savings Time.
Table des matières
Langues :
Autres manuels Channel Master Convertisseur de média
Channel Master
Channel Master CM-7000 Manuel utilisateur
Channel Master
Channel Master CM-7000 Manuel utilisateur
Channel Master
Channel Master CM-7000 Manuel utilisateur
Channel Master
Channel Master CM-7000 Manuel utilisateur
Channel Master
Channel Master CM-7004 Manuel utilisateur
Channel Master
Channel Master CM-7000 Mode d'emploi
Channel Master
Channel Master D2A CM-7000 Manuel utilisateur
