Champion SBT340 Manuel utilisateur

User Manual

Step 1Power ON

Find ”SBT340” in your Bluetooth list and select it.

BLUETOOTH CONNECTION

Step 2 Select device

Bluetooth

My device

SBT340

Power button/

Master

Sub-master

(Power on/oﬀ)

Press and hold the power button on the master speaker and

sub-master speaker simultaneously for 2 seconds. A sound will

be heard, and the two speakers will connect automatically.

A beep sound is heard when they are connected.

Multi -Function button

Indicator

Step 3 Paring

The blue LED indicator is lit when the paring is completed.

Blue LED indicator long bright

Power button/

Multi -Function button

Press and hold the button on the masterandsub-masterspeakers

simultaneously for 2 seconds. A sound will be heard, and the two

speakers will connect automatically. (Turn oﬀ Bluetooth on you

own device before TWS pairing)

TWS FUNCTION

TWS

INSTRUCTIONS

(Above master and sub-master)

Instructions

Indicator

05 06

12 3 2 3 VolumeButtons

Press the button quickly to increase the volume/press and

holdthe button for the next track

Press the button quickly to reduce the volume/press and

hold the button for the previous track

22 3R(Note: Both speakers can be controlled simultaneously after being paired.)

3BASIC FUNCTIONS

Press and hold the power button for 2 seconds to

power ON/ power OFF

Press the button quickly to answer/disconnect calls

Press the button twice to decline calls

Press the button quickly to resume/pause music

Press the button three times to disconnect TWS and press

the button 2 times again to disconnect the Bluetooth device.

1111111Power button/Multi-functionbutton (ON/OFF-button)

LED INDICATOR

Bluetooth indicator

Charging indicator

Turn on the speaker, the blue LED lamp begins to ﬂash.

The blue LED lamp stays lit when the connection is established.

Micro USB portIndicator

Charging mode

The red LED lamp is lit The red LED lamp

turns oﬀ

The red LED

lamp is ﬂashing

Fully charged Low battery

The blue LED lamp ﬂashes if the Bluetooth distance is too long.

Bluetooth will automatically disconnect after 10 minutes of inactivity.

The LED lamps on the sub-masterand master speaker ﬂash

when music is played.

PRODUCT SPECIFICATIONS

10W x 2Product NameSBT3405.0Bluetooth VersionBattery CapacityPlay TimeCharging Time3~4hours8hours (70% volume) Power USB ChargingProduct sizeProduct weight5V / 0.8A750g08

FREQUENTLY ASKT QUESTIONS

A: Check if the speaker is charged. Connect the charging cable

and try again after a few minutes.

Q: Why is the speaker turning oﬀ automatically?

Q: The speaker does not connect to a phone it previously

has been connected to.

A: First, remove the speaker from the phone’s Bluetooth list.Then press

the power ON-button quickly twice to restart pairing.

Q: Which type of charger shall I use with the speakers?

Q: What do I do if there is noise or discontinuous sound when

the speaker is playing?

Q: The speaker does not start?

IMPORTANT: To ensure the SBT340 does not get damaged by

water, remove all cables. Exposing the SBT249 to liquids without

doing so may lead to permanent damage to the speaker. Do not

expose the SBT340 to water drops or splashes during charging.

Being water resistant means it can withstand water splashes on

the cover.

A: All standard USB chargers can be used, but we recommend 5V/0.8A.

A: The speaker is recommended to be used within a 10 meters range,

in an environment unblocked by walls and similar. With a distance

over 10 meters or with blocking walls, noise can occur.

A: The speaker will turn oﬀ automatically and save energy if it is

not connected to Bluetooth within 10 minutes.

*(This speaker supports mobile devices as well as PC etc. In this manual the

speaker is illustrated with a mobile phone).

Steg 1 Ström på

BLUETOOTH ANSLUTNING

Power button/

Master

Sub-master

(Power on/oﬀ)

Håll inne strömknappen ( ) på master högtalaren och

sub-master högtalaren samtidigt i 2 sekunder, du kommer

att höra ett ljud och de två högtalarna kommer kopplas

ihop automatiskt. Du kommer att höra ett pip när de är

anslutna.

Multi -Function button

Indicator

Hitta ”SBT340” i din Bluetooth lista och välj den.

02 03

Steg 2 Välj enhet

Bluetooth

My device

SBT340

Steg 3 Parning

LED indikatorn lyser blått när parningen är klar.

Blue LED indicator long bright

Power button/

Multi -Function button

Indicator

2 3 Volym Knappar

Tryck på knappen snabbt för att höja volymen/håll inne

2 2för nästa spår

knappen

3för föregående spår

knappen

Tryck på knappen snabbt för att sänka volymen/håll inne

3(Anmärk: Båda högtalarna kan kontrolleras samtidigt efter att man

parkopplat dem.) Grundläggande funktion

Håll inne strömknappen i 2 sekunder för ström på/ ström av 1 Tryck på knappen snabbt för att svara/avsluta samtal 1Tryck på knappen två gånger för att avvisa samtal

1 Tryck på knappen snabbt för att återuppta/pausa musik

111 Tryck på knappen tre gånger för att koppla ifrån TWS,

1Strömknapp/Multifunktion knapp (på/av knapp)

och tryck på knappen 2 gånger igen för att koppla ifrån

Bluetooth enheten

Håll inne knappen på master och sub-master högtalaren

samtidigt i 2 sekunder, du kommer att höra ett ljud och

högtalarna kommer kopplas ihop automatiskt.

(Stäng av Bluetooth på din enhet innan TWS parning)

TWS FUNKTION

TWS

Funktions anvisningar

(Above master and sub-master) 12 3

Produkt Speciﬁkationer

10W x 2volymProdukt NamnSBT340Bluetooth VersionBatterikapacitetSpeltidLaddningstid3~4hours8hoursEﬀekt USB Laddning Produkt storlek Produkt vikt 5V / 0.8A750gLaddningsläge