Champion SD-10 Manuel utilisateur
OPTIONS
(2M) 08/03 Printed in U.S.A.
DG004
Pot, Pan And Utensil Washer
SD-10
SD-10 UTENSIL WASHER
STANDARD FEATURES
• Heavy-duty stainless steel construction
• Front-loading, split door design
• Separate wash and rinse tanks
• External pre-rinse and wash down hose
• Self-contained water heating
• Moisture resistant control gauges
• Recirculating wash water
• Maintenance free hub system
• Adjustable wash and rinse cycles
• Easy to remove, filter basket
• Digital Control & Information Center
• Flexible racking system
• Electric, steam or infrared gas water heating
• One-year parts and labor warranty
• Automatic fill
• Rinse tank and booster heater
• Stainless steel utensil rack with a hold-down
lid and one insert
Project______________________________________________
Item No._____________________________________________
Quantity_____________________________________________
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Additional Lift Door and Split Door Models:
LD-10 SD-36 LD-20LD-36 SD-20
Pot, Pan And
Utensil Washer
SD-10
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
SPECIFICATIONS
Machine Construction
12, 14, & 16 gauge Stainless steel.
Heliarc welded seams.
Door
Stainless Steel, split door design. Top half
rises, lower folds down to load/unload table.
Rotating Wash, Hub &
Spray Arm Assembly
Water driven, STAINLESS STEEL spray
arm assembly with STAINLESS Steel
jets, removable end caps and hand
operated quick release mechanism for
easy cleaning and reassembly. Mounted
on STAINLESS STEEL base.
Filter
Perforated, removable, Stainless Steel
basket.
Water Pump
5 H.P., 208/240 or 440/480 volt, 1 phase
or 3 phase, 60 cycle with output of 100
g.p.m. at 35 to 45 P.S.I.
Digital Control & Information
Center
110 volt control circuit, push pad operation
“Power On”, “Stop” and “Short, Medium,
or Long Wash Cycles”. Digital display
indicates “Time Remaining” for cycle. LED’s
indicate wash, rinse & unload functions.
Buzzer provides indication to unload. A
pre-programmed circuit board controller
allows push pad to be used as a “Diagnostic
Center”. Displays “Error Codes” for
troubleshooting.
Gauges
Wash temperature, rinse temperature,
wash jet pressure. Special moisture
resistant design.
Wash Tank
Stainless Steel with electric, infrared
gas, steam or steam coil heating,
thermostatically controlled, low water
protected, sloped to drain with a
25-gallon capacity.
Rinse Tank
Stainless Steel with electric, infrared gas
or steam coil booster heater provides
180°/190° hot sanitizing rinse.
Racks
Stainless Steel rod, built to match specific
washing requirements.
SD-10 UTENSIL WASHER
SPECIFICATIONS
MODEL SD-10
POT, PAN & UTENSIL WASHER
WASHER
CABINET
DOOR
RECIRCULATING
WASH TANK
WASH TANK
FILTER
WASH TANK
FILL VALVE
WASH TANK
DRAIN VALVE
WASH PUMP
ROTATING WASH
HUB & SPRAY ARM
ASSEMBLY
SANITIZING
RINSE TANK
RINSE SUPPLY
VALVE
FINAL RINSE
PIPING
Automatic washing machine designed to wash all pots, pans and utensils commonly used
in baking and cooking operations.
36" wide x 36" deep x 71 1/8" high. Clearance height: 87 5/8" (96 1/8" with optional infrared
gas heated rinse tank). Door opening: 26" wide x 28 1/2" high. Wash chamber: 24 3/8" wide
x 27 3/8" deep x 28 1/2" high. Constructed of #12, #14 and #16 gauge, type 304 #3 finish
STAINLESS STEEL. All seams tig-welded, cleaned inside, cleaned and buffed outside.
Front-loading, hinged door design for easy loading and unloading. The top half of the
door system rises while the lower half folds down to create a space saving drain table.
Door is interlocked with limit switch to prevent machine operation while door is open.
Door construction: 16 gauge, type 304 #3 finish, STAINLESS STEEL.
Heated by two (2) 6 kW 208/240 at 480 volt electric immersion heaters, thermostatically
controlled wash temperature and low water protection system. 25 gallons, 14 gauge
STAINLESS STEEL, sloped to drain. Infrared gas and steam heating options available.
Perforated, STAINLESS STEEL basket type. Double filter system for increased effectiveness
and easy cleaning without emptying wash tank.
Size 1/2" brass material, solenoid type, automatic.
Size 1-1/4" brass material, gate type for manual or electrically operated ball valve for
automatic option.
Wash pump with 5 H.P. ODP motor, (optional TEFC or wash down duty motors available)
208/240 or 480 volt, 3 phase or 1 phase, 60 cycle. Rated for 100 gallons per minute at
35 to 45 PSI. Mounted on #12 gauge STAINLESS STEEL formed channel base. Close
coupled centrifugal pump, bronze fitted with cast iron casing. Optional STAINLESS
STEEL wet end available.
Water driven, STAINLESS STEEL spray arm assembly with STAINLESS STEEL jets,
removable end caps and hand operated quick release mechanism for easy cleaning and
reassembly. Mounted on STAINLESS STEEL base.
STAINLESS STEEL, 6 gallon capacity, with one 6 Kw 208/240 or 480 volt electric booster
heater to provide 180°/190°F hot sanitizing rinse. Uses 2.8 gallons per 22 second cycle.
Infrared gas and steam coil heating options available.
Size 1/2" brass material, solenoid type, automatic.
Type 304 STAINLESS STEEL tubing with brass compression fittings and brass or
optional STAINLESS STEEL full cone rinse jets.
Rev: 8/03
CONTROL AND
INFORMATION
CENTER
WASH DOWN
SPRAY HOSE
STEAM
EXHAUST VENT
OPTIONAL
EXHAUST FAN
ELECTRIC
ENCLOSURE
RACKS
CONNECTIONS
WEIGHT
SERVICES
120 volt control circuit with push pad operation of “POWER ON,” “STOP” and “SHORT,
MEDIUM or LONG WASH CYCLES.” A digital display indicates “TIME REMAINING” for
each cycle. LED’s indicate wash, rinse and unload functions. A buzzer is also included to
provide an audible indication of time to unload. A pre-programmed circuit board allows the
push pad to be used as a “DIAGNOSTIC CENTER” by displaying “ERROR CODES” for ease
of troubleshooting. Moisture resistant gauges measure temperature and pressure for recirculated
wash and final rinse. NOTE: Optional NEMA 4X STAINLESS STEEL panel with push button
control and internal adjustable timers is available in lieu of digital push pad operation.
Externally mounted spray hose with insulated handle for pre-rinse of heavily soiled items
and easy cleaning and maintenance of machine.
Steam exhaust vent 6-5/8" I.D., consisting of 16 gauge rolled collar for PVC pipe
connection bolted to the top of the machine. Machine pre-wired with control timer for
the addition of a fan.
Side-mounted exhaust fan constructed for moisture laden air or other air stream
contaminants. Maximum temperature 250°F, 250 CFM @ 3/4" static pressure.
1/10 Hp, 115 volt motor, 1550 RPM.
Electrical control panel is NEMA 12 STAINLESS STEEL or optional NEMA 4X
STAINLESS STEEL with Square “D” components.
Customized to hold your specific items. Standard bakery racks include utensil rack with
hold-down lid and bun/sheet pan insert designed to hold ten pans, constructed of
STAINLESS STEEL rod, mig welded.
Water Inlet: 120°F, 3/4" NPT
Water Drain and Overflow: 1-1/4" NPT
Electrical: Two point connection through knock out on electrical enclosure.
Steam Heating Option: 1/2" NPT
Steam Condensate: 1/2" NPT
Natural or Propane Gas Heating Option: 1/2" NPT, 14" W.C. maximum inlet pressure.
Crated: 800 lbs. Uncrated: 600 lbs.
NOTE: All weights are approximate. Weights will vary depending on the number of
options included with the machine.
120 Volt -1 phase, 5 running amps, 15 amp service, plus one of the following:
CERTIFICATIONS UL and UL Sanitation listed (all). CUL Listed (electric and steam only).
SD-10 (8/03)
1Steam Supply: Consumption: 64 lbs./hr. @ 15 psi minimum
2Gas Supply: Consumption: 60,000 BTU/hr. @ 1/2 lb. pressure maximum
Running Amps
Elec. Spec.
208 Volt
3 phase 64
240 Volt
3 phase 56
480 Volt
3 phase 28
14
13
7
14
13
7
Electric Wash
Electric Booster
Steam Wash1
Steam Booster
Infrared Gas Wash2
Infrared Gas Booster
Table des matières
Autres manuels Champion Lave-vaisselle
Champion
Champion 44KPRB Manuel utilisateur
Champion
Champion Model 44 Manuel utilisateur
Champion
Champion EUCCW8 Manuel utilisateur
Champion
Champion Model 120 HDPW Manuel utilisateur
Champion
Champion DH5000T Series Manuel utilisateur
Champion
Champion Model I 66 Manuel utilisateur
Champion
Champion MODEL 2554 Manuel utilisateur
Champion
Champion Model CC Manuel utilisateur
Champion
Champion Model 66 DRWSPW Manuel utilisateur
Champion
Champion Model 44 LT Manuel utilisateur
Champion
Champion PRO Series Manuel utilisateur
Champion
Champion Model 44 Mode d'emploi
Champion
Champion Model 80 DRHDPW Manuel utilisateur
Champion
Champion CG Manuel utilisateur
Champion
Champion UH-150B Manuel utilisateur
Champion
Champion UH-200B Manuel utilisateur
Champion
Champion Eseries Manuel
Champion
Champion EUCCW4 Manuel utilisateur
Champion
Champion Model 64 Manuel utilisateur
Champion
Champion 44KB Manuel utilisateur
