Champion PP-28 Corner Manuel utilisateur
(2M) 8/03 Printed in U.S.A.
CH048
Pot, Pan, Utensil
Door Type
Washing Machine
PP-28
PP-28 POT, PAN, UTENSIL WASHER
STANDARD FEATURES
•Balanced door system
•Detergent/chemical connection provisions
•Door safety switch on each door
•Enclosure panels (front and sides)
•External lift-out refuse basket
•Fully automatic wash and rinse cycle
•Hold-down grid
•7.5-Hp drip-proof pump motor
•Interchangeable upper and lower wash and rinse arms
•Low water tank heat protection
•Recessed, front-mounted controls
•Six-inch diameter vent connection
•Electric wash tank heat
SPECIFIER STATEMENT
Specified unit will be Champion model PP-28 pot, pan,
utensil door type washing machine.
Features adjustable wash cycle depending on solid wares
from 2 to 5 minutes, revolving upper and lower high
pressure spray arms, large wash chamber spacious
enough to accommodate 140 quart mixing bowls, fully
automatic operation, and made entirely of heavy gauge
stainless steel from the base to spray arms. One year
parts and labor warranty.
Project____________________________________
Item No.____________________________________
Quantity______________________________________
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
OPTIONS & ACCESSORIES
Corner Operation
Straight-through Operation
Front-loading Operation
Ten-inch Shelf on front-loading machine
Steam Coil tank heat
Steam Injector tank heat
Boosters, Stainless Steel (completely
interplumbed, controls are interwired)
Steam: 40°F-70°F Rise (built-in) (externally
mounted with cover for corner model)
Electric: 40°F Rise (built-in) (externally mounted
with cover for corner model)
70°F Rise (externally mounted with cover)
Exhaust Fan, 1/3 Hp
Racks, Stainless Steel (5" x 28" x 28")
NOTE: ALL electric boosters require separate electrical
connection.
Electric Steam Electric Heat Steam Heat
Voltage Heat Heat & Exhaust Fan & Exhaust Fan
208/60/3 50 22 53 25
240/60/3 45 21 48 24
480/60/3 22 11 24 13
Pot, Pan, Utensil
Door Type
Washing Machine
PP-28
Volume crated: 111 cu. ft.
Shipping weight crated: 1100 lbs.
Shipping weight crated
with built-in booster: 1200 lbs.
Details, Dimensions & Connections
Warning: Plumbing and electrical connections should be made by
qualified workmen who will observe all the applicable plumbing, sanitary,
safety codes and the National Electrical Code.
Plumbing Notes: Because of the variation in house-supplied steam
and water pressures, steam and water pressure regulating valves (PRVs)
are needed (water PRV is standard on model with built-in booster). The
PRVs can either be purchased from Champion or obtained locally.
Note: Water Hammer Arrestor (meeting ASSE-1010 standard or
equivalent) to be supplied (by others) in common water supply line
at service connection.
Utilities
1 Electrical
ASee box (1) for machine connection.
BSee box (2) for separate built-in 27 kW electric booster
connection.
2Hot Water
A1" NPT 180°F connection. Flow pressure 20-22 psi/82.5 gph.
B1" NPT 140°F connection. Flow pressure 20-22 psi/82.5 gph.
Unmounted water PRV provided.
3Drain
A1-1/2" NPT connection. Maximum flow 15 gpm.
B3/4" NPT steam booster relief to open drain.
4Vent
6" diameter. 200 cfm. (Contact the factory for optional
exhaust fan connections.)
5 Steam
A3/4" NPT connection. Flow pressure 15-30 psi.
B1-1/4" NPT connection (steam heat, steam booster).
6 Condensate
A1/2" NPT machine connection return to boiler
(steam coil heat only).
B3/4" NPT machine connection return to boiler
(steam heat, steam booster).
4
3/4"
28
1/2"3
1/4"25
1/4"
35
3/4"
11
1/4"
9
1/2"
4
1/2"
24
1/4"
12
1/2"
4
5/8"
28
3/8"
6" MIN.
INSIDE TRACK
*With built-in booster, allow
approximately 24" clearance
for ease of use.
6" MIN.
24"
37"
4"
3"
4"
42"
15"
34"
1"
73"
28"
CLEARANCE
THROUGH
MACHINE
12"
PLUMBING
CLEARANCE
34"
TABLE
HEIGHT
CONNECTION
19"
17"
5"
10"
WALL
4
3/4"
28
3/8"
28
7
/
8
" OPENING
28
1
/
2
" INSIDE TRACKS
6" MIN. 6" MIN.
WALL
INSIDE TRACK
2A
2A
1A 3A 6A 5A
4
5A
6A
4
1A
3A
2
TYPICAL
TABLE CONSTRUCTION
1
1
/
2
" ROLL
28
7/8"
1"
2"
95"
DOORS
UP
36"
106"
DOOR
REMOVAL
Front Loading
Operation
Electric or Steam Heat
Corner
Operation
Plan View
Front View Side View
BOOSTER
CONSULT FACTORY
FOR CLEARANCE
Machine Load Amps
Front Loading
Operation
Electric or Steam Heat
Plan View
Front View Side View
Corner
Operation
Dimensions shown in inches
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
Pot, Pan, Utensil
Door Type
Washing Machine
PP-28
SPECIFICATIONS
Machine Capacities
Racks per hr. (NSF rated) 25
Wash tank (gal.) 24
Motor Horsepower
Wash 7.5
Pump Capacity (gpm) 280
Wash Nozzle Pressure
(ft. head water) 50
Water Consumption
Gal. per hr. (max. use) 82
Gal. per rack 3.3
Temperatures °F
Wash 150
Rinse 180
Heating
Tank heat, electric (kW) 10
Tank heat, steam
(lbs./hr. at 15 psi flow pressure) 50
Electric booster (Kw required for 40°F rise) 27
Electric booster (kW required for 70°F rise) 45
Steam booster (lbs./hr. required for 40°F rise) 50
Steam booster (lbs./hr. required for 70°F rise) 85
Time Cycle
Wash – adjustable (minutes) 2-5
Rinse (seconds) 16
NOTE: For 70°F rise booster
connections and load amps,
contact factory. For corner
model booster connections and
load amps, contact factory.
For booster connections
contact factory.
28
1/2"3
1/4"21
1/2"
30
3/8"
35
3/4"
11
1/4"
9
1/2"
8
3/4"
7
3/4"
2
3/4"
4
1/2"
24
1/4"
12
1/2"10
1/2"
8
1
/
2
"
8"
6"
4
1/4"
24"
37"
3"
16"
4"
42"
15"
34"
1"
73"
34"
TABLE
HEIGHT
CONNECTION
2A
1A 3A 2B
6B
3B 5
4
5A
6A
6A
6A
4
1A3A
L
Steam Booster Electric Booster
Plan View
Front View
28
1/2"3
1/4"
35
3/4"
11
1/4"
2
1/2"
12
1/2"
9
1/2"
2
1/2"
4
1/2"
24
1/4"
12
1/2"9
3/4"
22
1
/
2
"
24"
42"
37"
18"
15"
34"
1"
73"
34"
TABLE
HEIGHT
CONNECTION
2A
1A 3A 1B
2B
4
4
1B
2B
1A3A
Plan View
Front View
Load Amps Electric Booster
(27 kW) (When specified)
Voltage PP-28
208/60/3 75
240/60/3 65
480/60/3 34
Front View Front View
Steam Booster
Plan View Plan View
Electric Booster
Dimensions shown in inches
Pot, Pan, Utensil
Door Type
Washing Machine
PP-28
PP-28 POT, PAN, UTENSIL WASHER
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
Basket Rack
Utility Rack
Bake Sheet Rack
Pan Rack
ACCESSORIES
Rack Basket P/N 109584
(utensils and loose items)
Rack Pan P/N 109585
(baking pans)
Rack Bake Sheet P/N 109587
(baking sheets)
Rack Utility P/N 109586
(large pots and pans)
Autres manuels pour PP-28 Corner
1
Table des matières
Autres manuels Champion Lave-vaisselle
Champion
Champion 44KPRB Manuel utilisateur
Champion
Champion UH-150B Manuel utilisateur
Champion
Champion USN-10 Manuel utilisateur
Champion
Champion DH6000T-VHR Guide de configuration
Champion
Champion UH-200B Manuel utilisateur
Champion
Champion 44KB Manuel utilisateur
Champion
Champion D-HBM5 Instructions d'installation et d'utilisation
Champion
Champion D-H1T Manuel utilisateur
Champion
Champion EUCCW4 Manuel utilisateur
Champion
Champion Model 120 HDPW Manuel utilisateur
Champion
Champion I-DHM4 Manuel utilisateur
Champion
Champion Model 66 LTPW Manuel utilisateur
Champion
Champion USN-72 Manuel utilisateur
Champion
Champion MODEL 2554 Manuel utilisateur
Champion
Champion PRO Series Manuel utilisateur
Champion
Champion UH-100B Manuel utilisateur
Champion
Champion Model CC Manuel utilisateur
Champion
Champion D-H1T Manuel utilisateur
Champion
Champion CGM7.5 Guide de configuration
Champion
Champion 64 PRO Guide de configuration
