Champ Dolphin SD500 Manuel utilisateur
Dolphin SD500
CCD Barcode Scanner
User Manual Ver.00
2
3
We Value Your ID’s
HQ
CHAMPTEK INCORPORATED
5/F, No.2 Alley 2, Shin-Wei Lane,
Chung Cheng Rd., Hsin Tien City 231,
Taipei, Taiwan
Tel:+886-2-2219-2385
Fax:+886-2-2219-2387
E-mail:[email protected]
www.champtek.com
CHINA
CHAMPTEK INCORPORATED
#901, No. 39, Wuzhong Rd., Shanghai 200235, China
Tel: +86-21-5489-0021
Fax: +86-21-5489-1833
EMEA
SCANTECH-ID BV
Amersfoortsestraat 124
3769 AN Soesterberg
The Netherlands
Tel:+31-33-4698400
Fax:+31-33-4650615
E-mail:[email protected]
www.scantech-id.com
Notice
The manufacturer shall not be liable for technical or editorial
errors or omissions contained herein; nor for incidental or
consequential damages in connection with the furnishing,
performance or use of the publication.
4
Table of Contents
1. PREFACE.....................................................1
Introduction....................................................1
Features ........................................................2
Safety Instructions.........................................2
Trademarks ...................................................2
2. GETTING STARTED ....................................3
Package Contents .........................................3
A Quick View of SD500 .................................3
Installation .....................................................4
Changing the cable .......................................5
Output Interface.............................................6
3. USING THE SCANNER................................7
LED INDICATOR...........................................7
SCANNER BEEP ..........................................7
SCAN MAP....................................................7
4. APPENDIX....................................................8
Product Specification.....................................8
Readable Symbology ....................................9
1
1. PREFACE
Introduction
Thank you for purchasing SD500 CCD Barcode
Scanner. SD500 is a cutting edge handheld
extra-slim CCD scanner which is coupled with
ergonomic design to ensure high quality, high
performance.
SD500 supports contact mode and also middle
range mode. For specification of SD500 which
supports the reading depth from contact to 8cm,
reading width up to 5cm on window and swift scan
rate is up to 300 scans /per second. In addition to
that, the guarantee of approximately
1,000,000-life-time trigger switch test is our
promise to fulfill your satisfaction.
In short, SD500 is absolutely a performance CCD
handheld scanner, which provides the customer
with the most cost-effective solution in the market.
It is perfectly suitable for any point of sale
environment. Because of the scanner’s compact
design, it is ideal to be used in the following
applications:
•Receiving in retail
•Product labeling and tracking
•Point of sale systems ( POS )
•Order picking and staging
•Work flow tracking
•Material flow control
•Transportation and distribution
•Warehousing
•Inventory management
2
Features
•Plug & Play for user-friendly design
•CCD Sensor adopted
•Multiple interface design: USB, PS/2, RS232
•Able to read a wide range of linear barcodes
•Scan speed: 300 scans per second
•Scanning distance: 0 - 80 mm ± 10%
•Extremely Low Power Consumption
•Most popular barcode symbologies are
supported.
Safety Instructions
•Please read the following safety statement
carefully.
•Please preserve this user manual for reference
sometime.
•Please handle the scanner with care. Do not
drop it.
•DO NOT expose the scanner to any flammable
sources.
•Keep the scanner away from excessive heat
and heaters.
•Keep the scanner away from water or moisture.
•Do not storage SD500 at the temperature lower
then -20°C (-4°F) or over 70°C (158°F).
•Please do not target the scanning light at
people's eyes.
•Do not attempt to self-service the scanner.
Trademarks
All names and product trademarks mentioned in
this document are the property of their respective
companies.
3
2. GETTING STARTED
Package Contents
Please check if your package comes with the
following items. If any of them is missing, please
contact your retailer.
•Scanner
•Interface cable (PS/2, RS232, USB)
•Programming Menu
•User Manual
A Quick View of SD500
Front View Back View
cSensor: Use to aim at the target barcode.
dTrigger: Use to activate scan.
eLid: Use to cover the cable socket.
fLED Indicator: Indicates the mode of scanner.
gCable: Use to connect to PC.
e
g
f
c
d
4
Installation
•Turn off the host system.
•Connect the power
if needed.
•Plug the connector
of the cable to the
host system.
•Turn on the host
system.
•For RS232 scanner,
there are 3 ways to
supplying the power,
use external +5V
power supply, use
optional power
cable (KBDC) which taking the power from KB
wedge, or if the host supports +5V power from
pin 9.
•When connected, the scanner will emit three
short beeps twice and the indicator flash green
light.
•If the defaults value is not fit your demand,
please configure the selection depended by
programming menu.
5
Changing the cable
The interface cable will be connected up the
scanner before packing. In case you need to
change the Interface cable, please refer to the
instructions as below.
1. Inject a needle into the hole and remove the
Lid.
2. Remove the cable.
3. Plug in the cable you need and push the string
relieve into the slot.
4. Place the Lid back and you will hear a “click”
when the Lip connect strictly.
6
Output Interface
Keyboard wedge interface
P1
Mini DIN 6M
P2
Mini DIN 6F Function Cable
Color
3 3 GND Brown
4 4 VCC Red
1 HOST DATA Green
5 HOST CLK Blue
1 KB DATA Yellow
5 KB CLK Orange
Iron Case Iron case Shielding Spiral
RS232 interface
DB9F Function Cable Color DC Jack
5 GND Brown
Case
9 POWER Red Core
2 TXD Orange
3 RXD Yellow
8 RTS Green
7 CTS Blue
Iron case Shielding Spiral
USB interface
P1
USB Type A Function Cable Color
4 GND GND Brown
3 D+ HC Blue
2 D1 HD Green
1 VCC VCC Red
Iron case Shielding Spiral
Table des matières
Autres manuels Champ Lecteur de codes-barres
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
