Chamberlain WIRELESS GATE ACCESS RGAIPI Manuel utilisateur

Carton Inventory

Overview

The Wireless Gate Access Intercom allows

homeowners to communicate with guests at the gate

and operate the gate from inside the house. The

Indoor Intercom emits a doorbell sound and

establishes a secure 900 Mhz digital radio link with

the Outdoor Intercom. The Wireless Gate Access

Intercom is compatible with various Chamberlain

Wireless Products and all Chamberlain Gate

Operators.

Indoor Intercom

Rubber Pads

Operation & Features

Talk Button: Following the ringing

of the doorbell by a guest, press

and hold the Talk button to talk to

the guest. Once the link to the

Outdoor Intercom is made, any

other intercoms in the network

cannot hear the conversation.

Select Button: During a conversation, the Select

button can be pressed to open the gate. A beep will

be heard and the gate will open. To open the gate

when not in a conversation, press and hold the Select

Button for 10 seconds.

Volume: Pressing the Volume

button repeatedly will cycle through

volume levels.

Battery: The AA Alkaline batteries

(not provided) will last up to a year

depending on use (Lithium batteries

recommended for colder

environments). When batteries are

low intercom will emit two beeps

every ten minutes.

An AC Adapter (not provided) can

also be used to power the

intercom. In this case, both the

power and channel lights will

remain on.

Volume Button

Talk

(Power - On)

Select Button

Learn Button Dipswitch #1

Dipswitch #2

AC Adapter

Model RGAIPI

Wireless Gate Access Intercom

OPTIONAL

Mounting Tape

Alcohol Wipe

Outdoor Intercom

Indoor Intercom

On/Off: To turn Indoor Intercom ON, press any

button. To turn Indoor Intercom OFF, hold down the

Volume button for 5 seconds.

Call Button

Speaker

Learn Button

Dipswitch

Block

Outdoor Intercom

Call Button: To communicate with the Indoor

Intercom, press and release the Call button. A

doorbell sound will be heard on the Indoor Intercom.

Once a secure link is made, the Call button on the

Outdoor Intercom does not need to be pressed to

speak again.

Battery: The AA Alkaline batteries (not provided) will

last up to a year depending on use. (Lithium batteries

recommended for colder environments.)

Volume: To increase the Outdoor Intercom volume,

set Dipswitch #4 to OFF.

Sensitivity: To increase sensitivity on

the Outdoor Intercom set Dipswitch #3

to OFF.

NOTE: Dipswitch #1 must always

remain ON. Dipswitch #2 is not used.

Assemble

Step 2: Adhere rubber pads to bottom.

Repeat Steps 1 and 2 for any additional intercoms.

Outdoor Intercom

Program Indoor Intercom to

Outdoor Intercom

Step 1: Press the Learn

button on the Indoor Intercom

until a beep is heard.

Step 2: Within 10 seconds

press the Learn button on the

Outdoor Intercom until a

multi-beep is heard.

NOTE: The Indoor Intercom

will beep for approximately 30

seconds indicating that

programming is successful.

To stop the beeps earlier,

press the Select Button on the

Indoor Intercom.

Indoor Intercom

Step 1: Install 4 AA Alkaline batteries (not provided).

(Lithium batteries recommended for colder

environments.)

Install 4 AA Alkaline batteries (not provided). (Lithium

batteries recommended for colder environments.)

Program Outdoor Intercom to

Gate Operator

Refer to the owner's manual of the gate operator to

find the location of the Learn button.

Step 1: Press the Learn button on the gate operator.

Step 2: Within 10 seconds

press and hold the Learn

button on the Outdoor

Intercom until a beep is heard.

Step 1

Peel paper from mounting tape. Firmly press Outdoor

Intercom onto mounting surface.

Clean back of Outdoor Intercom and mounting

surface using the alcohol wipe.

Mounting with Tape

Step 2

Secure cover with the

two large black screws.

Secure Cover

Peel off white paper from mounting tape. Firmly press

mounting tape on back of Outdoor Intercom.

Step 3

Mount Outdoor Intercom

The Outdoor Intercom should be mounted where it is

easily accessible to a driver. The Outdoor Intercom

can be mounted by using the included screws or by

using the double-sided mounting tape. It is

recommended to use the mounting tape on surfaces

such as metal or glass.

Mounting with Screws

Put the remaining silver screws into the bottom holes

of Outdoor Intercom. Tighten screws.

Step 2

Mount Outdoor Intercom with small silver screws.

Screw the top two screws halfway into the mounting

surface. Place back of Outdoor Intercom over screws.

Tighten screws.

Step 1

Troubleshooting

Indoor Intercom does not receive voice

transmission from Outdoor Intercom.

Check the batteries in both intercoms. Ensure the

Indoor Intercom is programmed to the Outdoor

Intercom. See Program Indoor Intercom to Outdoor

Intercom.

Indoor Intercom is not getting expected

transmission range.

Keep antenna vertical. Keep Outdoor Intercom away

from trees, metal objects and electrical wiring. Cell

phones, cordless phones, or other radio devices near

the Indoor Intercom may also limit range.

Indoor Intercom beeps once every ten minutes.

The battery is low in the Indoor Intercom. Replace

with AA Alkaline batteries or operate it with AC

Adapter (not provided). A 9-12 volt, 500mA AC

Adapter may be used (center positive polarity on the

round plug).

Indoor Intercom beeps three times every ten

minutes.

The battery is low in the Outdoor Intercom. Replace

with AA Alkaline batteries.

Need to clear Indoor Intercom’s memory.

Press and hold Learn button, an initial beep will be

heard. Continue to hold until a second beep is heard

(about 15 seconds). Ensure other intercoms are not

activated during this time. Intercoms in the network

that are on will signal during the clearing process.

Once memory is clear the intercom can be

programmed to a new network.

Outdoor Intercom does not function.

Check batteries in Outdoor Intercom. When you press

the Call button you should hear a tone.

Ensure Outdoor Intercom is connected to a network.

Program Additional Intercoms

NOTE: Some older versions of Chamberlain Wireless

Intercoms are not compatible with the Gate Access

Intercom. Ensure that the additional intercoms state

that they are compatible with Chamberlain's Gate

Access Intercom.

The Indoor Intercom can be programmed to at least

one other intercom to become a network or it can be

programmed into an existing network. Any intercom

that has been programmed into the network can

respond to a call and operate the gate.

INTERCOM LEARN MODE

Press the Learn

button until a beep is

heard.

Press and hold

both buttons for 5

seconds.

Each intercom will emit a tone when programmed into

network. Repeat for any additional intercoms.

NOTE: Do not program new intercoms to each other

before adding them to the network or they will form a

separate network and the memory will need to be

cleared.

Press the Learn button on the Indoor Intercom until a

beep is heard. Within 10 seconds put the new

intercom into Learn Mode (refer to table below).

Press and release the Talk button on the Indoor

Intercom to verify network is complete.

1 3/8"

4 1/4"

Mounting Template

NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this

receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery.

THERE ARE NO OTHER USER SERVICEABLE PARTS.

Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER:

1-800-528-9131

www.chamberlain-DIY.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Chamberlain Système d'interphone

Chamberlain

Chamberlain LiftMaster ELITE EL25 Manuel utilisateur

Chamberlain

Chamberlain LSIAC Manuel utilisateur

Chamberlain

Chamberlain NDIS Manuel utilisateur

Chamberlain

Chamberlain RFDIC Manuel utilisateur

Chamberlain

Chamberlain LiftMaster 831-2LM Manuel utilisateur

Chamberlain

Chamberlain OPI Manuel utilisateur

Chamberlain

Chamberlain EL1SS Guide de l'utilisateur

Chamberlain

Chamberlain WIRELESS PORTABLE INDOOR/OUTDOOR INTERCOM... Manuel utilisateur

Chamberlain

Chamberlain GAILM Manuel utilisateur

Chamberlain

Chamberlain MyQ Business CAPXL Manuel utilisateur

Chamberlain

Chamberlain Elite EL25N Manuel utilisateur

Chamberlain

Chamberlain Elite EL Series Manuel du propriétaire

Chamberlain

Chamberlain ROI2 Manuel utilisateur

Chamberlain

Chamberlain WIRELESS PORTABLE INDOOR/OUTDOOR INTERCOM... Manuel utilisateur

Chamberlain

Chamberlain ELITE EL2000LG Manuel du propriétaire

Chamberlain

Chamberlain RIFMS2 Manuel utilisateur

Chamberlain

Chamberlain NLS1 Manuel utilisateur

Chamberlain

Chamberlain MyQ Business CAPXL Manuel utilisateur

Chamberlain

Chamberlain LiftMaster Professional RIFM1LM Manuel utilisateur

Chamberlain

Chamberlain APEX Access Device Manuel utilisateur

Chamberlain

Chamberlain LiftMaster ELITE EL25 Manuel utilisateur

Chamberlain

Chamberlain 845EML Manuel utilisateur

Chamberlain

Chamberlain myQ Business CAPXM Manuel utilisateur

Chamberlain

Chamberlain CAPXS Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur