cGuard Beacon –User Guide
8
Pic.3. Advanced settings window
Also the working mode can be changed by the following SMS-commands:
PM_ASSET turns device mode to “Asset”,
PM_TRACKER turns device mode to “Tracker”.
“Asset” mode
In this mode device works by the following algorithm:
device leaves the deep sleeping mode and registers in a GSM network at a certain
time or after the specified time interval (how to set conditions for starting working
session –see below);
device sends data –object’s location and current speed to a monitoring server;
device returns to a deep sleeping mode.
Parameters to determine work conditions in asset mode:
ASSET_WAKE_AT –time, when the device starts working session in format hh:mm:ss,
example –13:30:00 (device gets in touch at 13:30 every day). If the value of this parameter is
24:00:00, this parameter is ignored;
ASSET_WAKE_DAY1–day, when the device starts working session (appropriate values –
MONDAY, TUESDAY etc., and also EVERYDAY). This parameter works together with
ASSET_WAKE_AT, and if ASSET_WAKE_AT is turned off (valued 24:00:00), then day
choosing parameter is ignored too;
ASSET_WAKE_PERIOD –time interval, after which device starts working, in minutes.
Example - 120 (device gets in touch every two hours). Minimal value –15 min.
1Available on devices with firmware 3.3.0 or higher
