CFE CFE-PVG2 Manuel utilisateur
CFE-PVG2 & 3
User Manual
Version 01
Release Date 2023-06-30
Disclaimers
After reading, keep the user's manual in a safe place for future reference.
If you do not operate this product accurately, you may cause serious injury
to yourself or others, or damage to the product and property damage.
By using this product, you will be deemed to have understood,
acknowledged and accepted the terms and content of this document in its
entirety. Users undertake to be responsible for their own actions and all
consequences arising therefrom. The company shall not be liable for all
losses caused by the user's failure to use the product in accordance with
the User Manual.
Subject to compliance with laws and regulations, the Company has the
final right of interpretation of this document and all related documents of
this product. As the product information is updated, revised or terminated
without notice, please pay attention to the latest product information on the
official website.
Special Important Notice
In any case, the voltage of the PV input is not allowed to exceed 180 V
（calculated by open circuit voltage series value of PV module）, otherwise this
equipment will be irreversibly damaged, and the resulting damage is not
covered by the warranty.
Contents
Product Profile ..................................................................................................1
Product Features ..............................................................................................1
Solar System Connection .................................................................................2
Product Overview .............................................................................................2
Product Specification ....................................................................................... 3
Installation Procedures .....................................................................................5
Front LCD Display Panel Operation Procedures ..............................................6
Suggested Wire Diameter Of Connected Cable ...............................................8
CAUTION .........................................................................................................9
Transportation & Storage ............................................................................... 10
1
Product Profile
This product is developed to meet the power supply needs for home or outdoor
work, and our company independently owns all software and hardware patents
and intellectual property rights under this product.
The product adopts digital design concept, intelligent sine wave output, adapts
to various loads and has a rich selection of external output interfaces; excellent
output short-circuit protection design, can withstand the impact of high-current
starting loads; one-touch intelligent switch design, easy to operate; widely
used in household electrical equipment, communication equipment, as well as
single-phase power equipment, and even industrial equipment, etc.
Product Features
Intelligent chip control, superior performance
High robustness, pure sine wave AC output, strong ability to bear different
loads
Strict short circuit protection design, very reliable working
Simple LCD display, clear display of working status
Intelligent charging control, extend the service life of the battery
All-round protection, safe and reliable
Adapt to a wide range of temperatures and high altitude areas
Adapt to unstable grid charging environment
Lightweight and portable, ultimate volume energy density and weight
energy density
2
Solar System Connection
Product Overview
1LED
212VDC Output / 5VDC Output
3DC Output Switch
4AC Output Switch
5Battery Switch
6AC Output
7AC Output Protect
8Solar Input
9AC Input
3
Product Specification
PVG 2
PVG 3
Product
Information
Product
Capacity
2560WH (25.6V 100AH)
2560WH (25.6V 100AH)
Certified
CE, ROHS, UL, UN3840
CE, ROHS, UL, UN3480
Product Size
514*344*620mm
514*344*620mm
Conversion
Efficiency
≥90%
≥90%
Cycle Life
3000 times +
3000 times +
Material
SPCC
SPCC
Output
Port
AC Output
220~230VAC, 50HZ/60HZ
9A, 2000W(MAX)
220~230VAC, 50HZ/60HZ
9A, 3000W(MAX)
Usb-A Port (×2)
Usb-C Port (×2)
QC4.0+: 5V=3A, 9V=3A,
12V=2.25A(MAX=27W)
QC4.0+: 5V=3A, 9V=3A,
12V=2.25A(MAX=27W)
PV Power
1800W
1800W
Input Port
DC Input
25.6VDC 100A (MAX)
25.6VDC 100A (MAX)
AC Input
190-280 VAC, 50HZ/60HZ
190-280 VAC, 50HZ/60HZ
PV Input
35-180VDC (MAX)
35-180VDC (MAX)
Battery
Information
Battery Type
Lithium iron phosphate
Lithium iron phosphate
Protective
Function
Overvoltage protection,
undervoltage protection,
Overvoltage protection,
undervoltage protection,
4
overcurrent protection,
short circuit protection,
temperature protection
overcurrent protection,
short circuit protection,
temperature protection
Discharge
Temperature
-20～60℃
-20～60℃
Charge
Temperature
0～55℃
0～55℃
Working
Humidity
<90 %RH
<90 %RH
Storage
Humidity
<90 %RH
<90 %RH
Size
320*235*165mm
320*235*165mm
Weight
18±0.5kg
18±0.5kg
Accessories
Great South African
Charging Cable
Great South African
Charging Cable
5
Installation Procedures
1. Before connect the cables, please check the product to ensure that the
start button, AC input protection switch and inverter output protection
switch are off.
2. Connect with solar panels:Red PV+ is the solar input positive terminal,
black PV- is the solar output negative terminal.In any case, the voltage of
the PV input is not allowed to exceed 180 V（calculated by open circuit
voltage series value of PV module ）, otherwise this equipment will be
irreversibly damaged, and the resulting damage is not covered by the
warranty.
3. AC connection, no need to connect AC if there is no AC. AC INPUT is AC/
alternator generator input, L is fire line, N is null line, G is ground line.
4. Connect with loads:AC OUTPUT is the inverter output, L is the fire wire, N
is the null wire, G is the ground wire, and the AC output protection switch
should be installed by yourself.
5. Double-check the wiring to prevent wrong connections, missed
connections, or short circuits.
6. press the power on button first, after the machine beeps. In turn, close the
power input protection switch, photovoltaic switch, as well as the addition
of all switches.
7. Check the LCD data to ensure that the machine has been working properly,
the correct installation is complete; (independent installation errors lead to
machine can not work, man-made intentional damage, independent
dismantling, force majeure factors, the above are not in the scope of free
repair)
8. If you are unable to determine the installation, please contact the factory
customer service and technical personnel.
6
Front LCD Display Panel Operation Procedures
Step No.
LCD Display & Operation Process
1
1) Connect the loads, battery and AC, switch the power
button(ON),enter into the first page as above photo.
2) All English operation display, can intuitive inverter all running
state and alarm state;
3) The first button is "return" second button is "turn up", the third
button is "turn down", the forth button is "confirm the current
setting parameter / or keep 3 seconds will enter into setting
mode".
2
1) Press "turn down "button, enter into the page as second photo;
2) page shows: PV voltage, charging current, generation power,
gross generation, MPPT module(status, temperature, output
voltage ).
7
3
1) Press "turn down "button, enter into the page as third photo;
2) Page shows: AC input voltage, inverter output voltage, battery
voltage, battery types, output frequency, loads percentage and
inverter running temperature.
4
1) Press "DOWN" button , enter into the setting page as fourth
photo;
2) This page shows: setting AC output voltage, frequency, AC input
range and recover to battery discharge delay time.
5
1) Press "DOWN" button, enter into the setting page as fifth photo;
2) This page shows: setting AC charging current , MPPT charging
Autres manuels pour CFE-PVG2
1
Ce manuel convient aux modèles suivants
1
Table des matières
