Centurion VECTOR2 Manuel utilisateur

VECTOR2 installation manual

LINEAR

SWING GATE

OPERATORS

Company ProfileCompany Profile

CENTURION SYSTEMS (Pty) Ltd reserves the right to make changes to the products described in this manual without notice

and without obligation of CENTURION SYSTEMS (Pty) Ltd to notify any persons of any such revisions or changes.

Additionally, CENTURION SYSTEMS (Pty) Ltd makes no representations or warranties with respect to this manual.

No part of this document may be copied, stored in a retrieval system or transmitted in any form or by any means electronic,

mechanical, optical or photographic, without the express prior written consent of CENTURION SYSTEMS (Pty) Ltd

Sales and technical support

to over 50 countries

worldwide

100%

testing to

specifications

In-house

R & D

development

team

Manufacture to

international

quality standard

ISO 9001:2008

1986 1990 1995 1999

Competent

after-sales

technical support

Centurion Systems

today

Contents

page 1

Page 2

page 2

page 3

Mechanical Setup

Electrical Setup

Commissioning and handover

IMPORTANT SAFETY INSTRUCTIONS

1. Declaration of conformity page 5

2. General description page 6

Lightning protection page 7

3. Icons used in this booklet page 7

4. Specifications page 8

Physical dimensions page 8

Technical specifications page 9

Control card page 10

Power supply page 10

Power supply, wall box and control card assembly page 10

Allowable gate mass page 10

5. Product identification page 12

6. Required tools & equipment page 14

7. Preparation of site page 15

General considerations for the installation page 15

Strength of the pillar page 16

Strength of the gate and gate bracket page 19

The Mechano Kit installation options page 20

8. Cabling requirements page 22

9. Operator installation page 23

Determine the gate bracket position page 24

Adjust origin clamp page 26

Inward swing gate Setup page 27

Outward swing gate Setup page 30

10. Determine gate swing angle page 33

11. Allowable wind loading page 34

12. Electrical Setup page 35

Secure control box to wall page 35

Connecting all wiring page 35

Setting the Limits page 36

13. Wiring diagram for closing safety beam page 37

14. Wiring diagram for opening safety beam page 38

15. Wiring diagram for external radio receiver and loop detector page 39

16. Wiring diagram for other inputs page 40

17. Wiring diagram for Master motor (MTRM) page 41

18. Wiring diagram for Slave motor (MTRS) page 42

19. Charger and Pillar Light connections page 43

20. Setting up additional features page 44

21. Menu navigation map page 45

22. Controller features page 48

23. Factory defaults schedule page 58

24. Description of terminal functions page 64

25. Diagnostics page 67

Diagnostic LEDs page 67

Gate status LEDs page 67

LCD display page 68

Buzzer feedback page 69

26. Installation handover page 70

Mount controller enclosure and

connect all wiring

Check cabling requirements

Mechanical setup

Gather required tools and equipment Page 14

Heed necessary site considerations Page 15

Page 22

Mount the wall bracket Page 24

Install motor and link to gate Page 25

Page 35

These quick steps are for the experienced installer who needs

a checklist to get a standard installation up and running in the

minimum of time.

Detailed installation features and functions are referred to

later in this manual.

Page 1

Electrical setup

Page 2

Commission system

Commissioning

and handover

Carry out professional handover to

client

Page 70

Set limit switches and/or fit

mechanical endstops Page 36

Warnings for the installer

CAREFULLY READ AND FOLLOW ALL INSTRUCTIONS

before beginning to install the product.

All installation, repair, and service work to this product

must be carried out by a suitably qualified person

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety

Do not activate your gate unless you can see it and can

determine that its area of travel is clear of people, pets, or

other obstructions

NO ONE MAY CROSS THE PATH OF A MOVING GATE.

Always keep people and objects away from the gate and its

area of travel

NEVER LET CHILDREN OPERATE OR PLAY WITH THE

GATE CONTROLS

Secure all easily accessed gate opener controls in order to

prevent unauthorised use of the gate

Do not in any way modify the components of the

automated system

Do not install the equipment in an explosive atmosphere:

the presence of flammable gasses or fumes is a serious

danger to safety

Before attempting any work on the system, cut electrical

power to the operator and disconnect the batteries

The mains power supply of the automated system must be

fitted with an all-pole switch with contact opening distance

of 3mm or greater. Use of a 5A thermal breaker with all-

pole circuit break is recommended

IMPORTANT

Safety Instructions

ATTENTION

To ensure the safety of people, it is important that you

read all the following instructions. Incorrect

installation or incorrect use of the product could cause

serious harm to people.

The installer, being either professional or DIY, is the

last person on the site who can ensure that the

operator is safely installed, and that the whole system

can be operated safely.

Page 3

Make sure that an earth leakage circuit breaker with a

threshold of 30mA is fitted upstream of the system

Never short circuit the battery and do not try to recharge the

batteries with power supply units other than that supplied

with the product, or by Centurion Systems

Make sure that the earthing system is correctly constructed,

and that all metal parts of the system are suitably earthed

Safety devices must be fitted to the installation to guard

against mechanical movement risks such as crushing,

dragging and shearing

It is recommended that at least one warning indicator light be

fitted to every system

Always fit the warning signs visibly to the inside and outside of

the gate

The installer must explain and demonstrate the manual

operation of the gate in case of an emergency, and must hand

the User/Warnings guide over to the user

Explain these safety instructions to all persons authorised to

use this gate, and be sure that they understand the hazards

associated with automated gates

Do not leave packing materials (plastic, polystyrene, etc.)

within reach of children as such materials are potential

sources of danger

Dispose of all waste products like packaging materials, worn

out batteries, etc, according to local regulations

Always check the obstruction detection system, and safety

devices for correct operation

Centurion Systems does not accept any liability caused by

improper use of the product, or for use other than that for

which the automated system was intended

This product was designed and built strictly for the use

indicated in this documentation. Any other use, not expressly

indicated here, could compromise the service life/operation of

the product and/or be a source of danger

Everything not expressly specified in these instructions is not

permitted

Page 4

Page 5

1. Declaration of conformity

Manufacturer:

Centurion Systems (Pty) Ltd

Unit 13 Production Park

Intersection Newmarket Road & Epsom Avenue

North Riding

Gauteng

South Africa

Declares that the product:

Product name: VECTOR2 Swing gate operator

Product options: All variants

Conforms with the following specifications:

Safety: SANS 60335-1:2007

IEC 60335-1:2006

Emissions: CISPR 22 CLASS B: Radiated emissions – 30MHz to 1000MHz

CISPR 22 CLASS B: Conducted emissions – 150 KHz to 30MHz

Immunity: IEC 61000-4-2 – Electrostatic discharge

IEC 61000-4-3 – Radiated immunity – 80MHz to 1000MHz

IEC 61000-4-4 – Electrical fast transients/burst

IEC 61000-4-5 – Surge immunity test

IEC 61000-4-6 – Conducted immunity – 150KHz to 80MHz

IEC 61000-4-8 – Power frequency magnetic field

IEC 61000-4-11– Voltage dips and interruption

Standard to which conformity is declared:

IEC 60335-1:2006 Safety

IEC 61000-6-3 Emissions

IEC 61000-6-1 Immunity

Signed at North Riding, South Africa on June 21, 2010

Ian Rozowsky

Research & Development Director.

2. General description

Page 6

The VECTOR2 operator has been designed to safely and cost-effectively automate a wide

variety of swing gates, from single light-domestic swing gates to heavy industrial double

swing gates.

The fail-safe and fully redundant position and Collision Detection system has been

designed and tested to set the standard in safety of operation and to provide an

unparalleled level of reliability and durability in operation.

The gate Travel Limits are managed by a sealed double-redundant opto-electronic system

that has been designed not only to ensure ultra-reliable operation, but also to ensure

precise position and trajectory control. This enables very accurate and reliable collision

detection to ensure safe operation even under trying conditions.

The VECTOR2 control card has been designed to be easy and intuitive to use with helpful

instructions on the status of the operation during and after the installation. It also has a

built-in diagnostic procedure that can verify every aspect of the control card on site.

Some of the advanced features offered by the VECTOR2 controller are:

Fully automated single button Limit Setup for single and double swing gates

Full graphics LCD display provides an intuitive user interface with built-in diagnostics to

speed up and simplify the installation process

Separate safety inputs for sensitive edges or beams on both the closing and opening

directions of the gate

Advanced closed-loop speed control to maintain safe and reliable operation on inclined

gates under windy conditions

Fully configurable gate Run Profiles

Selectable and adjustable Autoclose with pushbutton override

Pedestrian (Partial) opening with automatic closure

Free-exit input

Positive Close Mode

Multiple Modes of Operation

Solenoid lock drive output up to 2A

Holiday Lockout

A status LED output to indicate the gate status remotely

Pillar Light control

Leaf delay selectable for either gate leaf

Onboard CENTURION receiver with selective adding and deleting of remotes

Autres manuels pour VECTOR2

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Centurion ouvre-porte

Centurion

Centurion R3 Manuel utilisateur

Centurion

Centurion A10 Series Manuel utilisateur

Centurion

Centurion Vector Manuel utilisateur

Centurion

Centurion R3 Manuel utilisateur

Centurion

Centurion R3 Fiche technique

Centurion

Centurion D5-EVO REPAIR Manuel du propriétaire

Centurion

Centurion VECTOR2 Manuel utilisateur

Centurion

Centurion D10 Manuel utilisateur

Centurion

Centurion Auto-Mate Manuel utilisateur

Centurion

Centurion D10 Manuel utilisateur

Centurion

Centurion D2 Turbo Manuel utilisateur

Centurion

Centurion Auto-Mate Manuel utilisateur

Centurion

Centurion D2 Turbo Manuel utilisateur

Centurion

Centurion SMART GUARD air Manuel utilisateur

Centurion

Centurion A10 Series Mode d'emploi

Centurion

Centurion D5-EVO REPAIR Manuel utilisateur

Centurion

Centurion VECTOR2 Manuel utilisateur

Centurion

Centurion D10 Manuel utilisateur

Centurion

Centurion D5-EVO REPAIR Manuel utilisateur

Centurion

Centurion D3 Manuel utilisateur

Centurion

Centurion CP70R5 Manuel utilisateur

Centurion

Centurion D3 Manuel utilisateur

Centurion

Centurion LEVER4 Manuel utilisateur

Centurion

Centurion R3 Manuel utilisateur

Manuels ouvre-porte populaires d'autres marques

Elite

Elite CSW200UL Manuel utilisateur

CAME

CAME FROG-PM4 Manuel utilisateur

SOMFY

SOMFY FX230 Manuel utilisateur

Aprimatic

Aprimatic ONDA 500 Manuel utilisateur

Turnstiles

Turnstiles FSW 900 Manuel utilisateur

Erreka

Erreka BUL BL33 Mode d'emploi

Erreka

Erreka VULCAN S Manuel utilisateur

Beninca

Beninca R1-2 WBV Manuel utilisateur

Erreka

Erreka VULCAN D Manuel utilisateur

Motorline professional

Motorline professional FORT Mode d’emploi

Beninca

Beninca BOB5024 Manuel utilisateur

AGA

AGA GATEMASTER 900 HD Manuel utilisateur

Chamberlain

Chamberlain MotorLift HC280ML Manuel utilisateur

SOMFY

SOMFY Dexxo RTS Pro Manuel utilisateur

Cardin

Cardin BL Series Manuel utilisateur

Westfalia

Westfalia 85 27 06 Manuel utilisateur

CAME

CAME F500 Manuel utilisateur

Extel

Extel VERA Manuel utilisateur