Central Pneumatic 93629 Manuel utilisateur

MINI ORBITAL SANDER

Model

93629

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

contained herein may be reproduced in any shape or form without the express written consent of Harbor

Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improve-

ments, actual product may differ slightly from the product described herein. Tools required for assembly

and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

PRODUCT SPECIFICATIONS

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operat-

ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.

Keep your invoice with this manual. Write the invoice number on the inside of the front

cover. Keep this manual and invoice in a safe and dry place for future reference.

SAFETY WARNINGS AND PRECAUTIONS

UNPACKING

When unpacking, check to make sure that all the parts and accessories listed on page

8are included, and the product is intact and undamaged. If any parts are missing

or broken, please call Harbor Freight Tools at the number shown on the cover of this

manual as soon as possible.

SKU 93629 For technical questions, please call 1-800-444-3353 PAGE 2

2. Keep work area clean. Cluttered areas invite accidents.

3. Stay within air pressure capacity. Never operate the Air Sander above

90 PSI. Only to be used as a Sander, not to be used as grinder. Never use with

grinding disk.

WARNING! Use eye, breathing, and hearing protection. Always wear

ANSI approved safety impact goggles when using this Air Sander. Wear

an ANSI approved dust mask or respirator. And wear ANSI approved

hearing and clothing protection. Other people in the work area must also

wear appropriate ANSI approved safety equipment.

Item Description

Maximum Operating Air Pressure 90 PSI

Air Consumption 4.0 CFM @ 90 PSI

Air Inlet Size 1/4” - 18 NPT w/Filtation Screen

Free Speed 15,000 RPM

Sanding Disc Diameter 2”

Additional Features 90” Angled Head/Directional Side Exhaust

Paddle Type Throttle/Hook & Loop Fastening Pad

Accessories Fine Sanding Disc (Qty 1)/Medium Sanding Disc (Qty 1)

Coarse Sanding Dist (Qty 1)/Wrench (Qty 1)

New Weight 1.55 lbs.

8. Dress properly. Do not wear loose clothing or jewelry as they can be caught in

moving parts. Protective, electrically non-conductive clothes and non-skid foot-

wear are recommended when working. Wear restrictive hair covering to contain

long hair.

9. Do not overreach. Keep proper footing and balance at all times. Do not reach

over or across running tools or air hoses.

10. Disconnect air hose and release any built-up air pressure. Never service the

Air Sander or disassemble with the air hose attached. Always release any

built-up air even after disconnecting hose. Disconnect the Air Sander when

not in use.

SKU 93629 For technical questions, please call 1-800-444-3353 PAGE 3

6. Store idle equipment. When not in use, tools must be stored in a dry location

to inhibit rust. Always lock up tools and keep out of reach of children.

7. Use the right tool for the job. Do not attempt to force a small tool or

attachment to do the work of a larger industrial tool. There are certain

applications for which this tool was designed. It will do the job better and more

safely at the rate for which it was intended. Do not modify this tool, and do not

use this tool for a purpose for which it was not intended.

4. Observe work area conditions. Keep work area well lit. Do not use pneumatic

 toolsinthepresenceofammablegasesorliquids.

5. Keep children away. Children must never be allowed in the work area. Do not

let them handle machines, tools, extension cords, or air hoses.

11. Remove adjusting wrenches. Check that adjusting wrenches are removed

from the tool and work surface before attaching to an air source.

12. Avoid unintential starting. Be sure the Throttle (2) is in the OFF position

 whennotinuseandbeforepluggingin.Donotcarryanytoolwithyourngeron

Throttle, whether it is attached to an air source or not.

13. Stay alert. Watch what you are doing. Use common sense. Do not operate any

tool when you are tired.

14. Do not operate tool if under the inuence of alcohol or drugs. Read warning

 labelsiftakingprescriptionmedicinetodetermineifyourjudgementorreexes 

are impaired while taking drugs. If there is any doubt, do not operate the tool.

15. Compressed air only. Use clean, dry, regulated, compressed air at 90 PSI.

Never use oxygen, carbon dioxide, combustible gases, or any other bottled gas

as a power source for this tool.

SKU 93629 For technical questions, please call 1-800-444-3353 PAGE 4

17. Replacement parts and accessories. This product is to be repaired and

 servicedonlybyaqualiedtechnician.Whenthisproductisserviced,only 

identical replacement parts should be used. Use of any other parts will void the

warranty. Only use accessories intended for use with this tool. Approved

accessories are available from Harbor Freight Tools.

18. Maintenance. The maintenance outlined in the “Maintenance” section should be

performed regularly. For your safety, this product should be serviced or repaired

 regularlyonlybyaqualiedtechnician.

16. Check for damaged parts. Before using any tool, any part that appears

damaged should be carefully checked to determine that it will operate properly

and perform its intended function. Check for alignment and binding of moving

parts, any broken parts, and any other condition that may affect proper operation.

 Anypartthatisdamagedshouldbeproperlyrepairedorreplacedbyaqualied 

technician. Do not use the tool if the Throttle does not operate properly.

19. Transport Air Sander safely. Always disconnect air supply when moving the

tool in the workplace. Carry the tool by the handle and avoid contact with the

Throttle (2).

20. Avoid working alone. If an accident happens, an assistant can bring help.

21. Forbestservice,youshouldincorporateanoiler,regulator,andin-linelter,as

 showninthediagrambelow.Hoses,couplers,oilers,regulators,andltersare 

all available at Harbor Freight Tools. NOTE: If an automatic oiler is not used,

put 3-5 drops of pneumatic Tool Oil (not included) in the tool’s quick connector

before each use. (See Figure A.)

REGULATOR

FILTER

FIGURE A OILER

22. WARNING! Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities contain chemicals known (to the State of

California) to cause cancer, birth defects, or other reproductive harm. Some

examples of these chemicals are: Lead from lead-based paints, crystalline silica

from bricks, cement, and other masonry products, arsenic and chromium from

chemically treated lumber. (California Health & Safety Code § 25249.5, et seq.)

23. WARNING! The warnings, cautions, and instructions discussed in this

instruction manual cannot cover all possible conditions and situations that may

occur. It must be understood by the operator that common sense and caution

are factors which cannot be built into this product, but must be supplied by the

operator.

ASSEMBLY INSTRUCTIONS

1. Prior to use, the Air Sander requires the attachment of a Quick Connector

(not included) to its Air Inlet (7). To do so, make sure the screen Air Filter

within the Housing (1) is properly seated in the Housing. Wrap approximately

3” of pipe thread sealer tape (not included) around the male threads of the Quick

 Connector.Then,rmlytightentheQuickConnectorintotheAirInlet.

(See Figure B.)

SKU 93629 For technical questions, please call 1-800-444-3353 PAGE 5

OPERATING INSTRUCTIONS

1. CAUTION! Whenever possible, secure smaller workpieces in a vise or with

clamps (neither included) to avoid damage to the workpiece and/or personal

injury.

2. Attach a 2” diameter, self-adhesive, Sanding Disc (46, 46A, 46B) to the Pad (44)

of the Air Sander. (See Figure C, next page.)

Note: Do not use grinding wheels on this tool.

3. Make sure the Throttle (2) of the Air Sander is in its OFF (open) position. Then,

connect an air hose (not included) to the previously installed Quick Connector of

the tool. (See Figure C.)

HOUSING (1)

FIGURE B

AIR INLET

(7) AIR FILTER

(NOT SHOWN)

QUICK

CONNECTOR

(NOT INCLUDED)

FIGURE C

QUICK

CONNECTOR

(NOT INCLUDED)

THROTTLE

(2)

PAD

(44)

SANDING DISC

(46, 46A, 46B)

SKU 93629 For technical questions, please call 1-800-444-3353 PAGE 6

4. Connect the other end of the air hose to the air compressor system.

(See Figure A, page 4.)

5. Turn on the air compressor, and set its regulator to 90 PSI. Do not exceed

90 PSI.

6. GriptheAirSanderrmlywithboth hands.

7. Select an area on the workpiece to be sanded.

8. Squeeze the Throttle (2) to turn on the Air Sander. Make sure the Sanding Disc

(46, 46A, 46B) is not touching any surface before you turn on the tool.

(See Figure C.)

9. Place the revolving Sanding Disc (46, 46A, 46B) on the workpiece surface.

Then, move the Air Sander around the area to remove the residue. To increase

the rate of revolutions (RPM) of the Sanding Disc, squeeze the Throttle (2)

harder. To decrease the rate of revolutions, relax pressure on the Throttle.

(See Figure C.)

10. Keep a light pressure on the Air Sander while in use. Do not apply heavy

pressure, as damage to the surface area may result. (See Figure C.)

11. WARNING! Use eye, breathing, and hearing protection. Always wear

ANSI approved safety impact goggles when using this Air Sander. Wear

an ANSI approved dust mask, face shield or respirator. And wear ANSI

approved hearing protection. Other people in the work area must also

wear appropriate ANSI approved safety equipment.

12. WhennishedusingtheAirSander,releasepressureontheThrottle(2).Turn 

off the air compressor. Squeeze the Throttle again to release any compressed

air in the Air Sander. Disconnect the air hose from the tool. Then, store the Air

Sander in a clean, dry, safe location out of reach of children. (See Figure C.)

SKU 93629 For technical questions, please call 1-800-444-3353 PAGE 7

INSPECTION, MAINTENANCE, AND CLEANING

1. WARNING! Prior to performing any inspection, maintenance, or cleaning of

the Air Sander, make sure to disconnect the air hose from the tool. Then,

squeeze the Throttle (2) again to release any compressed air in the Air Sander.

2. To clean the exterior of the Air Sander, wipe with a clean, damp cloth using

a mild detergent or mild solvent. Do not immerse the tool in liquids.

3. When storing, always store the Air Sander in a clean, dry, safe location out

of reach of children.

4. CAUTION! All maintenance, service, and repairs not mentioned in this

 manualmustonlybeperformedbyaqualiedservicetechnician.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY

DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR

DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE

OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER

AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS

SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.

THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE

ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER

INSTALLATION OF REPLACEMENT PARTS THERETO.

SKU 93629 For technical questions, please call 1-800-444-3353 PAGE 8

SKU 93629 For technical questions, please call 1-800-444-3353 PAGE 9

REV10k

90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality

and durability standards, and warrants to the original purchaser that this product is free

from defects in materials and workmanship for the period of 90 days from the date of

purchase. This warranty does not apply to damage due directly or indirectly, to misuse,

abuse, negligence or accidents, repairs or alterations outside our facilities, criminal ac-

tivity, improper installation, normal wear and tear, or to lack of maintenance. We shall in

no event be liable for death, injuries to persons or property, or for incidental, contingent,

special or consequential damages arising from the use of our product. Some states

do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY

IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with

transportation charges prepaid. Proof of purchase date and an explanation of the com-

plaintmustaccompanythemerchandise.Ifourinspectionveriesthedefect,wewillei-

ther repair or replace the product at our election or we may elect to refund the purchase

price if we cannot readily and quickly provide you with a replacement. We will return re-

paired products at our expense, but if we determine there is no defect, or that the defect

resulted from causes not within the scope of our warranty, then you must bear the cost

of returning the product.

Thiswarrantygivesyouspeciclegalrightsandyoumayalsohaveotherrightswhich

vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353

Table des matières

Autres manuels Central Pneumatic Sander

Central Pneumatic

Central Pneumatic 68739 Manuel utilisateur

Central Pneumatic

Central Pneumatic Professional 97053 Manuel d'installation

Central Pneumatic

Central Pneumatic 65173 Manuel d'installation

Central Pneumatic

Central Pneumatic 98189 Manuel d'installation

Central Pneumatic

Central Pneumatic 93050 Manuel utilisateur

Central Pneumatic

Central Pneumatic 97956 Manuel d'installation

Central Pneumatic

Central Pneumatic 68152 Manuel d'instructions d'origine

Central Pneumatic

Central Pneumatic CENTRAL PNEUMATIC 91773 Manuel utilisateur

Central Pneumatic

Central Pneumatic 96445 Manuel utilisateur

Central Pneumatic

Central Pneumatic 97055 Manuel d'installation

Central Pneumatic

Central Pneumatic 34202 Manuel utilisateur

Central Pneumatic

Central Pneumatic 42966 Manuel utilisateur

Central Pneumatic

Central Pneumatic 93742 Manuel utilisateur

Central Pneumatic

Central Pneumatic 95030 Manuel d'installation

Central Pneumatic

Central Pneumatic 98895 Instructions de montage

Central Pneumatic

Central Pneumatic 66881 Manuel d'installation

Central Pneumatic

Central Pneumatic 96989 Manuel d'installation

Central Pneumatic

Central Pneumatic 90115 Manuel utilisateur

Central Pneumatic

Central Pneumatic 93742 Manuel utilisateur

Central Pneumatic

Central Pneumatic 35245 Manuel utilisateur

Central Pneumatic

Central Pneumatic CENTRAL PNEUMATIC 91773 Manuel d'installation

Central Pneumatic

Central Pneumatic 96573 Manuel d'installation

Central Pneumatic

Central Pneumatic 92558 Manuel utilisateur

Central Pneumatic

Central Pneumatic 4495 Manuel d'installation

Manuels Sander populaires d'autres marques

Oliver

Oliver 6305 Manuel utilisateur

Jet

Jet 22-44 Pro-3 Manuel de service

Makita

Makita M9204 Manuel

Makita

Makita M9204 Manuel utilisateur

Craftsman

Craftsman 351.215131 Manuel utilisateur

Clarke

Clarke Woodworker CBS1-5B Mode d’emploi

Chicago Pneumatic

Chicago Pneumatic CP9778 Manuel utilisateur

Nitto Kohki

Nitto Kohki BB-20 Manuel utilisateur

Ferm

Ferm FEOS-135 Manuel utilisateur

Unior

Unior 1510 Manuel utilisateur

stayer

stayer ls1200 Manuel utilisateur

Jet

Jet JSG-96 Manuel de service

Parkside

Parkside PDS 290 B2 Manuel utilisateur

Status

Status XPA Series Manuel utilisateur

Clarke

Clarke EZ Sand Manuel utilisateur

Craftsman

Craftsman 113.22521 Manuel utilisateur

Craftsman

Craftsman 113.225831 Manuel utilisateur

CLAS

CLAS OP 1429 Manuel utilisateur