CCX Technologies T-RX Manuel utilisateur

User Guide
Version 1.0

T-RX™ User Guide
Version 1.0
Product Information 3
What's in the box? 4
Charge your T-RX™ internal battery 5
How it works? 5
How to set up? 5
How do I connect the external antenna? 5
How do I adjust the screen brightness? 5
How do I calibrate the T-RX™ touchscreen? 5
How do I change the battery? 6
Getting Technical 6
Connector Info 6
ARINC 429 Connector Pinout 7
LED Indicators 8
GUI 101 8
T-RX™ Radio Standard Tests 9
VOR Test Options 9
ILS Test Options 10
Localizer Test Options 11
Glideslope Test Options 12
Marker Beacon Test Options 13
VHF Comm Test 14
T-RX™ Pulse Standard Tests 15
Transponder Mode A/C 16
FUTURE GUI Updates 16
Hardware Specifications 16
RF Specifications 17
Troubleshooting 19
FAQ 19
Contact Us 20
2

T-RX™ User Guide
Version 1.0
Product Information
T-RX™ is a rugged portable tablet with a large color sunlight-readable touch-screen display, with an
extended life battery, and internal or external antenna that allows aircraft maintainers to quickly and
easily test various aircraft avionics systems with ease.
T-RX™ is available in three variants. The standard tests for each variant are listed below, however, the
T-RX™ Radio and Pulse are capable of adding additional optional tests to suit your needs. Simply
contact CCX Technologies Inc. to order your additional optional tests.
T-RX™ Radio
VOR Generation
Receiver sensitivity and bearing accuracy.
ILS
Instrument Landing System components.
Localizer
Receiver sensitivity and deviation.
Glideslope
Receiver sensitivity and deviation.
Marker Beacon
Receiver sensitivity and deviation.
VHF Comm Generation
Receiver sensitivity, transmitter power, frequency, and modulation.
Antenna SWR
Measures VSWR in VOR/LOC, Glideslope, Marker, VHF Comm, ELT,
ADS-B and Transponder bands.
T-RX™ Pulse
Transponder Mode A/C
Power, Frequency, Receiver Sensitivity, SLS, Mode A code and Mode C
altitude.
Transponder Mode S
Power, Frequency, Receiver Sensitivity, SLS, Mode A code and Mode C
altitude, Mode S parameters.
ADS-B 1090
Power, Frequency, Receiver Sensitivity, SLS, Mode A code and Mode C
altitude, Mode S parameters, Extended Squitter, ADS-B OUT
parameters.
3

T-RX™ User Guide
Version 1.0
T-RX™ RP+
Includes all of the features of the T-RX™ Radio, T-RX™ Pulse and the optional tests below.
Optional Tests
DME
Receiver sensitivity, transmitter power, frequency, distance, and velocity.
ELT Reader
406MHz power, frequency, and reply decoding. It can also test the legacy
121.5MHz ELT.
HF Comm
Receiver sensitivity, transmitter power, frequency, and modulation.
SELCAL
Generate SELCAL tones modulated over HF or VHF.
ARINC 429
Transmit and Receive, Label encoding and decoding.
TCAS
Replies to TCAS interrogations at user-selectable altitudes and ranges.
ADS-B 978
Receiver sensitivity, power, frequency, ADS-B OUT parameters.
Getting Started
What's in the box?
- T-RX™ w/Li-ion smart battery installed (Figure 1)
- External Antenna (Figure 2)
- Charging Cable
Optional Accessory Kit includes:
- Pelican case (Figure 3)
- Extra battery (Figure 4)
- Battery charging dock (Figure 5)
4

T-RX™ User Guide
Version 1.0
Charge your T-RX™ internal battery
Your T-RX™ will arrive with the battery installed. Connect your charging cable to the charging port
(Item 8, Figure 6). Your battery will be fully charged when the middle LED stops blinking. Once fully
charged disconnect the charging cable.
How it works?
Press the power button (Item 1, Figure 6) to turn on your T-RX™. The first menu option at the top left
section of the screen defaults to “TESTS”. Simply press on the dropdown menu next to the “TESTS”
menu and select the desired test function. Various configurable options for the selected test will now
be available.
How to set up?
How do I connect the external antenna?
The T-RX™ has two internal antennas, but you may need to use the external antenna on certain
occasions. Connect the provided external antenna to TNC connector (item 6, Figure 6)
How do I adjust the screen brightness?
Press the “TESTS” menu at the top left section of the screen. Select “CONFIGURE”. Slide the
Backlight Brightness to the desired level.
How do I calibrate the T-RX™ touchscreen?
Press the “TESTS” menu at the top left section of the screen. Select “CONFIGURE”. Select
“CALIBRATE”. Follow the on-screen instructions to calibrate.
5

T-RX™ User Guide
Version 1.0
How do I change the battery?
Step 1
Using a #2 Phillips screwdriver, remove (4 ea) screws on the right end cap of your
T-RX™.
Step 2
Slide the right end cap off.
Step 3
Using the tab on the battery, pull the battery out.
Step 4
Slide the replacement battery into the battery port.
Step 5
Place the right end cap back onto the T-RX™.
Step 6
Reinstall the (4ea) screws that secure the end cap.
Getting Technical
Figure 6 - T-RX™ Connectors
Connector Info
1
Power
On/Off.
2
USB
Reserved for future use.
3
Ethernet 1
Used for retrieving test data and loading of software upgrades.
T-RX™ is a DHCP client.
4
Ethernet 2
Reserved for future use.
5
ARINC 429
ARINC 429 TX/RX
6
External Antenna
T-RX™ has an internal antenna, however, if needed the provided
external antenna can be used.
7
Direct Transmitter
Connection
Connects directly to a transmitter, such as a VHF comm,
Transponder, or DME, bypassing the aircraft antenna. It can also be
used for bench testing of these components.
8
External Charging Port
Used for charging the internal T-RX™ battery.
6

T-RX™ User Guide
Version 1.0
ARINC 429 Connector Pinout
Pin
Function
Pin
Function
Pin
Function
Pin
Function
Pin
Function
1
A429 RX + 1
2
A429 RX - 1
3
GND
4
A429 RX+ 2
5
A429 RX- 2
6
GND
7
A429 TX+
8
A429 TX-
9
GND
10
GND
11
Extra RF 5
12
Extra RF 4
13
Extra RF 3
14
Extra RF 2
15
Extra RF 1
7

T-RX™ User Guide
Version 1.0
LED Indicators
GUI 101
T-RX™ has an easy to use intuitive graphical user interface. To begin testing, start by ensuring the top
left menu is set to “TESTS”. Next press the menu to the right of “TESTS” to display all available test
options for your T-RX™. Select the test you wish to perform, and adjust the options for that test as
needed. When the options for your test are correctly set press “RUN” to begin the test.
8

T-RX™ User Guide
Version 1.0
T-RX™ Radio Standard Tests
VOR Test Options
1020 Hz Tone
On/off
Frequency
(MHz)
Select the desired frequency by selecting a preset, or by sliding the frequency
scale left or right.
Gain (dB)
Set the gain by pressing < or > or manually sliding to the required gain level.
Radial
Select from a radial preset, or by pressing < or >.
EANT
Select EANT for external antenna or no selection for the internal antenna.
9

T-RX™ User Guide
Version 1.0
ILS Test Options
Frequency
(MHz)
Select the desired frequency by selecting a preset, or by sliding the frequency
scale left or right.
Gain (dB)
Set the gain by pressing < or > or manually sliding to the required gain level.
Localizer
DDM. Select from a preset, or by pressing < or >.
Glideslope
DDM. Select from a preset, or by pressing < or >.
EANT
Select EANT for external antenna or no selection for the internal antenna.
10
Table des matières
Autres manuels CCX Technologies Équipement de test
Manuels Équipement de test populaires d'autres marques

SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur

Vernier
Vernier Go Direct Voltage Manuel utilisateur

Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke
Fluke T5-600 Instructions d'utilisation et d'installation












