CCTV MON-4HD Manuel utilisateur

MON-4HD

CCTV Test Monitor for analog, AHD, HD-TVI, HDCVI and IP Cameras

User Manual

（IPC1.03）

Learn more about this HD camera test monitor here.

Thank you for purchasing the IP camera tester. Please read the manual before using the IP camera

tester and use properly.

For using the IP camera tester safely, please first read the「Safety Information」carefully in the

manual.

The manual should be kept well in case of reference.

Keep the S/N label for after-sale service within warranty period. Product without S/N label will be

charged for repair service.

If there is any question or problem while using the IP camera tester, or damages occurred on the

product, please contact our technical Department.

Page!1!

Content

1 Safety information-------------------------------------------------------------------------------------------------- 3

2 IP Camera Tester Introduction------------------------------------------------------------------------------------ 4

2.1 General ------------------------------------------------------------------------------------------------- 4

2.2 Features ------------------------------------------------------------------------------------------------- 4

2.3 Function ------------------------------------------------------------------------------------------------- 7

2.4 Packing list -----------------------------------------------------------------------------------------------14

2.5 Function interface ---------------------------------------------------------------------------------------15

3. Operation ----------------------------------------------------------------------------------------------------------19

3.1 Installing the Battery------------------------------------------------------------------------------------19

3.2 Instrument connection ----------------------------------------------------------------------------------20

3.2.1 IP camera connection-------------------------------------------------------------------------20

3.2.2 Analog camera connection-------------------------------------------------------------------21

3.2.3 HD Coaxial camera connection -------------------------------------------------------------22

3.3 OSD menu------------------------------------------------------------------------------------------------23

3.3.1 Video monitor test (PTZ control)-----------------------------------------------------------25

3.3.2 Color-bar generator (TV OUT) -------------------------------------------------------------35

3.3.3 ONVIF------------------------------------------------------------------------------------------35

3.3.4 IP camera test----------------------------------------------------------------------------------44

3.3.5 SDI camera test （* Optional ）----------------------------------------------------------47

3.3.6 CVI camera test （* Optional ）---------------------------------------------------------49

3.3.7 TVI camera test （* Optional ）----------------------------------------------------------53

3.3.8 AHD camera test （* Optional ）--------------------------------------------------------55

3.3.9 IP address scan --------------------------------------------------------------------------------56

3.3.10 PING Test ------------------------------------------------------------------------------------57

3.3.11 Cable test -------------------------------------------------------------------------------------58

3.3.12 Cable tracer （* Optional ）-------------------------------------------------------------58

Page!2!

3.3.13 Port finder ------------------------------------------------------------------------------------60

3.3.14 Data monitor ---------------------------------------------------------------------------------61

3.3.15 Optical power meter （* Optional ）---------------------------------------------------61

3.3.16 Visual Fault Locator （* Optional ）---------------------------------------------------63

3.3.17 Digital Multi-meter （* Optional ）----------------------------------------------------64

3.3.18 Media Player ---------------------------------------------------------------------------------70

3.3.19 Audio player ---------------------------------------------------------------------------------71

3.3.20 LED Flashlight-------------------------------------------------------------------------------72

3.3.21 PoE/PSE Voltage test -----------------------------------------------------------------------72

3.3.22 TDR cable test （* Optional ）---------------------------------------------------------73

3.3.23 Calculator-------------------------------------------------------------------------------------76

3.3.24 Browser ---------------------------------------------------------------------------------------76

3.3.25 IP camera viewer ----------------------------------------------------------------------------77

3.3.26 PoE power / DC12V 2A and DC 5V 2A USB power output--------------------------78

3.3.27 Application tools ----------------------------------------------------------------------------80

3.3.28 APPS Tools Folder --------------------------------------------------------------------------88

3.3.29 System Setting -------------------------------------------------------------------------------89

3.3.30 Update-----------------------------------------------------------------------------------------92

3.4 HDMI output---------------------------------------------------------------------------------------------92

3.5 PoE power output ---------------------------------------------------------------------------------------92

3.6 DC12V 2A power output-------------------------------------------------------------------------------94

3.7 USB 5V 2A power output------------------------------------------------------------------------------95

3.8 Audio test ------------------------------------------------------------------------------------------------95

4. Specifications -----------------------------------------------------------------------------------------------------96

4.1 General Specifications----------------------------------------------------------------------------------96

4.2 Multi-meter specifications -----------------------------------------------------------------------------99

4.3 Optical power meter specifications ----------------------------------------------------------------- 101

4.4 Visual fault locator specifications------------------------------------------------------------------- 101

Page!3!

1 Safety information

The tester is intended to use in compliance with the local rules of the electrical usage and avoid to apply

at the places which are inapplicable for the use of electrics such as hospital, gas station etc.

◆To prevent the functional decline or failure, the product should not be sprinkled or damped.

◆The exposed part of the tester should not be touched by the dust and liquid.

◆During transportation and use, it is highly recommended to avoid the violent collision and vibration

of the tester, lest damaging components and causing failure.

◆Don’t leave the tester alone while charging and recharging. If the battery is found severely hot, the

tester should be powered off from the electric source at once. The tester should not be charged over 8

hours.

◆Don’t use the tester where the humidity is high. Once the tester is damp, power off immediately and

move away other connected cables.

◆The tester should not be used in the environment with the flammable gas.

◆Do not disassemble the instrument since no component inside can be repaired by the user. If the

disassembly is necessary indeed, please contact with the technician of our company.

◆The instrument should not be used under the environment with strong electromagnetic interference.

◆Don’t touch the tester with wet hands or waterish things.

◆Don’t use the detergent to clean and the dry cloth is suggested to use. If the dirt is not easy to

remove, the soft cloth with water or neutral detergent can be used. But the cloth should be tweaked

sufficiently.

About Digital Multi-meter

◆Before using, you must select the right input jack, function and range.

◆Never exceed the protection limit values indicated in specifications for each range of measurement.

◆When the tester is linked to a measurement circuit, do not touch unused terminals.

◆Do not measure voltage if the voltage on the terminals exceeds 660V above earth ground.

◆At the manual range, when the value scale to be measured is unknown beforehand, set the range

selector at the highest position.

◆Always be careful when working with voltages above 60V DC or 40V AC, keep fingers behind the

probe barriers while measuring.

Page!4!

◆Never connect the meter with any voltage source while the function switch is in the current,

resistance, capacitance, diode, continuity, otherwise it will damage the meter.

◆Never perform capacitance measurements unless the capacitor to be measured has been discharged

fully.

◆Never measure any of resistance, capacitance, diode or continuity measurements on live circuits.

Visual laser sources

When you turn on visual laser sources, please don’t stare at it, or will damage to eyes

When not using it, please turn it off and cover the protective cap

2 IP Camera Tester Introduction

2.1 General

The 4.3 inch touch screen IP camera monitor and tester is designed for maintenance and installation of

IP camera and analog camera as well as other security equipments , 800x480 resolution enables it to

display network HD cameras and analog cameras in high resolution. The unit supports many ONVIF

PTZ and analog PTZ control. The combination of touch screen and key buttons make the IP camera

tester very user- friendly.

The tester is also a great tool for Ethernet network testing. It can test PoE power voltage, PING, and IP

address searching. You can use the blue cable tracer to locate individual connected cables from a bundle

of cables. Test LAN cable for proper connection termination. Other functions include providing 24W

PoE power to your camera, LED Flashlight, DC 12V 2A power output and much more. Its portability,

user-friendly design and many other functions make the IP tester an essential tool for all installers or

technicians.

2.2 Features

² 4.3inch 800×480 touch screen, easy to operate.

² ONVIF IP camera video testing

² Compatible with H.264/MPEG4/MJPEG IP cameras, such as Dahua, HIKVISION, and ACTI

Page!5!

Customized service is available.

² Built in Wi-Fi ,can receive image from wireless camera, as well as ONVIF and customized IP

cameras.

² SDI Digital camera image display, record and screen snapshot

（

*Optional

）

² HD CVI camera image display, zoom ,video record and playback ,coaxial PTZ control and

call camera OSD menu

（

*Optional

）

² HD TVI camera image display, zoom ,video record and playback ,coaxial PTZ control and call

camera OSD menu

（

*Optional

）

² AHD camera image display, zoom ,video record and playback ,coaxial PTZ control and call

camera OSD menu

（

*Optional

）

² HDMI signal output, support 1080P

² Analog camera image display, Auto adapt and display the video format of NTSC/PAL

² Support more than 30 protocols ,such as PELCO-P,PELCO-D,SAMSUNG etc

² PEAK video signal level, SYNC signal level, Color burst chroma level measurement,test

video signal attenuation

（

*Optional

）

² Video image digital zoom to view the image in greater detail.

² Snapshot function allows you to save the current image as a JPG file in the SD card.

² LED Flashlight.

² 4GB Micro SD card included.

² LCD screen brightness/contrast/color Saturation adjustable

² Visual fault locator , to test fiber’s bending and breakage

（

*Optional

）

² Optical power meter ,test fiber loss and value

（

*Optional

）

² Digital Multi-meter , DC and AC voltage measurement, Resistance measurement

（

*Optional

）

² Enhanced Color bar generator, PAL/NTSC multi-system color bar video generator (Eight-

system switchable, transmit/receive eight-system colorful images).

² Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the

Page!6!

connected cable from messy cables.

（

*Optional

）

² Ping test, PING is the most conventional network debugging tools; it is used for testing if the

connected IP camera or other network equipment’s Ethernet port is working normally and the

IP address is correct.

² In digital IP surveillance applications, if the IP camera’s IP address is not known; the device

cannot be used. An IP address scan can quickly search for the connected IP camera or other

network device’s IP address.

² The PoE voltage test can test for PoE voltage when a POE switch is supplying POE power

to an IP camera

² TDR cable test, test cable open circuit and short-circuit

（

*Optional

）

² Cable test , Test LAN cable or telephone cable,UTP cable etc ,cable type and the sequence of

wires will be displayed

² Support RS232/RS485,Rate 600 ～115200bps adjustable

² PTZ protocol analysis, control protocol command displays to check RS485 transmission

whether is normal, easy to find the fault device

² PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and

sets and the preset position

² DC12V 2A output power for camera

² PoE 24W power output,supply temporary power for PoE camera

² DC5V 2A power output,as a power bank

² Audio input and output, test and output the audio signal

² 7.4V 48.1Wh Battery. Remaining battery charge indicator, Lithium Ion Polymer Battery can last

16 hours for normal use after charging for 8 hours

“*”Sign means the function Optional

Page!7!

2.3 Function

2.3.1 Touch screen and OSD menu

The IP camera tester combines touch screen control and physical buttons. This combination makes the

tester very user friendly. The test meter allows you to move the function icons from the tester’s main

menu to the APPS folder or move them back to customize the main menu

2.3.2 WIFI

With built in WIFI, you can view the video from a wireless camera (ONVIF or customized camera) or

connect to a Wireless network.

2.3.3 IP camera test

The device is designed for ONVIF IP camera testing. It can display the image from an IP camera and

change the IP address. 4.3 inch 800×480 screen display allows the user to view the image with a

sufficient screen size.

With the ONVIF tool, you can display the image from an IP camera and use the PTZ functions. Currently

the IP camera tester supports more than 70 brands’ IP cameras, such as most, ACTi, Dahua, Hikvision,

Samsung, Honeywell and many more.

OEM service is available. Users can send us the IP camera for our engineers try to add the protocols to

the tester, or send us the mobile apps (Android version. APK files) to install in the tester.

2.3.4 SDI camera test

（

*Optional

）

SDI digital video surveillance testing, support720p 60fps / 1080p 30fps / 1080i 60fps digital

camera image test and video image zoom, record, screen snapshot, photo viewer and video

playback .

2.3.5 CVI camera test

（

*Optional

）

HD CVI video surveillance testing, support 720p 25,30,50,60fps / 1080p 25,30fps digital camera image

test and video image zoom, record, snapshot, photo viewer, video playback, coaxial PTZ control and

Page!8!

call up the camera OSD menu

2.3.6 TVI camera test

（

*Optional

）

HD TVI video surveillance testing, support 720p 25,30,50,60fps / 1080p 25,30fps digital camera image

test and video image zoom, record, snapshot, photo viewer, video playback, coaxial PTZ control and call

up the camera OSD menu.

2.3.7 AHD camera test

（

*Optional

）

AHD video surveillance testing, support 720p 25,30fps / 1080p 25,30fps digital camera image test and

video image zoom, record, snapshot, photo viewer, video playback, coaxial PTZ control and call up the

camera OSD menu.

2.3.8 HDMI signal output

The HDMI output port supports up to a 1080p 60Hz resolution output.

2.3.9 Analog camera test

Display analog camera image ,4.3 inch 800×480 LCD screen display , supports PAL & NTSC formats.

The LCD screen's back light brightness, video image brightness, contrast and color saturation are all

adjustable.

2.3.10 Video level meter (*Optional)

Perform NTSC and PAL video amplitude signal measurements for PEAK to PEAK ,SYNC levels and

COLOR BURST chroma level.

Video signal PEAK to PEAK level:

For NTSC format, the video signal level is 140±15IRE

For PAL format, the video signal level is 1000±200mV

If the level is too low, it will cause the image to lose quality and limit the distance it will travel over cable.

If the level is too high, it will lead to wash out of the image

Table des matières

Autres manuels CCTV Équipement de test

CCTV

CCTV Tester Pro Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur