CCTV CSP-PB750 Manuel utilisateur
SONY EFFIO-V Security Camera
With On-Screen Display
Model CSP-PB750
FEATURES:
1/3 Sony Ex-View HAD II CCD
Sony EFFIO-V DSP
750TVL High Resolution
Wide Dynamic Range (WDR)
Scene Detection Function
3D Noise Reduction (3DNR)
On-Screen Display (OSD)
ATR-EX2
1AMP
12V DC
The CSP-PB750 is a “New Generation” 960H Professional Box Camera with SONY EFFIO-V DSP. This
camera was designed to provide the user with stunningly clear hi-resolution images in both daytime and
low light environments. With built-in Wide Dynamic Range (WDR) technology, this camera is capable of
providing clear images even under backlight circumstances where intensity of illumination can be vary
excessively. The camera is also equipped with many advanced features including a digital on-screen
display (OSD) menu which enables the user to adjust camera settings in order to achieve the highest
quality image.
CAUTION:
Do not attempt to service this video product by yourself as taking apart camera
may expose you to dangerous voltage or other hazards.
Please comply with all electrical safety standards during installation and
operation.
In order to prevent damage caused by fire or electric shock, please do not
submerse camera in water or expose any open parts to liquid.
Make sure to use the appropriate power supply and that the power is plugged
into the camera correctly and securely. Do not switch on power until after
camera connection is complete. This camera requires 12volt DC power.
Do not expose the lens directly to the sun or to strong light as this may damage
the pick-up device.
There are some sophisticated parts inside this camera, therefore, always handle
with care in order to avoid any internal damage to the camera.
Frequently Asked Questions:
No Image?
Check the power cable to the power box or wall outlet. Make sure video
and power connections are secure. Do not switch on power until camera
connection is complete.
If using a multiple output power box, make sure the power switch is in the
“ON” position & all of the fuses are illuminated.
If using a multiple output power box, make sure the POSITIVE (+) and
NEGATIVE (-) wires are connected correctly.
If using a spool of cable (not premade), make sure outer copper wire is not
touching the center pin.
Make sure the BNC video from connection from the camera is plugged into
the video input on the DVR or display.
Interface
1.
2.
3.
ENTER
Use this button to display the Main Menu and to Enter the
Submenus when they are available.
UP/DOWN
Select the desired feature by using Joystick with Up / Down
direction
LEFT/RIGHT
Change the status of the selected feature by using Joystick with
Left / Right direction
III OSD
Press “Enter” button for 2 seconds, the Camera screen will display the OSD Main
menu.
Users can select different options according to the camera environment, including
Automatic, Indoor, Outdoor, Backlight, Traffic Monitoring, user-defined.
3.1.1 Shutter/AGC
Move the cursor to the main menu function "Scene Select", press the " Enter "
button to display the " Advanced Settings" sub-menu, move the cursor to
" Shutter / AGC " item , this function can be divided into "Automatic" control,
"Manual" control, and "Fixed" control. The user can use the "Left and Right”
button to adjust the Settings.
Select "Auto”, press the “Confirm“ button to enter the sub-menu of Automatic
Control. Inside Auto Iris setting submenu, there have “AE LEVEL", “AGC MAX ",
“SENS UP" three settings.
“AGC” can adjust the peak value, the bigger the value, the brighter the picture,
but the noise will be much greater.
In “Sens Up”, there is “On” and “Off ” as an option.
Manual Setup, user can adjust the Shutter Mode Shutter Speed and AGC
.
3.1.2 WHITE BAL
White Balance can restore the authenticity of the color when it is affected by the
change of temperature. The user can choose different white balance mode
accordingly,
ATW/PUSH/USER1/USER2/ MANUAL/PUSH LOCK.
Normally, only when you choose “user defined” setting you can adjust the mood,
otherwise the white balance is fixed.
3.1.3 WDR
The WDR feature improves the dynamic range and the visibility of the image by
providing the optimal gradation compensation of the image in one field. This is
achieved by two ways of image processing, luminance compression and contrast
enhancement, so that the tone can be enhanced at highlighted and dark areas
For WDR, there are two sets. One is contrast , the other is clear face.
“Contrast” has three options----“ Low; Mid ; High”
“Clear Face” has four options----“Off ; Low; Mid ; High”
3.1.4 HLI/BLC
In the main menu, press the cursor to “Scene Selection”, press “Enter” button to
enter “advanced settings” sub-menu. In the “HLI/BLC” menu, press “left” “right”
key to select “off” “HLI” “BLC”, only the “Scene Selection” is “user defined”, you
can select “BLC”.
3.1.5 Adaptive Tone Reproduction
The ATR (Adaptive Tone Reproduction) function provides gradation compensation
to improve the contrast of subjects whose gradation has been lost in cases where,
for instance, both low-luminance areas and high-luminance areas exist in the
same picture.
"Clear Face" and" contrast "values can be chose between the "low, medium,
high", User can choose an appropriate value to achieve the best image quality.
Table des matières
Autres manuels CCTV Caméra de sécurité
CCTV
CCTV MS9110 Manuel utilisateur
CCTV
CCTV CSP-750ADV Manuel utilisateur
CCTV
CCTV PTA1215X Manuel utilisateur
CCTV
CCTV CMF1171X Manuel utilisateur
CCTV
CCTV je 6114 Manuel utilisateur
CCTV
CCTV WDR3600 Manuel utilisateur
CCTV
CCTV CSP-E700IR Manuel utilisateur
CCTV
CCTV URZ0147 Manuel utilisateur
CCTV
CCTV HCAM675B Manuel utilisateur
CCTV
CCTV HD-SDI Manuel utilisateur
