CCOM iNetVu 1.0 Flyaway Manuel utilisateur
iNetVu®1200/1000 Flyaway User Manual
The iNetVu®brand and logo are registered trademarks of C-COM Satellite Systems, Inc.
© Copyright 2006 C-COM Satellite Systems, Inc.
1-877-iNetVu6
www.c-comsat.com
Revision 020
March 22, 2012
C-COM Satellite Systems Inc. Page 2 of 38
iNetVu® Flyaway User Manual
This page is intentionally left blank.
C-COM Satellite Systems Inc. Page 3 of 38
Copyright © 2008. All rights reserved. C-COM Satellite Systems Inc.
This document contains information, which is protected by copyright. All rights reserved.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as
followed under the copyright laws.
Both the iNetVu®and C-COM names and logos are registered trademarks of C-COM Satellite
Systems Inc.
Intel®Pentium is a registered trademark of Intel Corporation. Microsoft, Windows, Windows NT
and MapPoint are registered trademarks of Microsoft Corporation.
All other product names mentioned in this manual may be trademarks or registered trademarks of
their respective companies and are the sole property of their respective manufacturers.
iNetVu® Flyaway User Manual
C-COM Satellite Systems Inc. Page 4 of 38
iNetVu® Flyaway User Manual
Table of Contents
1. Introduction..............................................................................................................5
1.1. About This Manual.............................................................................................. 5
1.2. System Overview................................................................................................ 5
2. Physical Outline.......................................................................................................7
3. Assembly and Disassembly....................................................................................8
3.1. Assembly Procedure........................................................................................... 8
3.2. Disassembly Procedure.................................................................................... 15
3.3. Packaging ......................................................................................................... 22
4. System Connectivity..............................................................................................24
4.1. Typical Connection – PC Free.......................................................................... 24
4.2. Network/Web Interface Connection .................................................................. 25
4.3. Typical USB Communication Interface ............................................................. 26
4.4. System Diagram with Splitter............................................................................ 27
4.5. Router Configuration Example.......................................................................... 28
4.6. Modem Independent Setup (Stand Alone) ....................................................... 29
4.7. USING MODEM COM PORT ........................................................................... 30
5. iNetVu®7000 Controller Configuration................................................................31
5.1. Software Initial Configuration and Verification .................................................. 31
6. Appendix.................................................................................................................37
6.1. Appendix 1: Default Limits and Configuration Data Tables .............................. 38
Proprietary Notice: This document contains information that is proprietary and
confidential to C-COM Satellite Systems, Inc., and is intended for internal and or
C-COM Satellite Systems Inc. authorized partners use only. No part of this
document may be copied or reproduced in any way, without prior written
permission of C-COM Satellite Systems, Inc.
C-COM Satellite Systems Inc. Page 5 of 38
1.Introduction
1.1. About This Manual
This manual explains the iNetVu®Flyaway System Installation and Operation. An
electronic version of this manual is included on the iNetVu®CD that came with your
system.
1.2. System Overview
Equipped to work with the iNetVu®7000 Controller, the iNetVu®Flyaway antenna is an
easily assembled, rugged and reliable product for automatic satellite acquisition. This
lightweight antenna is a rapidly deployable unit that is ideal for applications that require
satellite communication over Ku-Band. The Flyaway empowers users with the ability to
stop anywhere there exists satellite coverage and access Internet at broadband speeds.
The 1.2M Flyaway System comes with a protective case that has been designed to be
airline checkable. Without the use of any tools, the Flyaway could be field assembled
and operational in less than 10 minutes by one person.
Fig. 1: iNetVu®1200/1000 Flyaway
iNetVu® Flyaway User Manual
C-COM Satellite Systems Inc. Page 6 of 38
iNetVu® Flyaway User Manual
The iNetVu®Flyaway system offers the following additional capabilities and features:
3-Axes DC motor drive system
Highly reliable linear actuator to control elevation
Satellite acquisition within 5 minutes (under normal operating conditions)
Compatible with any configured satellite over the Ku Band
Fully automatic, software controlled satellite acquisition
Optimized signal reception and transmission
Self-calibrating and tuning after satellite acquisition
Stand Alone – Satellite Acquisition via DVB (modem independent)
Integrated with some of the leading satellite service providers available.
Easily assembled, light-weight carry gear
C-COM Satellite Systems Inc. Page 7 of 38
2.Physical Outline
2-piece
Detachable reflector
Feed Horn
Polarization
Assembly & Motor Feed Arm Struts
Elevation Motor
Feed Arm
Azimuth Motor &
Gear
iNetVu® Flyaway User Manual
C-COM Satellite Systems Inc. Page 8 of 38
3.Assembly and Disassembly
3.1. Assembly Procedure
Support Stand Assembly
1) Unfold the tripod assembly and lock the leg assemblies into place with the T-Handled
threaded knob as pictured below.
2) Unlock the two (2) T-Handled threaded knobs gripping the lock plate above the pivot
location of the lower reflector assembly. Lift the lock plate, and slide the lower
reflector assembly into the pivot as depicted in the figure below.
iNetVu® Flyaway User Manual
C-COM Satellite Systems Inc. Page 9 of 38
3) Push the lock plate towards the lower reflector assembly, and lock the two (2)
threaded knobs.
4) Attach the elevation motor assembly to the tripod assembly by sliding the elevation
bracket between the tripod assembly and the washers of the T-handled threaded
knobs. You may have to loosen the knobs before insertion.
When the elevation bracket is locked into place, tighten the two (2) T-handled
threaded knobs such that the washer firmly grips the bracket to the tripod assembly.
Facing the back of the reflector, the elevation motor should be facing left.
Note: Avoid twisting
the bellows when
handling the elevation
motor assembly.
iNetVu® Flyaway User Manual
C-COM Satellite Systems Inc. Page 10 of 38
5) Lock the elevation motor assembly into place by lining the mounting holes between
the lower reflector assembly and the elevation motor assembly and inserting the
quick release pin as depicted below.
6) Attach the upper reflector assembly to the lower reflector assembly making sure the
dowel pins fit securely in place.
iNetVu® Flyaway User Manual
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels CCOM Antenne
Manuels Antenne populaires d'autres marques
Alfa Network
Alfa Network APA-L01 Manuel utilisateur
Naval
Naval PR-422CA Manuel utilisateur
Feig Electronic
Feig Electronic ID ISC.ANTH200/200 Series Manuel utilisateur
TERK Technologies
TERK Technologies TV44 Manuel utilisateur
Directive Systems & Engineering
Directive Systems & Engineering DSE2324LYRMK Manuel utilisateur
HP
HP J8999A Manuel utilisateur
CommScope
CommScope CMAX-OMFX-43M-I53 Manuel utilisateur
Ramsey Electronics
Ramsey Electronics DAP25 Manuel utilisateur
COBHAM
COBHAM SAILOR 800 VSAT Manuel d'utilisation et d'entretien
Trango Systems
Trango Systems AD900-9 Manuel utilisateur
Steren
Steren ANT-100 Manuel utilisateur
Proxim
Proxim 5054-PA-23 Manuel utilisateur