CATVISION CSC-101 Manuel utilisateur
Catvision Smart Security Camera
User Manual
Please read this manual carefully before using this product
V1.001
CSC-101
V1.001
PACKING LIST ……….01
PRODUCT OVERVIEW……..01
CONNECT THE CAMERA TO MOBILE DEVICE…..02
App Downloading and Installation
Account Registration and login
Connect the Camera to your Account
1. Connect the camera by scanning QR Code
2. Connect the Camera by AP Hotspot/ Wi-Fi
3. Connect the camera by EZ Mode
USE THE CAMERA ON MOBILE DEVICE ..
Function overview …11
1. Main Interface ………
Video Recording ….13
1. Record videos to a microSD card …14
2. Record videos to the cloud…
Video Playback
PTZ Function
1. Pan & Tilt & Zoom Function
Alarms and Notifications
1. Alarm Settings
2. Notification Settings
Intelligent Motion Tracking
Device Sharing
Cloud Service
1. Subscribe to a cloud plan
More Settings
USE THE CAMERA ON COMPUTER
TROUBLESHOOTING ..
CONTENT
CONNECT THE CAMERA TO MOBILE DEVICE
App Downloading and Installation
Search for Smart Life from App StoreTM /Google PlayTM , or scan the
QR Codes below to download and install the App into your mobile
device.
For iOS For Android
Google PlayTM is a trademark of google Inc, and App StoreTM is a
trademark of Apple Inc.
PACKING LIST
Smart Camera Camera Mount Power Adaptor
Screw Set User Manual
PRODUCT OVERVIEW
12
Account Registration and Login
Please register an account with a valid email address, then log in.
Connect the Camera to Smart Life Account
IMPORTANT:
1. This camera only supports a 2.4GHz Wi-Fi.
2. For a stable network connection, Please make sure the camera
and the mobile device are close to the router.
3. Avoid using special characters or symbols in your Wi-Fi name
and password, such as @@%$^$&&# and so on.
4. For all connection options, you will hear the voice prompts
after the camera is power on. Press and hold Reset button
slightly for 5~6 second to reset the camera if no voice prompts
was heard. You will hear a prompt on a successful reset.
Connect The Camera by Scanning QR Code
1. You will hear a prompt after plugging the camera to power
supply.
2. Now on your phone, Please turn on the location service and Wi-
Fi. Allow Smart Life App to access your location and use Wi-Fi.
3. Open the Smart Life app and login. Now click add device.
4. Now go to “Security & Video Surveillance” tab and select “Smart
Camera (Wi-Fi)”.
5. Check the check-box and press next.
6. Enter the Wi-Fi credentials and press next.
7. Now show this QR code to camera ‘s lens , your camera will give a
voice prompt on successful scanning. Press “I Heard a Prompt”.
8. Now let the device search camera in network. On successful
connection it will take you to device name changing page. Change
the name of camera and pres “Done” in top right corner.
9. Congratulation you have successfully connected your camera to
your mobile.
34
56
12
34
56
7
2. Connect the camera by AP Hotspot
1. Power on the camera, wait until you hear “ beep Sounds”.
2. Now lightly press reset button , you will hear a “clink Sound”.
3. It will take your camera into AP mode.
4. Now on your mobile open Smart Life App and press “add device”.
5. Now go to “Security & Video Surveillance” tab and select “Smart
Camera (Wi-Fi)”.
6. Now press “QR Mode” in top right corner and select “Wi-Fi
Mode”.
7. Now press “Next ” and select “Blink Slowly”.
8. Now enter the Wi-Fi credentials and press Next.
9. Now press “Go to Connect” it will take you to the settings page of
Wi-Fi. Select either “SmartLife-XXXX” or “SL-XXXX” SSID and go
back to Smart Life App.
10. Now let the device search camera in network. On successful
connection it will take you to device name changing page. Change
the name of camera and pres “Done” in top right corner.
11. Congratulation you have successfully connected your camera to
your mobile. 65
12
34
6
SmartLife-xxxx
56
788
3. Connect the camera by EZ Mode.
1. Power on the camera, wait until you hear “ beep Sounds”.
2. Now on your mobile open Smart Life App and press “add device”.
3. Now go to “Security & Video Surveillance” tab and select “Smart
Camera (Wi-Fi)”.
4. Now press “QR Mode” in top right corner and select “Wi-Fi
Mode”.
5. Now press “Next ” and select “Blink Quickly”.
6. Now enter the Wi-Fi credentials and press Next.
7. Now let the device search camera in network. On successful
connection it will take you to device name changing page. Change
the name of camera and pres “Done” in top right corner.
8. Congratulation you have successfully connected your camera to
your mobile.
Note:
1. Please make sure your mobile and camera are close to the
router.
2. Please make sure you are connecting only one camera at a time
with this mode.
56
12
34
56
7
USE THE CAMERA ON MOBILE DEVICE
Function Overview
1. Main Interface : (as shown in image left)
A. Setting: to open the camera settings
B. Preview mode (HD/SD): toggle the image quality between HD
and SD
C. Speaker mute: to mute the camera speaker
D. Zoom the screen: it will zoom in the live image
E. Landscape mode
F. Screenshot: capture a picture to the local album in App
G. Talk mode: press and hold to talk to people in front of the
camera
H. Record the video on your phone – press again to stop recording
I. Expand: show more functions
91
0
Expanded Menu
J. Landscape mode
K. Playback: to see the stored video in Memory card
L. Gallery: to see the stored video and snapshot
M. Theme: to select dark/light
N. Private Mode: to Camera on/off
O. Motion tracking (on/off)
P. Motion detection (on/off)
Q. Button management
R. Alarm message: to check the notification
S. Direction: to move the camera up-down/right-left
T. Cloud: check the video saved to the cloud
U. More features
910
Autres manuels pour CSC-101
1
Table des matières
Autres manuels CATVISION Caméra de sécurité
