Casio CDP-S130 Manuel utilisateur

CDP-S110/CDP-S160/EP-S130

MIDI Implementation

CASIO COMPUTER CO., LTD.

Contents

I MIDI Message Overview 4

1 Product Conﬁguration as a MIDI Device 4

1.1 Performance Controller Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.2 SoundGeneratorSection .................................... 4

2 Timbre Type Speciﬁc Operation 5

3 Conditions that Disable Message Send and Receive 6

II Channel Message 7

4 Receive Channel 7

5 Send Channel 7

6 Note Oﬀ 7

7 Note On 7

8 Control Change 7

8.1 BankSelect(00H,20H) ..................................... 8

8.2 Modulation wheel or lever (01H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

8.3 PortamentoTime(05H)..................................... 8

8.4 DataEntry(06H,26H)...................................... 9

8.5 ChannelVolume(07H) ..................................... 9

8.6 Pan(0AH) ............................................ 9

8.7 ExpressionController(0BH) .................................. 9

8.8 Damper pedal (sustain) (40H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

8.9 PortamentoOn/Oﬀ(41H).................................... 10

8.10 Sostenuto(42H) ......................................... 10

8.11 SoftPedal(43H)......................................... 10

8.12 FilterResonance(47H) ..................................... 11

8.13 ReleaseTime(48H) ....................................... 11

8.14 AttackTime(49H)........................................ 11

8.15 Filter Cutoﬀ Frequency (4AH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

8.16 PortamentoControl(54H) ................................... 12

8.17 ReverbSendLevel(5BH).................................... 12

8.18 ChorusSendLevel(5DH).................................... 12

8.19 RPN (Registered Parameter Number) LSB/MSB (64H,65H) . . . . . . . . . . . . . . . . 12

8.20 AllSoundOﬀ(78H)....................................... 13

8.21 ResetAllControllers(79H)................................... 13

8.22 AllNotesOﬀ(7BH)....................................... 14

8.23 Omni Mode Oﬀ (All Notes Oﬀ) (7CH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

8.24 Omni Mode On (All Notes Oﬀ) (7DH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

8.25 Mono Mode On (Poly Mode Oﬀ) (All Notes Oﬀ) (7EH) . . . . . . . . . . . . . . . . . . . 14

8.26 Poly Mode On (Mono Mode Oﬀ) (All Notes Oﬀ) (7FH) . . . . . . . . . . . . . . . . . . . 14

9 Program Change 14

10 Channel Pressure (Aftertouch) 15

11 Pitch Bend Change 15

III System Message 16

12 Active Sensing 16

13 System Exclusive Message 16

13.1 Universal Real Time System Exclusive Message . . . . . . . . . . . . . . . . . . . . . . . . 16

13.2 Universal Non Real Time System Exclusive Message . . . . . . . . . . . . . . . . . . . . . 17

IV Setting Values and Send/ Receive Values 18

14 Setting Value Tables 18

14.1 Oﬀ/OnSettingValueTable................................... 18

14.2 –64 - 0 - +63 Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

14.3 PanSettingValueTable..................................... 18

14.4 Fine Tune Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

14.5 Reverb Type Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

14.6 Chorus Type Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

V MIDI Implementation Notation 20

15 Value Notation 20

15.1 HexadecimalNotation...................................... 20

15.2 BinaryNotation ......................................... 20

Part I

MIDI Message Overview

1 Product Conﬁguration as a MIDI Device

As a MIDI device, this Instrument consists of the Performance Controller Section and Sound Generator

Section described below. Each of these sections can send and receive speciﬁc MIDI Messages in accordance

with its function.

1.1 Performance Controller Section

The Performance Controller Section performs keyboard play, controller operations, etc., and generates

performance messages. Basically, generated performance messages are sent to external destinations while

also being transmitted to the Sound Generator Section. The channel number of the sent channel message

is in accordance with the Instrument’s instrument part number.

MIDI Output Performance Information The following describes the performance information

that is output and is not output as MIDI signals.

•Output performance

–Keyboard play and controller operations by the musician

•Non-output performance

–Demo Songs

–Recorded song playback(CDP-S160/EP-S130)

1.2 Sound Generator Section

The Sound Generator Section mainly performs receive of performance information and sound source

setting information. It consists of a common part that does not depend on the channel and a musical

instrument part that is independent of each channel.

1.2.1 Sound Generator Common Block

The common block consists of system eﬀects, mixer master control, etc. A number of the parameters of

these items can be controlled by universal system exclusive messages.

1.2.2 Instrument Part Block

The instrument part section consists of a total of 32 instrument parts, divided into two groups, named

Group A and Group B of 16 instruments each. Each part can perform operations and setting changes

using channel messages. Only Group B can be controlled by external channel messages.

As shown in the following table, there is a ﬁxed relationship between channel message receive channel

numbers and instrument parts.

Part Number Part Name Channel Assigned Function

00 A01 01 Keyboard(Main)

01 A02 02 Keyboard(Layer)

02 A03 03 Keyboard(Duet function, Left side)*

03 A04 04 Recorded song playback(Main)*

04 A05 05 Recorded song playback(Layer)*

05 A06 06 Recorded song playback(Duet function, Left side)*

06 A07 07 Operation Tone

07 A08 08 Metronome

08 A09 09 -

09 A10 10 -

10 A11 11 -

11 A12 12 -

12 A13 13 -

13 A14 14 -

14 A15 15 -

15 A16 16 -

16 B01 01 MIDI/Demo Song

17 B02 02 MIDI/Demo Song

18 B03 03 MIDI/Demo Song

19 B04 04 MIDI/Demo Song

20 B05 05 MIDI/Demo Song

21 B06 06 MIDI/Demo Song

22 B07 07 MIDI/Demo Song

23 B08 08 MIDI/Demo Song

24 B09 09 MIDI/Demo Song

25 B10 10 MIDI/Demo Song

26 B11 11 MIDI/Demo Song

27 B12 12 MIDI/Demo Song

28 B13 13 MIDI/Demo Song

29 B14 14 MIDI/Demo Song

30 B15 15 MIDI/Demo Song

31 B16 16 MIDI/Demo Song

Note :* = CDP-S160/EP-S130 only.

2 Timbre Type Speciﬁc Operation

The sound source operation performed for a sound generator instrument receive message may depend

on the value of the Timbre Type (see “About the Timbre Type” in “9 Program Change”) of each part’s

operation mode. For details, see the explanation for each message.

3 Conditions that Disable Message Send and Receive

The main conditions when MIDI message send and receive are disabled by the Instrument are thosedescribed

below.

•While the instrument is accessing ﬂash memory.

Part II

Channel Message

4 Receive Channel

The channel number of the channel message received by each part is shown in the table under “1.2.2

Instrument Part Block”.

5 Send Channel

Basically, the MIDI channel of the channel message sent when the Instrument is played coincides with

the MIDI channel of the part being played. Note, however, that the MIDI channel of the performance

information that corresponds to the keyboard main part depends on the MIDI Out Channel setting

value.

6 Note Oﬀ

Message Format: 8nH kkH vvH

9nH kkH 00H(receive only)

n: MIDI Channel Number

kk: Key Number

vv: Velocity(Send:40H, Receive:Ignored)

Transmit Sent when the keyboard is played. The key number changes in accordance with on the

Transpose function.

Receive Receipt stops a note being sounded by a note on message.

7 Note On

Message Format: 9nH kkH vvH

n: MIDI Channel Number

kk: Key Number

vv: Velocity

Transmit Sent when the keyboard is played. The key number changes in accordance with on the

Transpose function.

Receive Receipt sounds a note of the corresponding instrument part.

8 Control Change

Message Format: BnH ccH vvH

n: MIDI Channel Number

cc: Control Number

vv: Value

For details about messages, see each section of this manual that covers them.

8.1 Bank Select (00H,20H)

Message Format: BnH 00H mmH (MSB)

BnH 20H llH (LSB)

n: MIDI Channel Number

mm: MSB Value(Note1)

ll: LSB Value(Send:00H, Receive:Ignored)

Note1 :For details about the relationship between the MSB value and the tone, see the Tone List that comes with the

Instrument.

Transmit Sent when a tone is selected.

Receive Receipt causes a change in the tone bank number stored in Instrument memory, but the

tone is not actually changed until a Program Change message is received. For details, see “9 Program

Change”.

8.2 Modulation wheel or lever (01H)

Message Format: BnH 01H vvH

n: MIDI Channel Number

vv: Value

Receive Receipt adds, to the tone being sounded, modulation of a depth speciﬁed by the value. In

the case of a tone that already has modulation applied, receipt of this message increases the modulation

depth. The modulation eﬀect diﬀers according to the tone being used.

8.3 Portamento Time (05H)

Message Format: BnH 05H vvH

n: MIDI Channel Number

vv: Value

Receive Receipt changes the portamento application time.

8.4 Data Entry (06H,26H)

Message Format: BnH 06H mmH (MSB)

BnH 26H llH (LSB)

n: MIDI Channel Number

mm: MSB Value

ll: LSB Value

Transmit Sent when there is a change to the parameter assigned to RPN.

Receive Receipt changes the parameter assigned to RPN.

8.5 Channel Volume (07H)

Message Format: BnH 07H vvH

n: MIDI Channel Number

vv: Value

Receive Receipt changes the volume of the corresponding part.

8.6 Pan (0AH)

Message Format: BnH 0AH vvH

n: MIDI Channel Number

vv: Value(Note1)

Note1 :For information about the relationship between setting values and send/receive values, see “14.3 Pan Setting Value

Table” in “IV Setting Values and Send/Receive Values”.

Receive Receipt changes the pan of the corresponding part.

8.7 Expression Controller (0BH)

Message Format: BnH 0BH vvH

n: MIDI Channel Number

vv: Value

Receive Receipt changes the Expression value of the corresponding part.

8.8 Damper pedal (sustain) (40H)

Message Format: BnH 40H vvH

n: MIDI Channel Number

vv: Value (Note1)

Note1 :For information about the relationship between setting values and send/receive values, see the “14.1 Oﬀ/On Setting

Value Table” in “IV Setting Values and Send/Receive Values” of this document.

Transmit Sent when a pedal that has a sustain (damper) function is operated.

Receive Receipt performs an operation equivalent to a sustain pedal operation.

Timbre Type Speciﬁc Operation This operation diﬀers in accordance with the Timbre Type (see

“About the Timbre Type” in “9 Program Change”) setting.

•Timbre Type: Melody

Sustain oﬀ/on control is performed in accordance with the value of the received message.

•Timbre Type: Drum

The received message does not aﬀect sound source operation.

8.9 Portamento On/Oﬀ (41H)

Message Format: BnH 41H vvH

n: MIDI Channel Number

vv: Value (Note1)

Note1 :For information about the relationship between setting values and send/receive values, see the “14.1 Oﬀ/On Setting

Value Table” in “IV Setting Values and Send/Receive Values” of this document.

Receive Receipt changes the portamento on/oﬀ setting.

8.10 Sostenuto (42H)

Message Format: BnH 42H vvH

n: MIDI Channel Number

vv: Value (Note1)

Note1 :For information about the relationship between setting values and send/receive values, see the “14.1 Oﬀ/On Setting

Value Table” in “IV Setting Values and Send/Receive Values” of this document.

Transmit Sent when a pedal that has a sostenuto function is operated.(CDP-S160/EP-S130)

Receive Receipt performs an operation equivalent to a sostenuto pedal operation.

8.11 Soft Pedal (43H)

Message Format: BnH 43H vvH

n: MIDI Channel Number

vv: Value (Note1)

Note1 :For information about the relationship between setting values and send/receive values, see the “14.1 Oﬀ/On Setting

Value Table” in “IV Setting Values and Send/Receive Values” of this document.

Transmit Sent when a pedal that has a soft function is operated.(CDP-S160/EP-S130)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Casio Instrument de musique

Casio

Casio Privia PX-S1000 Manuel utilisateur

Casio

Casio Celviano AP-500 Manuel utilisateur

Casio

Casio Celviano AP-25 Manuel utilisateur

Casio

Casio Celviano GP-300 Manuel utilisateur

Casio

Casio Celviano AP-22S Manuel utilisateur

Casio

Casio AP-650M Manuel utilisateur

Casio

Casio Privia PX-S7000 Manuel utilisateur

Casio

Casio WK-1200 Manuel utilisateur

Casio

Casio 575E1A Manuel utilisateur

Casio

Casio CDP-135 Manuel utilisateur

Casio

Casio SK-5 - SERVICE Guide de dépannage

Casio

Casio CDP-S360 Manuel utilisateur

Casio

Casio PX-860 Manuel utilisateur

Casio

Casio SA-21 Manuel utilisateur

Casio

Casio CTK-2080 Manuel utilisateur

Casio

Casio SongBank SA-35 Manuel utilisateur

Casio

Casio Privia PX-100 Instructions d'installation

Casio

Casio PX-360M Manuel utilisateur

Casio

Casio Piano Sound CPS-50 Manuel utilisateur

Casio

Casio Casiotone MT-205 Manuel utilisateur

Casio

Casio AP-260 Manuel utilisateur

Casio

Casio DG-20 Manuel de l'opérateur

Casio

Casio Privia PX-A800 Manuel utilisateur

Casio

Casio Privia PX-S3000 Mode d’emploi

Manuels Instrument de musique populaires d'autres marques

Kawai

Kawai CN17 Manuel utilisateur

Yamaha

Yamaha PCY130 Manuel utilisateur

Korg

Korg SP-170S Manuel utilisateur

Roland

Roland ep-97 Manuel utilisateur

Roland

Roland LX-15 Manuel utilisateur

Johannus

Johannus Rembrandt 200 Manuel utilisateur

Yamaha

Yamaha Clavinova CVP-709 Manuel utilisateur

Yamaha

Yamaha YC-20 Manuel utilisateur

Yamaha

Yamaha Clavinova CVP-609 Manuel utilisateur

Yamaha

Yamaha PSR-E473 Manuel utilisateur

Modulus

Modulus Quantum Series Manuel utilisateur

Gear4music

Gear4music SDP-4 Manuel utilisateur

HOMCOM

HOMCOM 390-006 Manuel utilisateur

Xotic Guitars

Xotic Guitars ProVintage Series Manuel utilisateur

Sadowsky

Sadowsky MetroLine Series Manuel utilisateur

Bosendorfer

Bosendorfer CEUS Manuel utilisateur

Gewa

Gewa UP 260 G Manuel utilisateur

Yamaha

Yamaha Electone EL-17 Manuel utilisateur