Casio ID-17 Manuel utilisateur
Operation Guide ID-17
1
MA1508-EA © 2015 CASIO COMPUTER CO., LTD.
•A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using
the clock.
•Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
PM indicator
DATE (month - day)
Day of the week
Current time
(Hour, minutes, seconds)
Current Humidity
Current Temperature
OPERATING PRECAUTIONS
•Do not use or store this clock in areas exposed to temperature extremes, strong magnetism, strong vibration, or
strong impact.
•Heat can shorten battery life and cause malfunction. Keep the clock away from heaters and direct sunlight when
using it.
•Never use the clock in a bathroom or any other area subject to high humidity.
•Never try to take the clock apart. Doing so can cause malfunction.
•To clean the clock, use a soft, dry cloth or a cloth moistened in a solution of water and a mild neutral detergent.
Wring out all excess moisture from the cloth. Never use thinner, benzene, alcohol or other similar agents.
•The LCD may become difficult to read at temperatures outside of the operating temperature range (0 to 40°C).
•Display figures may be difficult to read when viewed from an angle.
•Be sure to keep all user documentation handy for future reference.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by you or
any third party arising through the use of this product or its malfunction.
1342
Wall hang hole
OK
Not OK
Operation Guide ID-17
2
GENERAL GUIDE
1
°C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
2
+ / – buttons
Use these buttons to change the setting that is flashing on the display.
3
SET button
Use this button when setting the current time.
4
RESET button
Press this button to reset the clock after replacing its batteries.
USING THE CLOCK
1. Press the SET button (
3
)to cycle through the setting screens as shown below.
Normal Timekeeping Screen Year Setting Screen
Contrast Setting Screen Month and Day Setting Screen
12-hour/24-hour Setting Screen Time Setting Screen
2. While the screen you want is displayed, use the + and – buttons (
2
)to change the flashing digits.
Press +to increase
the flashing digits.
Press –to decrease
the flashing digits.
•Holding down + or – changes the flashing digits at high speed.
•You can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance
with the date setting.
•Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00.
•Each press of + or – while the 12-hour/24-hour Setting Screen is on the display toggles between 12-hour and
24-hour timekeeping.
•You can set the contrast level in the range of 1 to 10.
3. After making the settings you want, use the SET button (
3
)to display the Normal Timekeeping Screen.
•The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about three minutes without performing any operation.
THERMOMETER FUNCTIONS
•A built-in sensor measures temperature and shows the measured value on the display.
•The temperature display shows “LO” for temperatures below –19.9°C (–3.8°F) and “HI” for temperatures above
49.9°C (121.8°F).
•Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such
readings are actually outside the guaranteed temperature range of this clock.
Switching between Celsius and Fahrenheit
•Push the °C/°F button (
1
) to select either Celsius (°C) or Fahrenheit (°F).
Celsius (°C) Fahrenheit (°F)
°C °F
°C/°F button (
1
)
HYGROMETER FUNCTIONS
A built-in sensor measures humidity and shows the measured value on the display.
•The humidity display shows “LO” for humidity below 10% and “HI” for humidity above 90%.
•Whenever the current temperature is outside the range of 0°C to 49.9°C, the humidity display will show “– –”.
Operation Guide ID-17
3
BATTERY REPLACEMENT
Replace batteries whenever the display of the clock becomes dim and difficult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove all of the old batteries.
3. Load a full set of new batteries. Make sure that their positive (+) and negative (–) ends face in the correct
directions. If you load batteries incorrectly, they can burst and damage the clock.
4. Press the RESET button (
4
). Be sure to press the RESET button (
4
)after replacing batteries.
5. Replace the battery compartment cover.
Battery precautions
•Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician
immediately.
•Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.
•Never mix old and new batteries, or batteries of different brands.
•Never charge the batteries.
•Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
•Replace the batteries at least once a year, even if the current batteries are working properly.
SPECIFICATIONS
Accuracy at Normal Temperature: ±60 seconds a month
Calendar System: Auto-calendar pre-programmed from the year 2000 to 2099
Thermometer Functions: Measuring range: –19.9°C to 49.9°C (–3.8°F to 121.8°F)
Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such
readings are actually outside the guaranteed temperature range of this clock.
Celsius (°C)/Fahrenheit (°F) switching
Temperature Sensor Precision: ±2°C (±4°F) in range of 0°C to 40°C (32°F to 104°F)
Hygrometer Function: Measuring range: 10% to 90%, when temperature is 0°C to 40°C (32°F to 104°F)
Humidity Sensor Precision: ±10%, when temperature is 5°C to 40°C (41°F to 104°F)
Other: 12/24-hour timekeeping
Battery: Two AA size batteries (Type: R6P)
Battery Life: Approximately 1 year
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Specifications are subject to change without notice.
Autres manuels Casio Horloge
Casio
Casio DQ-745S Manuel utilisateur
Casio
Casio 1675 Guide de configuration
Casio
Casio ID-15 Manuel utilisateur
Casio
Casio W-CLO.H Manuel utilisateur
Casio
Casio IDR-200 Manuel utilisateur
Casio
Casio ID-14 Manuel utilisateur
Casio
Casio TQ-216 Manuel utilisateur
Casio
Casio IQ-55 Manuel utilisateur
Casio
Casio ID-15S Manuel utilisateur
Casio
Casio TMR-72 Manuel utilisateur
Casio
Casio IQ-66 Manuel utilisateur
Casio
Casio 5155 Manuel utilisateur
Casio
Casio PQ-60 Manuel utilisateur
Casio
Casio TQ-362 Manuel utilisateur
Casio
Casio IQ-18W Manuel utilisateur
Casio
Casio 4323 Manuel utilisateur
Casio
Casio TQ-309 Manuel utilisateur
Casio
Casio TQ-377 Manuel utilisateur
Casio
Casio 5238 Manuel utilisateur
Casio
Casio MO0410-EA Manuel utilisateur
Manuels Horloge populaires d'autres marques
Silicon Laboratories
Silicon Laboratories SI5324 Manuel utilisateur
Heathkit
Heathkit GC-1005 Manuel utilisateur
Oregon Scientific
Oregon Scientific PRYSMA RMR221P Manuel utilisateur
Andrew O'Malley
Andrew O'Malley DOTKLOK Manuel utilisateur
ALGE-Timing
ALGE-Timing ASC3 Manuel utilisateur
Bodet
Bodet Profil 960 Manuel utilisateur
