CAS Scale ND 300 Manuel utilisateur
2
3
PRECAUTIONS................................................4
PREFACE..............................................................6
NAMESAND FUNCTIONS.....................6
INSTALLATIONS...........................................8
OPERATIONS..................................................11
1. General Weighing...........................................11
2. Weighing with Tare........................................11
ERROR MESSAGE......................................13
SPECIFICATIONS........................................13
CONTENTS
4
PRECAUTIONS
5
PRECAUTIONS
6
PREFACE
Thank you for purchasing our CAS ND-300 Series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have reliability.
This manual will help you with proper operation and care of the ND-300 Series.
Please keep this handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW
PREFACE & NAMESAND FUNCTIONS
7
DISPLAYAND KEYBOARD
■ND-300
■ND-300E, ND-300H
■KEY FUNCTIONS
KEYS FUNCTIONS
Used to correct the zero point.
Used to enter a tare weight.
Used to cancel a tare weight.
Whenthe weight is not stable,the display showstheaverageweight.
Turnson or offthedisplay.
PREFACE & NAMESAND FUNCTIONS
8
ND-300
1.Fix with bolts andnuts after insertingthe load
cellcableto support pole.andthen pleasefix
theground wirewith a boltandfix the bolthat
upit.
2.Pleaseinsert support coverintothe support
pole.
3.Pleasefix the headguide withbolt. 4.Pleaseconnect head partto Head guide
andfixit withStopbolt.
5.Pleaseinsert to supportcablehole after
connectingtheload cell cableandshield
cabStickthe power code tothe back of
theHeadpart.
INSTALLATIONS
9
ND-300H
1.Insertthe powerlineintothe support.
Fastenwithbolts andnuts. 2.Fixaground wire with bolt then arrangethe
powerlineandloadcell line.
3.Attachthe support coverto the support. 4.Attach the headto the supportthen fastenwith
stopbolt.
INSTALLATIONS
10
ND-300E
1.Insertthe powerlineintothe support.
Fastenwithbolts andnuts. 2.Fixaground wire with bolt then arrangethe
powerlineandloadcell line.
3.Attachthe support coverto the support. 4.Attach the headto the supportthen fastenwith
screw.
INSTALLATIONS
11
OPERATIONS
■When you turn on the power switch, the scale will count "00000" to "99999",
then the scale will read "0.0" on the display. This is called the ZERO state.
If the scale is not ZERO state though there is nothing on the platter, press the
ZERO key.
■If the weight is not stable, press the HOLD key. Then you will see the
average weight.
■The display indicates if the scale is at ZERO or if there is a TARE entered into
the scale by way of a ZERO and NET lamps.
1. General Weighing
■Wait until the display shows zero.
①Placeacommodityon
theplatter. ②Removethe commodity
fromtheplatter.
N▶OTE: The symbol represents the lamp on the display above.◀
OPERATIONS
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels CAS Scale Échelle
CAS Scale
CAS Scale LP-1000N series Manuel utilisateur
CAS Scale
CAS Scale CL5000-P Manuel utilisateur
CAS Scale
CAS Scale CL 5000 Manuel utilisateur
CAS Scale
CAS Scale EC-II Manuel utilisateur
CAS Scale
CAS Scale AP Series Manuel utilisateur
CAS Scale
CAS Scale LP-1000N series Manuel utilisateur
CAS Scale
CAS Scale LP Series Manuel utilisateur
CAS Scale
CAS Scale LP-1000N series Manuel utilisateur
CAS Scale
CAS Scale LP-1000 Series Manuel utilisateur
