Screen Control Methods (cont.)
AC trigger linkage setting between projector and projection screen:
1. Connect the AC trigger to the power interface of the projector first.
2. In the case of power on, press the "set" button behind the AC trigger
with a paper clip or something similar. At this time, the indicator light of
the AC trigger flashes for 3 times.Then press the turn on button of the
projector within 10s, wait 15 to 20 s, you can hear the buzzer for three
times, indicating that the projector is successfully connected with the AC
trigger.
3. Set the linkage between the AC trigger and the screen.Disconnect the
screen power first ，In the case of the AC trigger is powered on, press
and hold the COME button behind the AC trigger with a paper clip and
do not release it. At this time, the indicator light of the AC trigger flashes
three times. At this time, connect the screen power immediately and
release the COME button when you hear the buzzer for three times.
Then quickly press the COME button again within 5S, and then hear the
buzzer three times, indicating that the setting is successful.After the
above Settings are completed, when you turn on the projector, the
screen will automatically turn on; Conversely, when you turn o the
projector, the screen automatically turns o.
